Specific changes in human brain following reperfusion after cardiac arrest

BACKGROUND AND PURPOSE: Very few reports are available on serial changes in human brain after cardiac arrest. The primary objective of this study is to investigate sequential neuroradiological changes in patients remaining in a persistent vegetative state following resuscitation after cardiac arrest. METHODS: We repeatedly studied eight vegetative patients resuscitated from unexpected out-of-hospital cardiac arrest using computed tomographic (CT) scanning and high-field magnetic resonance (MR) imaging at 1.5 T. RESULTS: In seven of the eight patients, CT scans obtained between days 2 and 6 features symmetrical low-density lesions in the bilateral caudate, lenticular, and/or thalamic nuclei. These ischemic lesions were persistently of low density on serial CT scans. In these seven patients, MR images demonstrated what were thought to be hemoglobin degradation products derived from minor hemorrhages localized in the bilateral basal ganglia, thalami, and/or substantia nigra. Diffuse brain edema in the acute stage and diffuse brain atrophy in the chronic stage were consistent neuroradiological findings. No abnormal enhanced lesions were demonstrated by CT scans. CONCLUSIONS: The most characteristic findings on high-field MR images were symmetrical lesions in the bilateral basal ganglia, thalami, and/or substantia nigra with specific changes suggestive of minor hemorrhages that were not evident on CT scans. We speculate that these minor hemorrhages result from diapedesis of red blood cells in these regions during the reperfusion period through the endothelium disrupted by ischemia-reperfusion insult.     

Additives distribution and electrical properties in zinc oxide varistor prepared by a wet chemical method

Cobalt-, praseodymium-added zinc oxide varistor was prepared through a wet chemical method followed by sintering with or without calcination. Changes in grain size, compact density, additives distribution, and voltagecurrent/ capacitance-voltage relations were investigated for the characterization of the samples sintered at temperatures from 1473 to 1573 K without calcination or with calcination at 773 K for 2 h. The electrical properties were compared with nhose of samples prepared by two types of ball mill methods. The wet chemical method provided almost the same additives-distribution profile and less impurities in comparison with the ball grinding method carried out for 10–100 h. The donor concentration and the potential-barrier height for the samples were evaluated by Double Schottky Barrier Model. Addition of small amount of both cobalt and praseodymium in preparation by the wet chemical method was effective for a better nonlinearity relation between voltage and current, which has potential for a smaller sized varistor.     

水相酶促酯化法拆分dl－薄荷醇的连续操作

对影响脂肪酶活性、稳定性和对映选择性的因素，如有机溶剂和反应温度等首先进行了优化。其次，使用悬浮于环已烷的粉末状游离脂肪酶（ＣａｎｄｉｄａｃｙｌｉｎｄｒａｃｅａｌｉｐａｓｅＯＦ３６０）作生物催化剂，成功地构建了一个高效的非水相游离酶连续搅拌釜反应器。当使用高度反应性的丙酸酐作为薄荷醇的酰基给体，进行连续的酶促对映选择性酯化反应时，醇的转化率在两周内可保持４０％以上，所生成酯的光学纯度超过９５％ｅ．ｅ。但是，当使用相应的游离丙酸（而不是酸酐）作酰基给体时，薄荷醇的转化率在连续操作开始后迅速下降，表明使用酸酐时的生产力要比使用游离酸时高。最后，对底物溶液的浓度和流速进行了进一步优化；同时对反应器系统的含水量进行了监测，并通过对酸酐料液的浓度或流速进行微调的方法，有效地将有机溶液相的水分浓度控制在一定的范围（２～４ｍｍｏｌ／Ｌ）之内，结果，ｄｌ－薄荷醇对映选择性连续酯化反应非常稳定地运行了两个月之久（转化率４７～３５％，光学纯度９５～９８％ｅ．ｅ．），酶反应器的半衰期超过２００天。     

Combustion of Aluminum Particles near the Burning Surface in AP/AN Composite Propellants

Aluminum (Al) particles are commonly used in ammonium perchlorate (AP) composite propellants of solid rockets for increasing performance. When propellants including Al particles burn, Al particles easily agglomerate on the burning surface of the propellant. The diameters of agglomerated Al particles are greater than those of mixed particles. The combustion efficiency of the propellant decreases with increasing burning time of the agglomerated Al particles. Therefore, it is important to observe how the agglomerated Al particles burn on the burning surface of AP composite propellant. A lot of researchers have studied Al agglomerate characteristics. Previous studies clarified the relation between the agglomerated Al particle diameter and luminous flame diameter around Al particles near the burning surface. The shapes of luminous flames around agglomerated Al particles are spherical or elliptical. This study evaluates the shapes of the luminous flame around agglomerated Al particles at a constant diameter or a different diameter. When the proportion of the luminous flame diameter (D_f) to the diameter of agglomerated Al particles (D₀) is 1.54–1.71 at a constant D₀, the luminous flames are almost perfectly spherical. Otherwise, the luminous flames are elliptical at a constant D₀. Furthermore, when D_f/D₀ is close to the mean value, the luminous flame is more spherical than elliptical at different D₀. The evaporation rate and the burning rate of Al vapor are inversely proportional to D₀. The oxidation gas temperatures were changed and the activation energy of Al vapor was obtained as 39.2 kJ mol⁻¹.     

Production of functional substances from black rice bran by its treatment in subcritical water

Black rice bran was treated by water and subcritical water at temperatures ranging from 20 to 260 °C for 5 min and at 200 and 260 °C for 5-120 min. The bran extracts were analyzed for their radical scavenging activity, protein and carbohydrate contents, molecular-mass distribution, antioxidation activity, emulsifying activity, and emulsion-stabilizing activity. The radical scavenging activity and the protein content of the extract were higher at higher treatment temperature. The carbohydrate content also increased with increasing temperature up to 200 °C, then steeply decreased at the temperatures higher than 200 °C. The bran extracts treated at 260 °C for 5 min exhibited a suppressive activity toward autoxidation of linoleic acid with the increasing the weight ratio of the bran extract to linoleic acid. The bran extracts prepared at 40-200 °C for 5 min showed the emulsifying- and emulsion-stabilizing activities, while the extracts prepared at 220-260 °C were low in the activities.     

Enhancement of thermostability of kojibiose phosphorylase from Thermoanaerobacter brockii ATCC35047 by random mutagenesis

Random mutation by error-prone PCR was introduced into kojibiose phosphorylase from Thermoanaerobacter brockii ATCC35047. One thermostable mutant enzyme, D513N, was isolated. The D513N mutant enzyme showed an optimum temperature of 67.5-70 degrees C (the wild type, 65 degrees C), and thermostability up to 67.5 degrees C (the wild type, up to 60 degrees C). The half-lives of D513N were estimated to be 135 h at 60 degrees C, 110 min at 70 degrees C and 6 min at 75 degrees C, respectively. They were about 1.6-fold, 7-fold and 6-fold longer than those of the wild-type enzyme, respectively.     

Micro-/nanostructural investigation of laser-cut surfaces of single- and polycrystalline diamonds

Micrometer- to nanometer-scale structures of the cut surfaces of single- and polycrystalline diamonds by a pulsed ultraviolet laser have been thoroughly investigated by scanning and transmission electron microscopy. Within the laser-cut grooves, the processed diamond surfaces are extensively covered with laser-modified debris which consists of complex layered units of graphite with various crystallinities. The units consist of 1) highly oriented graphite, 2) corrugated graphite, and 3) nanocrystalline graphite, which are sequentially located from the surface of the underlying diamond substrate to the center of the grooves. Detailed textural examinations revealed that the highly oriented graphite unit is a product of the initial graphitization of diamond by a solid-state diffusion process, whereas the latter two units are deposition products from the liquid and/or vapor phases of carbon in the later stage. The present study demonstrates that the laser-cutting of diamonds proceeds in a two-step process: 1) extensive graphitization of laser-scanning path and 2) subsequent sublimation of the pre-formed graphite. These processes are basically identical among the three different types of diamonds (single crystal type Ib, single crystal type IIa and nano-polycrystalline aggregate) tested in this study.     

Morphology and mechanical properties of polyolefinic thermoplastic elastomer I. Characterization of deformation process

The structural origin of rubber elasticity in the polyolefinic thermoplastic elastomers composed of isotactic polypropylene (iPP) matrix and ethylene-propylene-diene rubber (EPDM) domains was investigated using scanning and transmission electron microscopes under uniaxial deformation and the computational analysis by a three dimensional finite element method. The rubber domains were dominantly deformed and elongated by accompanying localized yielding in iPP region between neighboring EPDM domains perpendicular to the stretching direction. The iPP region between adjacent EPDM domains in the stretching direction remained undeformed, suggesting that the undeformed iPP region plays the role in connecting rubber domains.