Re-evaluation of Radiation-Energy Transfer to an Extraction Solvent in a Minor-Actinide-Separation Process Based on Consideration of Radiation Permeability

ABSTRACT

Absorbed-dose estimation is essential for evaluation of the radiation tolerance of minor-actinide-separation processes. We propose a dose-evaluation method based on radiation permeability, with comparisons of heterogeneous structures seen in the solvent-extraction process, such as emulsions forming in the mixture of the organic and aqueous phases. A demonstration of radiation-energy-transfer simulation is performed with a focus on the minor-actinide-recovery process from high-level liquid waste with the aid of the Monte Carlo radiation-transport code PHITS. The simulation results indicate that the dose absorbed by the extraction solvent from alpha radiation depends upon the emulsion structure, and that from beta and gamma radiation depends upon the mixer-settler-apparatus size. Non-negligible contributions of well-permeable gamma rays were indicated in terms of the plant operation of the minor-actinide-separation process.     

An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding

Abstract

The I-shaped cross-sectional beam of CFRP (CFRP I-beam) is usually manufactured by the continuous protrusion method. Carbon fibers can only be arranged in the longitudinal direction. The CFRP I-beam with arbitrary arrangement of carbon fiber was manufactured with applying the electro-activated deposition molding method. The carbon fiber fabric was immersed in the deposition solution and energized, epoxy resin precipitated around carbon fiber and impregnated. The resin-impregnated fabric was installed to the mold, and the CFRP I-beam was fabricated. The CFRP I-beam was subjected to three-point bending tests, and the relationship between load-deflection was simulated by finite-element analysis.     

High-resolution long-array thermal ink jet printhead fabricated by anisotropic wet etching and deep Si RIE

This paper describes the fabrication and characterization of a thermal ink jet (TIJ) printhead suitable for high speed and high-quality printing. The printhead has been fabricated by dicing the bonded wafer, which consists of a bubble generating heater plate and a Si channel plate. The Si channel plate consists of an ink chamber and an ink inlet formed by KOH etching, and a nozzle formed by inductively couple plasma reactive ion etching (ICP RIE). The nozzle formed by RIE has squeezed structures, which contribute to high-energy efficiency of drop ejector and, therefore, successful ejection of small ink drop. The nozzle also has a dome-like structure called channel pit, which contributes to high jetting frequency and high-energy efficiency. These two wafers are directly bonded using electrostatic bonding of full-cured polyimide to Si. The adhesive-less bonding provided an ideal shaped small nozzle orifice. Use of the same material (Si substrate) in heater plate and channel plate enables the fabrication of high precision long printhead because no displacement and delamination occur, which are caused by the difference in thermal expansion coefficient between the plates. With these technologies, we have fabricated a 1" long printhead with 832 nozzles having 800 dots per inch (dpi) resolution and a 4 pl. ink drop volume.     

Network information criterion-determining the number of hiddenunits for an artificial neural network model

The problem of model selection, or determination of the number of hidden units, can be approached statistically, by generalizing Akaike's information criterion (AIC) to be applicable to unfaithful (i.e., unrealizable) models with general loss criteria including regularization terms. The relation between the training error and the generalization error is studied in terms of the number of the training examples and the complexity of a network which reduces to the number of parameters in the ordinary statistical theory of AIC. This relation leads to a new network information criterion which is useful for selecting the optimal network model based on a given training set.     

Aging time dependence of catastrophic optical damage (COD) failureof a 0.98-μm GaInAs-GaInP strained quantum-well laser

In this paper, we studied the aging time dependence of the catastrophic optical damage (COD) failure of an Al-free uncoated 0.98-μm GaInAs-GaInP strained quantum-well laser with an injection current as a parameter. Based on the stress-strength model, we first investigated experimentally the dependence of the critical power level (CPL) at which COD would take place upon the aging time. Then applying a statistical treatment to this result, we found for the first time that CPL data at each aging time could be considered to distribute according to the Weibull statistics, and the decrease rate of the CPL with the aging time depended very strongly on the injection current. Finally, using the relationship between the decrease rate of the CPL with the aging time and the current, we predicted roughly the time of a COD failure occurrence for both large and small current cases. As a result, we clarified that for our Al-free uncoated 0.98-μm laser, a COD failure became a fatal problem in the case of a large-current (high-power) operation     

DNA damage induced by m-phenylenediamine and its derivative in the presence of copper ion

We have previously reported that long-term priming of human polymorphonuclear neutrophilic granulocytes (PMN) with interferon-gamma (IFN-gamma) increased the fMLP-stimulated calcium influx. We now show that also after short-term incubation with IFN-gamma, PMN calcium metabolism is modulated. Single adherent cells in three different calcium-containing buffers (high, normal, and low [Ca2+]) were stimulated with the bacterial peptide fMLP or the Ca-ATPase inhibitor thapsigargin (Tg) after about 5 min preincubation with IFN-gamma. The results of this protocol indicated that IFN-gamma increases both calcium influx and calcium sequestration. Store dependent Ca2+ influx, directly measured on readdition of calcium to Tg-treated cells incubated in EGTA buffer, was significantly enhanced in IFN-gamma-treated cells. This effect of IFN-gamma was enhanced by the tyrosine kinase inhibitor herbimycin A. Strikingly, in low extracellular calcium concentrations, IFN-gamma induced calcium transients in 20%-60% of the cells. The proportion of PMN responding with Ca2+ transients increased with decreasing extracellular calcium concentration. Average lagtime from addition of IFN-gamma to a response that could be measured was 7.3 sec, and average increase in [Ca2+] above the basal level was 790 nM. These IFN-gamma-induced transients could not be depressed by herbimycin A. Thus, IFN-gamma can increase capacitative calcium influx, induce calcium transients, and possibly affect calcium sequestration in human PMN.     

25 Gbit/s selector module using 0.2 mu m GaAs MESFET technology

A high-speed selector module has been developed. It is constructed from a selector IC mounted in a ceramic package, a power supply unit, phase shifters, and coaxial cables. The IC was designed using LSCFL and fabricated with 0.2 mu m gate length GaAs MESFETs. The selector module operated above 25 Gbit/s. It is expected to be applied to high-speed IC measurements.<>     

A feasibility study of a direct-mapping parallel processing method to solve linear equations in load-flow calculation

With the growing size and complexity of power systems, system analysis—such as transients calculation—takes much time. Hence, fast calculation methods are required. Although parallel processing is a hopeful method, there have been difficulties in the parallel solution of linear equations which appear in power-flow calculations by the Newton-Raphson method. This paper aims at the fast calculation of the power-flow problem by means of parallel processing. In order to improve the suitability to the parallel solution of the differential equation in transients calculation, we assume the use of a direct-mapping parallel processing machine to map directly the network of a power system onto a network of processors. Under this assumption, we propose a new parallel-processing-oriented method in which the linear equation is solved by linear iterations between nodes with Aitken acceleration. We simulate the method on three model power systems and compare this Parallel Iterative Method (PIN) with a Parallel Direct Method (PDM) which uses the banded matrix according to the number of operations required. As a result, we can expect that PIM may solve linear equations faster than PDM with m processors, although the PIM might be inferior to the PDM with m × m processors, where m denotes the half-band width of the banded matrix.     

A Composite Index of Compliance for Chronic In‐Center Hemodialysis Patients

We developed a composite compliance index as the sum of the compliance scores for interdialytic weight gain (IDWG), pre‐dialysis serum potassium and phosphorus concentrations (each scored from zero to 3, with 3 indicating the poorest compliance), and skipping hemodialysis sessions (scored from zero to 9, with 9 indicating the poorest compliance). We used this composite score to prospectively evaluate compliance in 25 prevalent hemodialysis patients over a period of 1 year. We then followed these patients for another 3.5 years. The patients studied were divided into two groups: group A (poor compliance) consisted of 9 subjects with composite score ≥ 9 (13.2 ± 3.2); group B (better compliance) consisted of 16 subjects with composite score < 9 (4.7 ± 1.8). Age, duration of hemodialysis, and frequency of diabetes mellitus did not differ between the groups. Group A contained higher fractions of subjects with history of alcoholism (66.7% vs 12.5%, p = 0.010), other substance addiction (44.4% vs 0%, p = 0.010), and severe psychosocial problems (88.9% vs 18.8%, p = 0.002). Mean survival from the beginning of observation, estimated by actuarial life‐table survival analysis, was 1.19 years in group A and 2.60 years in group B (p = 0.0265). A composite compliance index incorporating domains indicating adherence to diet, medications, and dialysis schedule identified other behavioral problems in poorly compliant patients. Hemodialysis patients characterized by this composite index as poorly compliant had shortened survival.     

Survey of switching techniques in high-speed networks and their performance

One of the most promising approaches for high speed networks for integrated service applications is fast packet switching, or ATM (asynchronous transfer mode). ATM can be characterized by very high speed transmission links and simple, hard-wired protocols within a network. To match the transmission speed of the network links, and to minimize the overhead due to the processing of network protocols, the switching of cells is done in hardware switching fabrics in ATM networks. A number of designs have been proposed for implementing ATM switches. Although many differences exist among the proposals, the vast majority of them are based on self-routeing multistage interconnection networks. This is because of the desirable features of multi-stage interconnection networks such as self-routeing capability and suitability for VLSI implementation. Existing ATM switch architectures can be classified into two major classes: blocking switches, where blockings of cells may occur within a switch when more than one cell contends for the same internal link, and non-blocking switches, where no internal blocking occurs. A large number of techniques have also been proposed to improve the performance of blocking and non-blocking switches. In this paper, we present an extensive survey of the existing proposals for ATM switch architectures, focusing on their performance issues.