A high-speed vector-controlled spindle motor drive with closedtransition between with encoder control and without encoder control

A 40000-r/min vector-controlled induction motor drive is introduced. The vector control of induction motors has been widely accepted in spindle drives of machine tools where they replace conventional DC motors because of the low maintenance requirements. Another important feature of the AC spindle drive is its high-speed capability. The magnetic encoder is most widely used as the speed detector because it is suited for use in an adverse environment. However, the magnetic encoder with high resolution and a high S/N ratio loses the output pulses at extremely high speed. In the drive system introduced, the conventional vector control is used in the low-speed range, and the vector control without the encoder is used in the high-speed range. Close transition between two modes is made without interrupting the operation     

A case of aneurysm of the descending thoracic aorta associated with Beh?et's disease]

A 66-year-old male with Beh?et's disease admitted again with hemoptysis. He underwent the resection and direct closure of descending aortic aneurysm 3 years ago, followed without the use of steroid. Chest CT scanning demonstrated a recurrent aneurysm of the descending aorta which was could not be detected on the previous CT only 23 days before. In the current operation, we performed resection, direct closure and wrapping of the aneurysm. The pathological examination showed a true aneurysm of Beh?et's disease. The patient is free from recurrence for 17 months since the operation under steroid therapy.     

Effects of Annealing on Dielectric Loss and Microstructure of Aluminum Nitride Ceramics

The effect of annealing on tan δ and microstructures of aluminum nitride (AlN) ceramics were explored. Yttria was added as a sintering additive to AlN powders, and the powders were pressureless-sintered at 1900°C for 2 h in a nitrogen flow atmosphere. In succession to sintering, AlN samples were annealed at 720, 970 and 1210°C for 2 and 4 h. Very low tan δ values between 2.6 and 6.0 × 10⁻⁴ at 28 GHz were obtained when the AlN samples were annealed for 4 h at all the annealing temperatures.     

Cationic copolymerization behavior of a bicyclic orthoester having hydroxy group with glycidyl phenyl ether and volume change on their copolymerization

This article describes cationic ring‐opening copolymerization of a bicyclic orthoester having hydroxy group (BOE‐OH) and glycidyl phenyl ether (GPE), and the volume shrinkage behavior during the copolymerization. THF soluble polyethers [poly(BOE‐OH‐co‐GPE)] were obtained by the copolymerizations at 80–180°C, while crosslinked poly(BOE‐OH‐co‐GPE) was obtained by the copolymerizations at 220–250°C. This crosslinking reaction may originate from the dehydration of methylol groups in the side chain of poly(BOE‐OH‐co‐GPE). The volume shrinkage during the cationic copolymerization reduced as the increase of the BOE‐OH feed ratio. By contrast, the volume shrinkage on the crosslinking polymerization was almost independent on the BOE‐OH feed ratio. Poly(BOE‐OH‐co‐GPE)s with higher BOE‐OH composition showed lower thermal weight loss temperature owing to the release of H₂O by dehydration of methylol groups. The BOE‐OH component in the THF soluble poly(BOE‐OH‐co‐GPE)s lowered the glass transition temperature (T_g), while that in the crosslinked poly(BOE‐OH‐co‐GPE) increased the T_g probably because of the higher crosslinking density. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1356–1361, 2006     

Formation of Zirconia Solid Solutions Containing Alumina Prepared by New Preparation Method

In the system ZrO₂–Al₂O₃, a new method for preparing ZrO₂ solid solutions from ZrCl₄ and AlCl₃ using hydrazine monohydrate is investigated. c -ZrO₂ solid solutions containing up to ∼40 mol% Al₂O₃ crystallize at low temperatures from amorphous materials. The formation mechanism is discussed from IR spectral data. The values of the lattice parameter α increase linearly from 0.5072 to 0.5105 nm with increasing Al₂O₃ content. At higher temperatures, transformation of the solid solutions proceeds as follows: c ( SS ) → t ( ss ) → t ( ss ) +α-Al₂O₃→ m +α-Al₂O₃. m -ZrO₂–α-Al₂O₃ composite ceramics are fabricated by hot isostatic pressing for 2 h at 1250°C and 196 MPa. Microstructures and mechanical properties are examined, in connection with increasing Al₂O₃ content.     

Augmented reality-based block piling game with superimposed collapse prediction

Understanding what cannot be seen is difficult. Physical behavior can be explained on the basis of physical theories even if the behavior cannot be observed. Explanation of what is physically happening in the real world would become easy, however, if annotations were superimposed on the real objects. Herein, the authors demonstrate how an understanding of a physical event can be facilitated by overlapping a real-world situation with a simulation that predicts a future state. This idea is demonstrated in a game application in which a player stacks blocks into a pile until it collapses. In general, it is easy to estimate whether a block on the edge of a table will fall or not. However, it is more difficult to predict whether a stack of many blocks will collapse, and in what manner the stack will collapse. Even though previous research has demonstrated that the problem of how two-dimensionally stacked blocks collapse can be reduced to solving a sequence of convex quadratic programs, algorithms for convex quadratic programs require massive computational resources. Hence, the authors developed a fast and new algorithm based on a linear program. The proposed algorithm realizes real-time simulation based on physics that superimposes predicted collapse. The block that is predicted to fall is superimposed on the real block with a lit background projection. The system was evaluated in an experiment, and superimposed augmented reality annotation was observed to be efficient. The system was also demonstrated in game contests and received positive feedback and comments.     

Hypotensive effect of a sweetpotato protein digest in spontaneously hypertensive rats and purification of angiotensin I-converting enzyme inhibitory peptides

We have investigated angiotensin I-converting enzyme (ACE) inhibitory activity in an enzyme digest of sweetpotato protein, the antihypertensive effect of the digest in spontaneously hypertensive rats (SHR), and the identification of an ACE inhibitory peptide. Protein was prepared from squeezed juice of sweetpotato by isoelectric focusing precipitation. Three kinds of proteases were selected for effective protein digestion. The digest, sweetpotato peptide (SPP), exhibited strong ACE inhibitory activity (IC₅₀: 18.2 μg/ml). SPP was orally administered by gavage to SHR at a dose of 100 mg/kg or 500 mg/kg. The systolic blood pressure and the diastolic blood pressure were measured at 0 (before administration), 2, 4, 8, and 24 h after administration. A dose-dependent decrease in systolic blood pressure in SHR was observed after oral administration of SPP. Significant differences between SPP-administered rats and control rats were observed 4 and 8 h after administration in the 500 mg/kg-administered group and 8 h after administration in the 100 mg/kg-administered group. Diastolic blood pressure also decreased in the SPP-administered groups, although the difference between SPP-administered rats and control rats was not significant. These results suggest that SPP may be useful in the prevention or treatment of hypertension. Peptides with ACE inhibitory activity were purified from SPP by absorption chromatography and preparative HPLC using an ODS column. The amino acid sequences of isolated peptides were I-T-P, I-I-P, G-Q-Y and S-T-Y-Q-T; their ACE inhibitory activities (IC₅₀) were 9.5 μM, 80.8 μM, 52.3 μM and 300.4 μM, respectively. In conclusion, I-T-P is a novel, strong ACE inhibitory peptide.     

High-Performance Vector-Controlled AC Motor Drives: Applications and New Technologies

A high-performance ac motor control has been developed by employing the vector control concept. Its versatility has been proven through the six years of experience in applications to pinch roll drives of continuous casting plants, machine tool spindle drives, and other drive systems in industry. Equivalent torque characteristics are achieved with ac motors compared to dc motors without direct detection of the magnetic flux. The effect of rotor temperature on the torque characteristics has been compensated to a satisfactory level in actual industrial use by various means. Servo drives, both synchronous motor and induction motor types, have been introduced. The test results show that the performance of ac servo drives is equivalent or superior to that of the PWM-controlled dc servo drives. Furthermore, an example of the direct-drive servo is described, where an ultra-low speed high-torque motor and an ultra-high resolution position sensor play key roles. In addition, the possibility of a more sophisticated servo drive exploiting modern control theory is suggested.     

Transition of sulfospinel to Th3P4 type phase under pressure

Sulfospinels AB₂S₄ (A=Mg, Mn, B=Tm, Yb) were treated at 1000°C and 55 kbar for 1h. The X-ray powder diffractions were completely indexed by assuming that the products were isostructural with Th₃P₄. The results of density measurements showed a good agreement with those calculated from the X-ray data. No magnetic ordering was observed in temperatures down to 77K.