Hydrogen production through dry reforming of biogas using a porous electrochemical cell: Effects of a cobalt catalyst in the electrode and mixing of air with biogas

This paper reports the performance of porous Gd-doped ceria (GDC) electrochemical cells with Co metal in both electrodes (cell No. 1) and with Ni metal in the cathode and Co metal in the anode (cell No. 2) for CO₂ decomposition, CH₄ decomposition, and the dry reforming reaction of a biogas with CO₂ gas (CH₄ + CO₂ → 2H₂ + 2CO) or with O₂ gas in air (3CH₄ +?1.875CO₂ +?1.314O₂ → 6H₂ +?4.875CO +?0.7515O₂). GDC cell No. 1 produced H₂ gas at formation rates of 0.055 and 0.33?mL-H₂/(min?m²-electrode) per 1?mL-supplied gas/(min?m²-electrode) at 600?°C and 800?°C, respectively, by the reforming of the biogas with CO₂ gas. Similarly, cell No. 2 produced H₂ gas at formation rates of 0.40?mL-H₂/(min?m²) per 1?mL-supplied gas/(min?m²) at 800?°C from a mixture of biogas and CO₂ gas. The dry reforming of a real biogas with CO₂ or O₂ gas at 800?°C proceeded thermodynamically over the Co or Ni metal catalyst in the cathode of the porous GDC cell. Faraday's law controlled the dry reforming rate of the biogas at 600?°C in cell No. 2. This paper also clarifies the influence of carbon deposition, which originates from CH₄ pyrolysis (CH₄ → C + 2H₂) and disproportionation of CO gas (2CO → C + CO₂), on the cell performance during dry reforming. The dry reforming of a biogas with O₂ molecules from air exhibits high durability because of the oxidation of the deposited carbon by supplied air.     

High Gd Concentration GaGdN Grown at Low Temperatures

GaGdN layers were grown at temperatures below 300°C by radio-frequency plasma-assisted molecular beam epitaxy on sapphire substrates. GaGdN samples with high Gd concentration as high as 12.5% were obtained by lowering the growth temperature. X-ray diffraction results showed no obvious secondary phase, which means that the phase separation can be suppressed by the growth at low temperatures. All samples, including those grown at room temperature, showed ferromagnetic characteristics. Photoluminescence emission was observed, though spectra exhibit broad and sharp luminescence bands related to many kinds of defects. It is suggested that electrons coming from defects, especially, nitrogen vacancy, stabilize ferromagnetism, and that the carrier-induced ferromagnetism occurs in the low-temperature-growth GaGdN.     

Segregation in sputtered Co-Cr films

The segregation growth process in sputtered Co-Cr films is investigated by examining the effect of substrate temperature on the segregated microstructure and magnetic properties. In sputtered Co-25at%Cr films, segregation occurs below 560°C, and both the saturation magnetization and the perpendicular anisotropy constant show a maximum around a substrate temperature of 300°C, where a specific microstructure, called a CP (chrysanthemum-like pattern) structure, is observed. The results suggest that the CP structure becomes observable in the highly segregated state and generates high perpendicular anisotropy. A new segregation growth model is derived from the results of the CP structure observations. Using this model, it is possible to explain the continuous transition of the magnetization mode between the continuous and the particulate modes.     

Cognitive model of team cooperation in en-route air traffic control

Since controller teams are in charge of en-route air traffic control, team cooperation is a key issue for good control performance. We conducted ethnographic field observation at the Tokyo Area Control Center and then analyzed the obtained data to develop a cognitive model of team cooperation in en-route air traffic control. We segmented conversational records, behavioral records, and so on by control unit, and then clarified relations between the segments and identified expert knowledge and judgment behind them. Cognitive processes of controller teams were reconstructed based on a concept of distributed cognition. The analysis revealed that the mutual belief model is applicable to team cooperation processes, the role assignment of tasks within a controller team is implicit and that control plans are implemented smoothly once team situation awareness has been established. A cognitive model of controllers?? team cooperation has been constructed based on these findings.     

New Preparation Method of CdS Clusters Encapsulated in Y-Type Zeolites

CdS clusters encapsulated in Y-type zeolite were prepared by a novel technique with non-aqueous systems. The mechanical mixture of CdCl₂· 2.5H₂O crystal with Y-type zeolite was heated at 773 K, followed by the H₂S treatment at 373 K, resulting in the formation of CdS clusters with the size <2.3 nm.     

Sterols ofKalanchoe pinnata: First report of the isolation of both C-24 epimers of 24-alkyl-Δ25-sterols from a higher plant

Eighteen sterols were isolated from the aerial parts ofKalanchoe pinnata (Crassulaceae) including four novel sterols,viz. (24R)-stigmasta-5,25-dien-3β-ol (24-epiclerosterol), (24R)-5α-stigmasta-7,25-dien-3β-ol, 5α-stigmast-24-en-3β-ol, and 25-methyl-5α-ergost-24(28)-en-3β-ol. 24-Epiclerosterol and its Δ⁷-analog occur together with their 24S/β-epimers in the same plant making this the first report of the isolation of both C-24 epimers of Δ²⁵-unsaturated 24-alkylsterols from a non-marine organism. Iodine-catalyzed isomerization of stigmasta-5,24-dien-3β-ol (24-ethyldesmosterol), the main sterol ofK. pinnata, yielded 24-epiclerosterol among other products.     

Preparation of plasma-polymerized membranes from I-(trimethylsilyl)-I-propyne and gas permeability through the membranes

Summary Plasma-polymerized membranes for gas separation were prepared from 1-(trimethylsilyl)-1-propyne. The permeation data of He, H₂ 0₂, N₂, CO₂, and CH₄ through the membranes showed plasma-polymerized 1-(trimethylsilyl)-1-propyne had high permselectivity but low permeability compared with poly[l-(trimethylsilyl)-1-propyne]. This behavior is considered to be due to the crosslinking structure of the plasma-polymerized membrane. The correlation between plasma polymerization conditions and the membrane performance was studied. The optimum condition at which the deposition rate of the plasma polymer is maximized agreed with the optimum value to yield maximum separation factor of gases through the membrane.     

Fe-Cr-Mn奥氏体合金的辐照体胀与诱起晶界偏析行为的研究SCIEI

本文采用电子束辐照,研究了Fe-15Cr-xMn合金以及添加W,V合金的孔洞体胀和诱起晶界偏析行为,并对包含晶界在内的辐照区进行成分分析。结果表明,在Fe-Cr-Mn系合金中孔洞体胀孕育期可以被强烈抑制,晶界偏析也减少。特别是,合金中添加W,V效果更加明显。用Mn代替Ni,通常要发生体胀和相的不稳定性,由于反Kirkendall效应导致Ni和Mn的扩散行为不同,使Fe富集在尾闾处,局部地区形成铁素体,有利于减少体胀和晶界偏析。     

Bayesian inference explains perception of unity and ventriloquism aftereffect: identification of common sources of audiovisual stimuli

We study a computational model of audiovisual integration by setting a Bayesian observer that localizes visual and auditory stimuli without presuming the binding of audiovisual information. The observer adopts the maximum a posteriori approach to estimate the physically delivered position or timing of presented stimuli, simultaneously judging whether they are from the same source or not. Several experimental results on the perception of spatial unity and the ventriloquism effect can be explained comprehensively if the subjects in the experiments are regarded as Bayesian observers who try to accurately locate the stimulus. Moreover, by adaptively changing the inner representation of the Bayesian observer in terms of experience, we show that our model reproduces perceived spatial frame shifts due to the audiovisual adaptation known as the ventriloquism aftereffect.