Polarity Effect and Electromagnetic Radiation of Partial Discharge Accompanying Growth of Electrical Tree

We have investigated the characteristics of radiated electromagnetic (EM) waves from positive and negative partial discharges (PD) in epoxy resin and cross‐linked polyethylene. We found that there is a correlation among the EM level from PD, the positive PD current, and electrical trees. Therefore, the growth of an electrical tree produces a lot of positive PD. We have also investigated the characteristics of the frequency region of EM waves from PD in air, insulating oil, and liquid epoxy in addition to the above insulators. EM waves were detected in the frequency region of 40 MHz to 300 MHz from positive and negative PD in epoxy resin and cross‐linked polyethylene. EM waves were also detected in the frequency region of 40 MHz to 150 MHz from positive and negative PD in air. In the case of insulating oil and liquid epoxy, EM waves were detected in the frequency regions of 40 MHz to 150 MHz from positive PD, and 40 MHz to 250 MHz from negative PD. The frequency region differed depending on the material and the discharge polarity. Our investigation indicates that the cause is differences in electric field strength at the time of PD occurrence.     

Recovery of fluorocarbons in Japan as a measure for abating global warming

The objective of this study is to evaluate the potential for recovering fluorocarbons as measures for the abatement of global warming. In this study, we focused on the three different kinds of fluorocarbons: CFCs, HCFCs and HFCs, and targeted refrigerant use because of the availability of relevant data. We first estimated future fluorocarbon emissions from the targeted appliances; we next compared those emissions in the units of CO₂ equivalent to the level of CO₂ emissions in 1990 from a quantitative point of view. As the result of this study, it was found that fluorocarbon emissions in 1999 and 2010 would be equal to approximately 7 and 3% of the level of CO₂ emissions in 1990 respectively. Moreover, if we implement a 100% recovery rate in every recovery route, we can reduce a large amount of emissions which correspond to approximately 2–5% of the level of CO₂ emissions in 1990, even if we take into account the energy-related CO₂ emissions by the transportation and decomposition of fluorocarbons.     

Temporal Specificity of Extinction in Autoshaping.

Three experiments investigated the effects of varying the conditioned stimulus (CS) duration between training and extinction. Ring doves (Streptopelia risoria) were autoshaped on a fixed CS-unconditioned stimulus (US) interval and extinguished with CS presentations that were longer, shorter, or the same as the training duration. During a subsequent test session, the training CS duration was reintroduced. Results suggest that the cessation of responding during an extinction session is controlled by generalization of excitation between the training and extinction CSs and by the number of nonreinforced CS presentations. Transfer of extinction to the training CS is controlled by the similarity between the extinction and training CSs. Extinction learning is temporally specific. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Chaos control and noise suppression in external-cavitysemiconductor lasers

Feedback-induced chaos and intensity noise enhancement in a laser diode with external optical feedback are studied by computer simulations. The enhancement of relative intensity noise (RIN) that is often observed in experiments is considered as a result of the feedback-induced deterministic chaos and the intensity noise suppression is treated from the viewpoint of chaos control. Especially, the conventional noise suppressing technique known as a high-frequency injection modulation is turned into a problem of stabilizing chaos through parameter modulations. We developed an analytical method which allows to optimize the modulation frequency from the linear stability analysis of the dynamical model that describes the laser diode with external feedback. The robustness of the modulation with respect to the modulation frequency and depth is verified and the results suggest the feasibility of applying our method to actual noise suppression. The RIN in the low-frequency region (up to 100 MHz) is shown to be reduced to the solitary laser level when the feedback-induced chaos is effectively controlled with the optimized modulation frequency     

Pulmonary vascular disease and operative indications in complete atrioventricular canal defect in early infancy

Pulmonary vascular disease was morphometrically analyzed in 67 patients (mean age, 19 months) with isolated complete atrioventricular canal defect. Complete obstruction of the small pulmonary arterial lumen resulting from acute fibrous proliferation and atrophy of the peripheral arterial media, which were considered absolute operative contraindications, were characteristic in six patients with Down's syndrome. Morphometric analysis of medial thickness revealed that thinning of the media of the small pulmonary arteries is generally observed at around 6 months of age in patients with complete atrioventricular canal defect and that the media in patients who have complete atrioventricular canal defect and Down's syndrome was thinner than that in such patients without Down's syndrome. These results suggest that thinning of the media as a result of two factors--Down's syndrome and aging--facilitates the rapid occurrence of fibrous intimal proliferation. Therefore intracardiac repair is desirable within 6 months of life, before medial thinning, in patients with complete atrioventricular canal defect and Down's syndrome. Excluding patients with absolute operative contraindications, the scores of the index of pulmonary vascular disease in operative survivors were below 2.0 and death occurred when scores were more than 2.2. The pulmonary vascular resistances measured in room air and by the oxygen inhalation and tolazoline tests in patients with operative contraindications were more than 7.3, 3.8, and 6.6 units.m2, respectively. We thus conclude that lung biopsy should be undertaken for patients in whom pulmonary vascular resistance is beyond these values to determine the appropriateness of surgical intervention.     

Graphite formation on Ni film by chemical vapor deposition

Thin film formation of graphite by chemical vapor deposition using 2-methyl-1,2′-naphthyl ketone as a starting material was carried out on Ni film substrates. On Ni films directly deposited on quartz glass, the graphite films were obtained when the Ni film thickness was above 1 000 Å and above 5 000 Å at 700 °C and 1 000 °C, respectively. Depositions on thinner Ni film substrates comprise amorphous carbon (a-C) or graphite tubes which was owing to the thermal coagulation of the Ni film into droplets. On the other hand, graphite film was obtained on the Ni film with thickness 10 Å when a-C was inserted between the Ni film and the quartz glass. The coagulation of the Ni film is considered to be avoided by inserting a-C layer.     

Fibre Bragg grating compression-tuned over 110 nm

A fibre Bragg grating with a tuning range covering beyond the C- and L-bands has been realised, which represents the broadest tuning range reported of any Bragg grating. The device exhibits constant spectral response and polarisation mode dispersion within these bands.     

Survey of switching techniques in high-speed networks and their performance

One of the most promising approaches for high speed networks for integrated service applications is fast packet switching, or ATM (asynchronous transfer mode). ATM can be characterized by very high speed transmission links and simple, hard-wired protocols within a network. To match the transmission speed of the network links, and to minimize the overhead due to the processing of network protocols, the switching of cells is done in hardware switching fabrics in ATM networks. A number of designs have been proposed for implementing ATM switches. Although many differences exist among the proposals, the vast majority of them are based on self-routeing multistage interconnection networks. This is because of the desirable features of multi-stage interconnection networks such as self-routeing capability and suitability for VLSI implementation. Existing ATM switch architectures can be classified into two major classes: blocking switches, where blockings of cells may occur within a switch when more than one cell contends for the same internal link, and non-blocking switches, where no internal blocking occurs. A large number of techniques have also been proposed to improve the performance of blocking and non-blocking switches. In this paper, we present an extensive survey of the existing proposals for ATM switch architectures, focusing on their performance issues.