An environment-friendly technology for ceramic materials based on the recovery of industrial wastes

A range of ceramic materials with low sintering temperature have been developed using ceramic and glass wastes (up to 70%). Properties of the newly synthesized materials are given, and areas of application and fabrication methods are discussed.__________Translated from Novye Ogneupory, No. 10, pp. 39 – 41, October, 2004.     

Betulinic Acid in Complex with a Gamma-Cyclodextrin Derivative Decreases Proliferation and in Vivo Tumor Development of Non-Metastatic and Metastatic B164A5 Cells

Betulinic acid, a very promising anti-melanoma agent, has very low water solubility that causes low bioavailability. To overcome this inconvenience, a highly water-soluble cyclodextrin was used (octakis-[6-deoxy-6-(2-sulfanyl ethanesulfonic acid)]-γ-cyclodextrin). The complex was physico-chemically analyzed using differential scanning calorimetry (DSC), X-ray and scanning electron microscopy (SEM) methods and then in vitro tested for its antiproliferative activity by the MTT assay and by cell cycle analysis. Finally, the complex was tested in vivo using an animal model of murine melanoma developed in C57BL/6J mice, where it caused a reduction in tumor volume and weight. The study revealed the beneficial influence of betulinic acid inclusion into the cyclodextrin in terms of antiproliferative activity and in vivo tumor development.     

Comparative Study of 9×19 mm Ammunition Combustion Products and Residues

During the last decades, authorities’ awareness on environmental and human health impact at national and international level has increased in the field of small arms ammunition containing lead and antimony. Thus, the evolution of environmental policies regarding production and use of heavy metals and their compounds, especially in EU countries, implied extensive studies on the environmental implications of 9×19 mm caliber ammunition use, especially in indoor shooting ranges. In this context, the paper describes the experimental studies performed on Pb‐containing conventional FMJ (full metal jacketed) ammunition and comparative measurements on new ammunition designed for training. The combustion products and residues from conventional Pb‐containing ammunition and Cu‐based “greener” ammunition were compared in terms of gaseous products, metal concentration in aerosols and metal concentrations in solid residues. Gas emissions and solid residues were measured for four different types of ammunitions. The results showed that the copper content of the residue is significantly higher in case of Cu‐containing composite bullets. For the ammunition equipped with Pb bullet, an important percentage of the Pb residue is generated by erosion of the exposed part of the bullet core. On the other hand, the ammunition containing Cu‐composite bullet generates large quantities of Cu residues, which have similar environmental impact and less impact on human health. Gas analysis indicated the presence of CO and NO_x and, surprisingly, high concentrations of HCN, CH₄, and NH₃. Lower gas concentrations are obtained for the composite bullets due to an incomplete combustion of gun propellant.     

Surface morphology effects of post-implantation annealing in thin amorphous films of the As-Se system

The effects of ion implantation and subsequent annealing on the surface morphology of thin amorphous chalcogenide films of the As-Se system have been studied. Ion implantation of nitrogen (N⁺) with an energy E=100 keV and high doses (typically D=1.10¹⁶ cm⁻²) has been carried out at room temperature. Subsequent thermal annealing treatments near the melting temperature (T_g∼160°C) have been performed leading to changes in the thin-film morphology, which are dependent on the As content and are best expressed for the As₃Se₂ films. Optical microscope photographs reveal details of the rippled surface exhibiting quasi-regular domain-like structure. The parameter λ, describing it, is dependent on the film thickness and grows with its increase. Thermal annealing near T_g also influences the diffuse optical reflectivity—it increases considerably while the interference features tend to disappear with the appearance of the rippled film surface structure and the effect is again greater for the thicker films.     

Effect of brighteners on hydrogen evolution during zinc electroplating from zincate electrolytes

Hydrogen evolution during zinc electrodeposition on a steel substrate from zincate electrolytes containing different additives was studied using various experimental techniques.The hydrogen evolution reaction is limited by the electron transfer step. Hydrogen evolution is most intensive during the first seconds from the beginning of electrodeposition due to the lower overpotential of hydrogen on steel as compared with that on zinc. The evolved hydrogen is dissipated in three ways. Most is dissipated to the atmosphere via gas bubbles at a constant rate. Some is dispersed in the electrolyte some diffuses into the steel substrate, predominantly at the commencement of deposition. The additives affect both the total amount of evolved hydrogen and its distribution. The highest amount of hydrogen is evolved in the presence of the anisaldehyde bisulphite containing composite additive. The highest amount of hydrogen included in the substrate and remaining in the electrolyte corresponds to the use of the Na–N-benzylnicotinate containing additive. In this case blistering is observed.     

Development of the technology for preparing and storing hydrogen with the use of nanostructured materials for an autonomous integrated wind power plant

This paper reports on the results of investigations into the design of an operating prototype of the power plant for the production and accumulation of hydrogen. The objective of this work is to develop technologies of intermediate storage of hydrogen with subsequent generation of an electric power due to the electrochemical processes occurring in fuel cells with an efficiency of no lower than 90%. The power plant is based on the wind power plant, which operates using an integrated software-hardware system for control over the power regime of the entire technological process. New membrane and catalytic materials prepared by the solgel method are used as functional components of fuel cells.     

Antibacterial and antifungal activities of selected microalgae and cyanobacteria

In vitro activity of nine cyanobacterial and ten microalgal newly isolated or culture collection strains against eight significant food‐borne pathogens has been evaluated and compared. Water extracts and culture liquids of Gloeocapsa sp. and Synechocystis sp. demonstrated the widest spectrum of activity with minimal inhibitory concentration (MIC) ranging from 1.56 to 12.5 mg mL^?1. Culture liquid of Anabaena sp. had the highest activity (MIC = 0.39 mg mL^?1) but only to Gram‐positive bacteria. Ethanol extracts and fatty acids from all cyanobacteria and microalgae were active against Streptococcus pyogenes and/or Staphylococcus aureus. The fatty acids of Synechocystis sp. inhibited the growth of Bacillus cereus, Escherichia coli and Candida albicans (MIC values of 2.5–1.25 mg mL^?1, respectively). Exopolysaccharides (EPS) of Gloeocapsa sp. were the sample that exhibited activity against all test pathogens with lowest MIC values (0.125–1 mg mL^?1). High activity with a narrower range of susceptible targets demonstrated the exopolysaccharides of Synechocystis sp. and Rhodella reticulata. Antimicrobial activity was proven for phycobiliproteins isolated from Synechocystis sp., Arthrospira fusiformis, Porphyridium aerugineum and Porphyridium cruentum, respectively. In conclusion Gloeocapsa sp. and Synechocystis sp. and especially their exopolysaccharides showed the most promising potential against the examined food pathogens.     

Involvement of Microglia in the Pathophysiology of Intracranial Aneurysms and Vascular Malformations—A Short Overview

Aneurysms and vascular malformations of the brain represent an important source of intracranial hemorrhage and subsequent mortality and morbidity. We are only beginning to discern the involvement of microglia, the resident immune cell of the central nervous system, in these pathologies and their outcomes. Recent evidence suggests that activated proinflammatory microglia are implicated in the expansion of brain injury following subarachnoid hemorrhage (SAH) in both the acute and chronic phases, being also a main actor in vasospasm, considerably the most severe complication of SAH. On the other hand, anti-inflammatory microglia may be involved in the resolution of cerebral injury and hemorrhage. These immune cells have also been observed in high numbers in brain arteriovenous malformations (bAVM) and cerebral cavernomas (CCM), although their roles in these lesions are currently incompletely ascertained. The following review aims to shed a light on the most significant findings related to microglia and their roles in intracranial aneurysms and vascular malformations, as well as possibly establish the course for future research.