Oxidation of doped europium in BaMgAl10O17 by annealing studied by x‐ray‐absorption fine‐structure measurements

Abstract— We studied the influence of annealing in air on doped europium in BaMgAl₁₀O₁₇ by performing x‐ray absorption fine‐structure measurements. We determined the oxidation of doped divalent europium by annealing in air at over 500°C. The interatomic distance between the europium and the surrounding oxygen atoms was compressed by oxidation. It also appears that the oxidation process of europium is determined by the diffusion of oxygen into BaMgAl₁₀O₁₇.     

A flow simulation for the epoxy casting process using a 3D finite‐element method

A three‐dimensional flow simulation for epoxy casting has been developed. A control‐volume‐based finite‐element method is employed, containing a conservative upwind formulation for the advection terms and equal order interpolations for all variables. This simulation predicts the non‐isothermal and reactive flow behavior under the gravity. The viscosity and reaction‐rate parameters were estimated by using a dynamic rheometer and a differential scanning calorimeter. The predicted flow front advancement and temperature profiles in the calculation domain similar to the mold cavity were in close agreement with the corresponding experimental results. The variation of epoxy surface configuration with flow rate also showed the same tendency between the prediction and the experiment. This simulation seems to be applicable not only to the epoxy casting, but also to other molding processes of various thermoset resins. POLYM. ENG. SCI. 45:364–374, 2005. © 2005 Society of Plastics Engineers.     

Novel hepatitis C virus protease inhibitors: thiazolidine derivatives

This study evaluated the inhibitory effects of thiazolidine derivatives on hepatitis C virus (HCV) protease and other human serine proteases. The inhibition efficacy was tested with a reversed-phase high-performance liquid chromatography (HPLC) assay system using a NS3-NS4A fusion protein as the HCV protease and a synthetic peptide substrate that mimics the NS5A-5B junction. Nine thiazolidine derivatives showed more than 50% inhibition at 50 microg/ml. The most potent derivative was RD4-6250, with 50% inhibition at a concentration of 2.3 microg/ml; this concentration was lower than those of other protease inhibitors reported previously. The most selective derivative was RD4-6205, with 50% inhibition at a concentration of 6.4 microg/ml, a lower concentration than those on other serine proteases (chymotrypsin, trypsin, plasmin, and elastase). These results suggest that the RD4-6205 skeleton is an important structure for inhibitory activity on the HCV protease NS3-NS4A.     

Successful surgical repair for a patient with atrial septal defect and severe pulmonary hypertension--its surgical indication and prostaglandin E1 use for postoperative pulmonary hypertensive crisis

A 45-year-old woman with atrial septal defect and pulmonary hypertension was admitted for surgical repair. Cardiac catheterization data revealed pulmonary to systemic flow ratio (Qp/Qs) of 1.81, pulmonary artery pressure (PAP) of 82/30 mmHg and pulmonary vascular resistance (PVR) of 10.8 unit. Open lung biopsy was added to evaluate pulmonary vascular obstructive disease (PVOD) which was shown Heath-Edwards grade 3 PVOD. Following closure of the defect, PAP (systolic) exceeded momentarily systemic level after cardiopulmonary bypass. Prostaglandin E1 drip was remarkably effective to bring down PAP during early postoperative period. Although PAP has not been shown significant decrease on catheterization of one year after surgery, great symptomatic improvement has been achieved.     

Exchangeability of actin in cardiac myocytes and fibroblasts as determined by fluorescence photobleaching recovery

OBJECTIVE: To assess whether hypertension is a risk factor for hysterectomy performed for benign diseases. METHODS: Self-report questionnaires were collected from 77% of 2301 Danish women aged 30, 40, 50, or 60 years selected at random in 1982 for a prevalence study. Information about cardiovascular diseases, hypertension, use of medicine, weight and dieting history, life-styles, psychologic factors, gynecologic history (including history of hysterectomy), and social background were recorded. Weight, height, and blood pressure were measured. In an incidence study, the cohort was followed during 1982-1990 via central registers to assess the incidence of hysterectomy. Logistic and Cox regressions were used to analyze data. RESULTS: In the prevalence study, history of hypertension partly explained the relation between hysterectomy and cardiovascular diseases. In the incidence study, history of hypertension and use of diuretics were significant risk factors for hysterectomy. After confounder control, use of diuretics was explained by weight-related variables, and hypertension was a risk factor for hysterectomy in educated women (adjusted relative risk [RR] 2.88, 95% confidence interval [CI] 1.07, 7.76) and in women with weight fluctuations (adjusted RR 3.31, 95% CI 1.35, 8.14). Weight cycling and lack of education remained significant risk factors for hysterectomy in women with and without hypertension, respectively. CONCLUSION: History of hypertension, weight cycling, and lack of education are closely related risk factors for premenopausal hysterectomy. These three risk factors contribute to women undergoing hysterectomy having an increased risk for cardiovascular diseases. We proposed that hypertension might be a plausible biological cause of menorrhagia and an indication for hysterectomy.     

Two geometrical isomers of linoleic acid: Improved total syntheses

The total syntheses of 9(Z),12(E)- and 9(E),12(Z)-octadecadienoic acids have been carried out. A useful intermediate in both syntheses, 8-bromo-octanoic acid, recently has become available from commercial sources. This compound has been used to expedite the preparation of these isomers. The remaining carbon atoms were derived from propargyl alcohol along with either 1-heptyne or acetylene and 1-bromopentane. Because the overall yield for each sequence was roughly 15% and there were no extraordinary reaction conditions in any of the synthetic steps, the compounds could be prepared readily in multiple gram quantities. The syntheses of the two compounds were supported by data from a variety of spectroscopic techniques.     

Distribution of higher-order structures in injection-molded polypropylenes

Flexural test specimens were injection-molded from six homoisotactic polypropylenes with MFI = 0.49-25.1 dg/min under cylinder temperatures of 200-320°C. Distributions in the flow direction of higher-order structures such as crystallinity X_c, thickness of skin layer, a*-axis-oriented component fraction [A*], and crystalline orientation functions and distributions in the thickness direction of higher-order structures such as X_c, β-crystal contents, [A*], and crystalline orientation functions were studied. These higher-order structures are inhomogeneous in the flow and thickness directions, which strongly influences the product properties such as mechanical and thermal properties. Molecular orientation process in injection molding was theoretically analyzed from a viewpoint of growth of recoverable shear strain at the gate and its relaxation in the cavity, which could considerably well explain the variations in the flow and thickness directions of the quantities such as thickness of the skin layer and crystalline orientation functions which express the degree of molecular orientation.     

Continuous formation of slurry ice by cooling water–oil emulsion in a tube

Water-silicone oil emulsion with an additive, (C₂H₅O)₃SiC₃H₆NH₂, was examined as a heat storage material. A spiral tube used as a heat exchanger was immersed in a low temperature bath and the emulsion was circulated in the tube to make ice continuously. Ice was separated from the ice–liquid suspension in an outlet tank. The amount of formed ice, the temperatures of the inlet and the outlet of the heat exchanger, and the temperatures in the tube wall were measured and the overall heat transfer coefficient and the heat flux through the tube were calculated. Experiments were carried out, varying the flow rate, the temperature of cooling brine, and the thickness of tube wall. The condition under which slurry ice was formed continuously without adhesion of ice to the cooling wall was clarified. Though decrease in the thermal resistance of the tube increased the rate of ice formation or raised the brine temperature, it narrowed the range of the flow rate and of the brine temperature in which slurry ice was formed continuously.