10 Gbit/s optical BPSK homodyne detection experiment with solitaryDFB laser diodes

Solitary DFB laser diodes with 174 kHz beat linewidth are applied to a 10 Gbit/s optical BPSK homodyne detection system for the first time: a sensitivity of -38.9 dBm was achieved. A three-electrode laser forms the local oscillator and is modulated with a partial push-pull scheme to improve its frequency response     

Heavy oil sorption and recovery by using carbon fiber felts

On fibrous carbon materials, including activated carbon fibers, sorption capacity for heavy oils, less viscous A-grade and more viscous C-grade, was determined. Sorption capacity depended strongly on their bulk density; the correlation was the same as that found previously on exfoliated graphite and carbonized fir fibers. On carbon fiber felts, excellent recycling performance was observed, though sorption capacity was not so high as on exfoliated graphite and carbonized fir fibers. By filtration under suction, about 90% of sorbed A-grade heavy oil could be recovered and no decrease in sorption capacity was detected even after eight cycles. By washing with solvents, n-hexane for A- and C-grade oils and A-grade oil for C-grade oil, almost 100% recovery with no marked reduction in sorption capacity was found for each cycle. For the felts of PAN-based carbon fibers, rather severe operations for oil recovery, centrifugation and squeezing with twisting, could be applied without pronounced decreases in sorption capacity and recovery ratio.     

Preparation of Aragonite Whiskers

A simple synthetic method for preparing aragonite whiskers has been developed. A suspension of CaCl₂-MgCl₂-Mg(OH)₂ with pH ∼9 has been prepared by adding Ca(OH)₂ to MgCl₂ aqueous solution. CaCO₃ whiskers (aragonite phase) have been prepared easily by blowing CO₂-containing gas into the suspension. The whiskers have high aspect ratios ranging from 20 to 80 with diameters of 0.5–1 μm .     

Two‐way multi‐view 2‐D/3‐D display combining LC lens and HVxDP panel using novel pixel arrangement

We have developed a two‐way multi‐view 2‐D/3‐D display combining a liquid crystal lens and horizontally and vertically x times‐density pixels (HVxDP) arrangement. The two‐way multi‐view display features the same display resolution in 2‐D and 3‐D modes and a quite small color moiré for landscape and portrait, respectively, when using the HVxDP arrangement. In this paper, we realized suitable 3‐D properties for achieving a good balance between 3‐D moiré and 3‐D crosstalk for landscape and portrait by a two‐way liquid crystal lens with two kinds of focal lengths for the edge part and the center part of the lens.     

Development of fault cause estimation method for distribution line

We are planning to develop the new Advanced Distribution Automation System (ADAS) equipped with optical communication network and sectionalizer with sensor for more grid reliability and efficiency on maintenance operation. The new system is featured with the function of fault cause or damaged part estimation. The new sectionalizer captures the waveform of electrical line surge originated by fault and the system analyzes the waveform for this function. This paper mainly introduces the system configuration of ADAS and an early stage examination of fault cause estimation technology.     

Preconditioned iterative solver on the coarsest level of a multi-grid method for high frequency time harmonic electromagnetic field analyses

A multi-grid method is one of the most powerful linear solvers for finite element electromagnetic field analysis. However, as the discretized model has recently been enlarged, a solution process for a linear system arising on the coarsest level tends to be problematic in a complete multi-grid solution process. Whereas a linear system on the coarsest level is generally solved by a direct solver, we solve it here by means of an iterative solver to reduce the memory requirements. Since a conventional preconditioning technique is not effective for such a linear system, we introduce preconditioning techniques based on Arnold, Falk, and Winther’s and on Hiptmair’s smoothers. Numerical tests show that the newly installed preconditioning technique greatly improves the convergence rate.     

Speciation of selenium in selenium-enriched seeds,buckwheat (<Emphasis Type="Italic">Fagopyrum esculentum</Emphasis> Moench) and quinoa (<Emphasis Type="Italic">Chenopodium quinoa</Emphasis> Willdenow)

Buckwheat (Fagopyrum esculentum Moench) and quinoa (Chenopodium quinoa Willdenow) are widely used as food ingredients. The nutritional characteristics of these plants, i.e., high contents of proteins and amino acids suggest that selenium (Se) is preserved as selenoamino acid derivatives, in particular, selenomethionine (SeMet) in proteins, similar to selenized yeast. Therefore, buckwheat and quinoa are expected to be a good nutritional source of Se. Selenized buckwheat and quinoa were cultivated on Se-fortified soil using sparingly soluble Se salts, such as barium selenate and barium selenite. Se concentration in the edible parts of these plants was determined, and Se extraction efficiency with enzyme or alkali was evaluated. In addition, the chemical species of Se in the low molecular weight fraction of these plants were determined by HPLC-ICP-MS. Total Se concentrations in the edible parts of selenized buckwheat and quinoa were 170.4 ± 2.9 μg/g and 102.7 ± 2.4 μg/g wet weight, respectively. Thus, these selenized seeds were found to be Se accumulators. The results indicate that Se in selenized buckwheat exists mainly as SeMet, while Se in selenized quinoa exists not only as SeMet but also as selenate (Se(VI)) and non-protein forms.     

Success rates in a multimodal command language for home robot users

This article considers the success rates in a multimodal command language for home robot users. In the command language, the user specifies action types and action parameter values to direct robots in multiple modes such as speech, touch, and gesture. The success rates of commands in the language can be estimated by user evaluations in several ways. This article presents some user evaluation methods, as well as results from recent studies on command success rates. The results show that the language enables users without much training to command home robots at success rates as high as 88%–100%. It is also shown that multimodal commands combining speech and button-press actions included fewer words and were significantly more successful than single-modal spoken commands.     

W-band waveguide photomixer using a uni-traveling-carrier photodiode with 2-mW output

Developed a W-band (75-110 GHz) waveguide photomixer with a uni-traveling carrier photodiode, which can be driven by two 1.5-/spl mu/m lasers. It generates an output power of 2.2/spl plusmn/0.2 mW at 100 GHz with a laser power of less than 100 mW, and its relative power variation is as small as 3 dB across the entire frequency range of the W-band. A 100-GHz superconductor-insulator-superconductor receiver driven by this photomixer shows the same noise temperature around 26 K as that driven by a conventional Gunn oscillator.