Current advances concerning the most cited metal ions doped bioceramics and silicate-based bioactive glasses for bone tissue engineering

Studies related to biomaterials that stimulate the repair of living tissue have increased considerably, improving the quality of many people's lives that require surgery due to traumatic accidents, bone diseases, bone defects, and reconstructions. Among these biomaterials, bioceramics and bioactive glasses (BGs) have proved to be suitable for coating materials, cement, scaffolds, and nanoparticles, once they present good biocompatibility and degradability, able to generate osteoconduction on the surrounding tissue. However, the role of biomaterials in hard tissue engineering is not restricted to a structural replacement or for guiding tissue regeneration. Nowadays, it is expected that biomaterials develop a multifunctional role when implanted, orchestrating the process of tissue regeneration and providing to the body the capacity to heal itself. In this way, the incorporation of specific metal ions in bioceramics and BGs structure, including magnesium, silver, strontium, lithium, copper, iron, zinc, cobalt, and manganese are currently receiving enhanced interest as biomaterials for biomedical applications. When an ion is incorporated into the bioceramic structure, a new category of material is created, which has several unique properties that overcome the disadvantages of primitive material and favors its use in different biomedical applications. The doping can enhance handling properties, angiogenic and osteogenic performance, and antimicrobial activity. Therefore, this review aims to summarize the effect of selected metal ion dopants into bioceramics and silicate-based BGs in bone tissue engineering. Furthermore, new applications for doped bioceramics and BGs are highlighted, including cancer treatment and drug delivery.     

Synthesis of model latices for the study of coalescence mechanisms

This work describes the synthesis of model latices devoted to the study of the influence of particle-water and particle-air interfacial energies on coalescence mechanisms. Core-shell particles with the same diameter (? 2600 Å) and narrow size distributions were prepared. The core is a poly(styrene-co-butyl acrylate) (60/40 wt %) copolymer; it represents 90% of the volume of the particle. The shell is a poly(St-BuA-methacrylic acid) terpolymer with 10, 15, or 25 wt % MAA. The St-BuA weight ratio in the shell is also 60/40. The amount of MAA in the shell determines the particle-water or air interfacial energies. In order to limit the use of an emulsifier and to ensure a homogeneous particle surface layer, an inverted core-shell synthesis was performed. The hydrophilic shell was prepared first and used as a seed for the synthesis of the hydrophobic core. For all three core-shell latices, about 45% of the introduced MAA was found at the surface of the particles, which indicates that the core-shell inversion was successful. The synthesis of the latices with 10 or 15 wt % MAA was relatively easy, whereas the particle size was difficult to control in the 25 wt % MAA latex synthesis.     

Fast intra prediction algorithm based on texture analysis for 3D-HEVC encoders

The advances in display technologies and the growing popularity of 3D video systems have attracted more consumers for 3D viewing experiences, and, consequently, the demand for storage and transmission of 3D video content is increasing. To cope with this demand, a 3D video extension of high-efficiency video coding (HEVC) standard is being developed and near the final standardization stage. The upcoming 3D-HEVC standard is expected to provide higher encoding efficiency than its predecessors, supporting multiple views with high resolution, at a cost of considerable increase in computational complexity, which can be an obstacle to its use in real-time applications. This article proposes a novel complexity reduction algorithm developed to optimize the 3D-HEVC intra mode decision targeting real-time video processing for consumer devices with limited computational power, such as 3D camcorders and smartphones equipped with multiple cameras and depth acquisition capabilities. The proposed algorithm analyzes the texture frames and depth maps to estimate the orientation of edges present in the prediction unit data, speeding up the intra prediction process and reducing the 3D-HEVC encoding processing time. Experimental results demonstrate that the proposed algorithm can save 26 % in computational complexity on average with negligible loss of encoding efficiency. This solution contributes to make more feasible the compression of 3D videos targeting real-time applications in power-constrained devices.     

The effect of co-encapsulation of Lactobacillus rhamnosus GG ATCC 53103 with inulin on alginate/chitosan matrix: the viability in fermented soy blend and simulated digestive system

This research verified the ability of Lactobacillus rhamnosus encapsulated with inulin to tolerate the simulated digestive system and their viability in a soy blend. Probiotic encapsulated in alginate-chitosan matrix without inulin presented a better encapsulation efficiency (80.92%) than encapsulation with inulin (57.39%). On the 28th day, the count of probiotics decreased by 3.42 and 1.99 logarithmic cycles of free and encapsulated cells without inulin, respectively. In contrast, the microorganisms encapsulated with inulin showed an increase of 1.26 logs CFU g⁻¹. During gastrointestinal simulation, cell counts decreased by 0.78, 1.55 and 1.95 CFU g⁻¹ logs for encapsulated cells without inulin, free and encapsulated with inulin, respectively. Sensory panellists liked the fermented soy blend with encapsulated lactobacilli, and this result shows the possibility to create new probiotic foods of plant origin. Therefore, the alginate/chitosan matrix can be considered adequate for the encapsulation of L. rhamnosus. The inulin reduces the encapsulation efficiency and increases the cell loss in gastrointestinal simulation. Considering cellular losses, the best option for preparing a fermented soy blend is to use L. rhamnosus encapsulated without inulin.     

Liquid chromatographic determination of caffeine and adrenergic stimulants in food supplements sold in Brazilian e-commerce for weight loss and physical fitness

Methyl-xanthines and adrenergic stimulants, such as caffeine and synephrine, are commonly added to food supplements due to their stimulating and thermogenic effects. In addition, the abusive consumption of food supplements with ergogenic and aesthetic purposes has been observed worldwide. This work describes the study of caffeine, p-synephrine, hordenine, octopamine, tyramine, ephedrine and salicin as stimulants in dietary supplements marketed in Brazil for weight loss and physical fitness claims. A total of 94 different products were acquired from 30 Brazilian websites. Thus, the sampling of marketed supplements was performed in virtual commerce (e-commerce) with claims of weight loss, appetite reduction, fat burning and metabolism acceleration. The developed analytical method involved the separation of the stimulants by HPLC with diode array detection (HPLC-DAD) by using a gradient elution of flow rate (0.7–2.5 ml min^?1) and mobile phase composition (0.1% H₃PO₄/methanol). The validated method was applied to the study of 46 dietary supplements. Caffeine, p-synephrine and ephedrine were found to be present as stimulants in 52% of the studied samples marketed as encapsulated or bulk forms. Caffeine was found to be present in concentrations that represent doses from 25.0 to 1476.7 mg day^–1. Synephrine was found in concentrations that represent doses from 59.1 to 127.0 mg day^–1. Ephedrine was found to be associated with caffeine in one formulation at a concentration representing a 26.1 mg day^–1 dosage.     

Preparation and morphological characterization of two- and three-component natural rubber-based latex particles

Different emulsion polymerization processes allowed variation in the microstructure of composite natural rubber (NR)-based latex particles. A prevulcanized and a not-crosslinked natural rubber latex were coated with a shell of crosslinked poly(methyl methacrylate) (PMMA) or polystyrene (PS). The bipolar redox initiating system tert-butyl hydroperoxide/tetraethylene pentamine promoted a core–shell arrangement. Furthermore, PS subinclusions were introduced into the NR core. The initiators used for the subinclusion synthesis were azobisisobutyronitrile at high temperature and a redox initiation system consisting of tert-butyl hydroperoxide/dimethylaniline at low temperature. The morphology of the resulting latex interpenetrating networks (IPN) was characterized by transmission electron micros-copy (TEM) and scanning electron microscopy (SEM). Different staining methods allowed us to increase the contrast between the NR phase and the secondary polymers in the composite latex particles. A semicontinuous feeding process decreased the PS subinclusions size by a factor of 6 in comparison with a batch reaction. Depending on the NR/styrene swelling ratio, the crosslinking degree, and the polymerization temperature used, distinct differences of the phase arrangement of polymers in the latex particles were revealed. © 1996 John Wiley & Sons, Inc.     

Challenges and opportunities for productivity improvement studies in linear,repetitive, and location-based scheduling

Despite theoretical advancements in alternative project planning methods the extent of their practical implementation varies strongly; it has been limited especially in the US construction industry. The family of linear, repetitive, and location-based scheduling techniques holds significant but barely substantiated promise by containing multiple variables of interest for integrated analysis and optimization. Yet it is necessary to provide empirical evidence that using such techniques can improve productivity to increase credibility and acceptance by practitioners, because claims of conceptual superiority are only sporadically supported with detailed measures. An analysis is performed to identify relevant decision-making variables, extract challenges that currently limit the corpus of quantitative productivity studies on alternative scheduling to its insufficient size, and reveal opportunities to expand it in breadth and depth. Variables are categorized by their relevance to time, activity, resource and location, as well as the managerial approach. Challenges include the diverse definitions of productivity itself, issues related to achieving generalizability, and the detailed steps of data collection, preparation, and analysis. Opportunities include the guidance from existing but rare studies and well-established research methods such as case studies that can be applied. This is illustrated with a sample project of a high-rise apartment building in Brazil. If alternative methods can be proven to be measurably better for specific applications, there might be a paradigm shift from merely defaulting to traditional but problematic network-based scheduling toward consciously choosing the planning method based on its potential benefits for a project.     

Dimensional aspects of aerosol deposition on cylinders with rebound

Net deposition efficiency of particles on infinite cylinders is shown to be a unique function of the Stokes number and a new dimensionless parameter, the Critical Stokes number. This number is formed with the use of the critical rebound speed. Dimensional analysis and numerical methods can be used to establish the relationship between the net deposition efficiency and the Stokes numbers, and some empirical evidence supports the relationship.