Formation of Zinc–Antimony-Based Spinel Phases

Formation of spinel phases in ZnO–Sb₂O₃and ZnO–Sb₂O₃–Bi₂O₃systems is studied by the use of X-ray diffraction. The formation of nonstoichiometric Zn_2.33Sb_0.67O₄phase is observed in both the systems at ∼900°C. However, in these systems, at higher temperatures ( T ≥ 1100°C), formation of the inverse spinel phase Zn₇Sb₂O₁₂is observed. The study has been extended to understand the effect of CrO₃doping on the stability of the different spinel phases in the previously mentioned systems. Interestingly, in both the systems, samples doped with CrO₃, displayed the presence of Zn_2.33Sb_0.67O₄phase <1200°C, indicating the stabilization of the spinel phase by CrO₃.     

Kinematic Design and Analysis of a 7 Degree-of-Freedom Dual-Stage Inspection Manipulator for Dexterous Subsea Applications

This paper describes the design of a 7 degree-of-freedom (d.o.f) manipulator for underwater inspection applications. The functional requirements of an underwater manipulator for subsea inspection are discussed and the desired performance requirements identified. The inspection process of a weld joint using a manipulator is described and the desirable attributes of a 5 d.o.f manipulator for the inspection process established. A novel kinematic structure, for Underwater Robotic Vehicle (URV) operation, having a 2 d.o.f launching stages and a 5 d.o.f inspection stage is proposed for the manipulator. This configuration increases the dexterity, without compromising on the total reach of the manipulator. The kinematic structure of the 7 d.o.f, 2 stage, manipulator is presented. A hybrid power actuation is proposed for the manipulator to exploit the benefits of both hydraulic as well as electric actuators. Kinematic analysis of the manipulator is presented. The link dimensions of the inspection stage manipulator is done on the basis of kinematic performance indices of the manipulator. The novel kinematic structure and the hybrid power actuation strategy results in a power efficient, dexterous manipulator for underwater applications.     

Stochastic inverse heat conduction using a spectral approach

An adjoint‐based functional optimization technique in conjunction with the spectral stochastic finite element method is proposed for the solution of an inverse heat conduction problem in the presence of uncertainties in material data, process conditions and measurement noise. The ill‐posed stochastic inverse problem is restated as a conditionally well‐posed L₂ optimization problem. The gradient of the objective function is obtained in a distributional sense by defining an appropriate stochastic adjoint field. The L₂ optimization problem is solved using a conjugate‐gradient approach. Accuracy and effectiveness of the proposed approach is appraised with the solution of several stochastic inverse heat conduction problems. Copyright © 2004 John Wiley & Sons, Ltd.     

Nonlinear radiation on Maxwell fluid in a convective heat transfer with viscous dissipation and activation energy

The present analysis addresses linear and nonlinear radiation effects in hydrodynamic viscous Maxwell fluid flow on a unidirectional stretching surface through viscous dissipation. The relaxation effect is considered in the mathematical model, which elucidates mass transport mechanisms under binary chemical reaction and activation energy. Mathematical modeling contains nonlinear partial differential equations using boundary conditions. Appropriate transformations convert the partial differential equations into ordinary differential equations. Numerical solutions for regular differential equations are brought by Runge–Kutta–Fehlberg numerical quadrature and a shooting method with a tolerance level of 10⁻⁹. The influence of physical variables, such as Deborah relaxation number, rotation parameter, Biot number, activation energy parameter, reaction rate parameter, Eckert number, and Prandtl number are investigated. Increasing the Biot number improves the temperature region in the boundary layer. With high rotation, the increasing Deborah number enhances the fluid temperature substantially throughout the boundary layer.     

The Potential Roles of Dec1 and Dec2 in Periodontal Inflammation

Periodontal inflammation is a common inflammatory disease associated with chronic inflammation that can ultimately lead to alveolar attachment loss and bone destruction. Understanding autophagy and pyroptosis has suggested their significant roles in inflammation. In recent years, studies of differentiated embryo-chondrocyte expressed genes 1 and 2 (Dec1 and Dec2) have shown that they play important functions in autophagy and in pyroptosis, which contribute to the onset of periodontal inflammation. In this review, we summarize recent studies on the roles of clock genes, including Dec1 and Dec2, that are related to periodontal inflammation and other diseases.     

Experimental and CFD Heat Transfer Studies of Al2Oa-Water Nanofluid in a Coiled Agitated Vessel Equipped with Propeller

This paper presents the heat transfer characteristics of A1203-water nanofluid in a coiled agitated vessel with propeller agitator. The experimental study was conducted using 0.10%, 0.20% and 0.30% volume concentra tion of A1203-water nanofluids. The results showed considerable enhancement of convective heat transfer using the nanofluids. The empirical correlations developed for Nusselt number in terms of Reynolds number, Prandtl number, viscosity ratio and volume concentration fit with the experimental data within ±10%. The heat transfer characteris tics were also simulated using computational fluid dynamics using FLUENT software with the standard ke model and multiple reference frame were adopted. The computational fluid dynamics （CFD） predicted Nusselt number agrees well with the experimental value and the discrepancy is found to be less than ＋8%.     

Optical and electrical properties and phonon drag effect in low temperature TEP measurements of AgSbSe2 thin films

Polycrystalline thin films of silver antimony selenide have been deposited using a reactive evaporation technique onto an ultrasonically cleaned glass substrate at a vacuum of 10-5 torr. The preparative parameters, like substrate temperature and incident fluxes, have been properly controlled in order to get stoichiometric, good quality and reproducible thin film samples. The samples are characterized by XRD, SEM, AFM and a UV-vis-NIR spectrophotometer. The prepared sample is found to be polycrystalline in nature. From the XRD pattern, the average particle size and lattice constant are calculated. The dislocation density, strain and number of crystallites per unit area are evaluated using the average particle size. The dependence of the electrical conductivity on the temperature has also been studied and the prepared AgSbSe2 samples are semiconducting in nature. The AgSbSe2 thin films exhibited an indirect allowed optical transition with a band gap of 0.64 eV. The compound exhibits promising thermoelectric properties, a large Seebeck coefficient of 30 mV/K at 48 K due to strong phonon electron interaction. It shows a strong temperature dependence on thermoelectric properties, including the inversion of a dominant carrier type from p to n over a low temperature range 9-300 K, which is explained on the basis of a phonon drag effect.     

Magnetic Behaviour of Granular GdMnO<Subscript>3</Subscript> Film

The present study deals with the investigation of magnetic properties along with morphological and microstructure analyses of a multiferroic GdMnO₃ film fabricated on Si(100) substrate by the pulsed laser deposition technique. Rutherford backscattering spectroscopic analysis suggests that the film is fabricated in the form of diffused layers having different stoichiometric proportions. Raman spectroscopy signifies that few modes present in the film are associated with MnO₆ octahedra and some extra peaks indicating the mixed phase formation in tuning with the Rutherford backscattering spectroscopy. Atomic force microscopy confirms the granular nature of the film. Field-cooled and zero-field-cooled thermal magnetization curves show irreversible behaviour extending well above room temperature, which is associated with spin disorder. The presence of Gd⁺³ state and Mn⁺³/Mn⁺⁴ mixed states in the uppermost layers of the film was confirmed by near-edge X-ray absorption fine structure. Subsequently, in association with these observations, the film is a weak ferromagnetic at 5 K and even at room temperature.     

Effect of composition on steady state and transient photoconductivity in isocoordinated In<Subscript>x</Subscript>Sb<Subscript>30−x</Subscript>Se<Subscript>70</Subscript> (0 ≤ x ≤ 25) chalcogenide films

The study of steady state and transient photocurrent measurement provide important information about carrier generation and recombination phenomena in various semiconducting systems for photo-sensor device applications. In the present work, the composition dependent analysis of photocurrents was studied for thermally evaporated Se-rich In_xSb_30?xSe₇₀ films of average thickness 800 nm. The indirect optical gap has been calculated from the transmission and reflection data and the variation of molecular units was studied from the Raman spectroscopy. The initial rise of photocurrent sharply to approach a steady state value during illumination and fast decay to a constant persistent current after stopping the illumination has been observed. The intensity dependence of photocurrent obeys the power law I_Ph?=?F^γ, where the value of exponent tells about the recombination process. The decay of photocurrent has been fitted with stretched exponential function for different compositions and at different light intensities. These results are important for the development of low cost photo absorbers for solar cell applications and visible region responsive photo sensor devices.