Simulation of cup-cone fracture using the cohesive model

The cohesive model is used for the prediction of the crack path during stable crack extension in ductile materials. The problem of crack-path deviation is investigated by means of simulation of crack propagation in a round tensile bar. The respective phenomenon is known as cup-cone fracture. It is shown that the model is able to predict the failure mechanism, which consists of normal fracture in the center and combined normal/shear fracture in the so-called “shear lips” at the specimen’s rim. The damage evolution and crack path predicted by the model are presented. The effect of the normal and shear failure parameters on the crack-deflection point and several aspects of the finite element mesh are discussed.     

Fracture toughness evaluation by tensile and charpy-type tests based on micromechanical models of materials

With the aim of applying micromechanical approaches to fracture mechanics, we carried out dynamic tensile tests and instrumented impact tests with Charpy-type specimens both with a V-shaped notch and with a crack. We compared two micromechanical strain-rate-dependent models based on a modified Gurson flow function by simulating various dynamically loaded specimens. The results of the tests indicate that the critical void volume fractionf _c and the characteristic lengthl _c are practically independent of the strain rate and the geometry of the specimen. The behavior of the specimens subjected to strains and fracture can be characterized by the parameters determined in tensile tests and impact tests with the Charpy-type specimens. By the three-dimensional analysis based on the strain-rate-dependent Gurson model, we predict the onset of crack growth inside the Charpy specimen.Fraunhofer Institut für Werkstoffmechanic, Freiburg, Deutschland. Published in Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 30, No. 2, pp. 77–84, March–April, 1994.     

Residual strength prediction of a complex structure using crack extension analyses

The residual strength of a flat panel (thickness 7.6 mm) with five stringers, machined from a monolithic block of Al2024-T351 material, which contained a crack that divided the central stringer, was to be predicted during a Round Robin organised by ASTM. The initial crack tips were right ahead of the stringers #2 and #4, respectively, so that crack branching along the skin and into the stringers occurred after initiation. The prediction has been achieved using finite element simulations including crack extension, for which a cohesive model was utilised. Conventional material properties, yield and ultimate strength as well as experimental results from M(T) specimens in terms of force, COD and Δa, were given. The residual strength prediction was performed in two-steps: First the crack extension parameters for the cohesive model, the cohesive strength, T₀, and the cohesive energy, Γ₀, were determined by numerical reproduction of the results of the M(T) specimen. With the optimised parameters, the five-stringer panel was modelled. These steps were conducted by two different finite element models: by a shell and a 3D finite element mesh. It turned out that it is possible to analyse the structure with both models. In the 3D case, the residual strength prediction was conservative and the deviation of the predicted from the experimental value was below 9%. The results of the shell simulation were even closer to the experiment (deviation approximately 3%), but the simulation was non-conservative.     

COLLATE – A collaboratory supporting research on historic European films

In the COLLATE project, we aim to design and implement a Web-based collaboratory for archives, scientists, and end users working with digitized cultural material. Our example domain is the historic film documentation comprising digitized material about European films of the early 20th century. Designed as a content- and context-based knowledge working environment for distributed user groups, the COLLATE system supports both individual work and collaboration of domain experts who are analyzing, evaluating, indexing, and annotating material in the data repository. The system provides appropriate task-based interfaces for indexing and annotating. As a multifunctional means of in-depth analysis, annotations can be made individually but also collaboratively, for example in the form of annotation of annotations. Combining results from manual and automatic indexing procedures, elaborate content- and context-based information retrieval mechanisms can be applied.     

An FE-analysis of anisotropic creep damage and deformation in the single crystal SRR99 under multiaxial loads

Multidimensional stress–strain and damage analyses of engineering structural components with the help of numerical simulations are of great interest. These can only be done by using adequate material models and suitable numerical methods. Bertram and Olschewski (Computational modelling of anisotropic materials under creep conditions, Math. Modelling Sci. Comp. 5 (1995) 100–109; Anisotropic creep modeling of the single crystal superalloy SRR99, J. Comp. Mater. Sci. 5 (1996) 12–16), proposed a three-dimensional creep model for single crystals. An anisotropic creep damage model for single crystals was also suggested by Qi and Bertram (W. Qi, A. Bertram, Anisotropic creep damage modeling of single crystal superalloys, Tech. Mech. 17 (1997) 313–322; W. Qi, Modellierung der Kriechschadigung einkristalliner Superlegierungen in Hochtemperaturbereich, Ph.D. dissertation, Technical University Berlin, VDI Verlag, Düsseldorf, 1998; W. Qi, A. Bertram, Damage modeling of the single crystal superalloy SRR99 under monotonous creep, Comput. Mater. Sci. 13 (1998) 132–141). The coupled model has been used to predict the creep deformation and the lifetime of the single crystal SRR99 under uniaxial creep loads at 760°C. The purpose of this work is the application of the coupled model to the simulation of multiaxial creep behavior and damage development, and its dependence upon non-proportional loading paths of SRR99 at 760°C.     

纺织印花机的色彩管理及在线通讯

本文描述了用于公司内部以及供货商与消费者之间的色彩管理和交流的方法，以及那些已经应用了一段时间的方法。同时就纺织品喷墨印花技术作了相关的讨论，这种技术要求印花专家具有全新的思维模式。     

True trisomy 15 mosaicism, detected by amniocentesis at 12 weeks of gestation and fetal echocardiography

A case of mosaicism of trisomy 15, with two-thirds of the cells trisomic, was detected at 12 weeks of gestation in amniotic fluid cell cultures obtained with the filtration technique. Ultrasound examination at 13 weeks showed a nodule protruding into the amniotic cavity which was speculated to be remnants of a co-twin, causing the trisomic cell line. At 20 weeks of gestation, a malformation scan (level III) was normal, but supplementary fetal echocardiography revealed a severe cardiac defect (mitral atresia and a ventricular septal defect). Fetal lymphocytes obtained by cordocentesis showed trisomy 15 mosaicism, but only in 5 per cent of the mitoses. After termination, the same percentage of trisomy 15 mosaicism was found in cells from skin and tendon as in the original early amniocentesis. No sign of earlier twinning was found in the placenta or membranes. We conclude that mosaicism in early amniotic fluid obtained by the filter technique in this case reflected the true karyotype accurately and that supplementary echocardiography added significantly to the interpretation of the clinical implications.     

Distinctive roles of oleate and glucagen in gluconeogenesis

Osteogenesis in the penial bone was observed in male rat: immature stromal cells of mesenchymal origin appeared in the penis on the 21st day of fetal age and developed to form mature bony structure with the bonemarrow on or before day 7 after birth; the bone was 1.41 +/- 0.12 mm in length. Neonatal castration caused maldevelopment of the penial bone, while prepuberal treatment with testosterone propionate stimulated the bony growth in castrated immature rat. These results suggest that the stromal cells in penile part of newborn male rats have already been destinated to develop into os penis by fetal exposure to androgen and they do not require androgens for further differentiation but for the bony growth after birth.     

THE ETM METHOD FOR ASSESSING THE SIGNIFICANCE OF CRACK-LIKE DEFECTS IN ENGINEERING STRUCTURES

The Engineering Flaw Assessment Method, EFAM, is presently being developed at GKSS. It consists of several individual documents for determining material properties and the crack driving force. The present paper briefly describes the document EFAM ETM 97 which provides guidance for estimating the crack tip opening displacement (CTOD) and the J-integral as driving force parameters for homogeneous structures. The CTOD and J can be expressed as functions of applied force or applied strain.