Biocides used in building materials and their leaching behavior to sewer systems.

There is increasing concern about diffuse pollution of aquatic systems by biocides used in urban areas. We investigated sources and pathways of biocides significant for the pollution of storm water runoff. Main sources seem to be building envelopes, i.e. facades (paints, plasters) and roof sealing membranes. First results from a defined urban catchment drained by a separated sewer system without any agricultural activities reveal a substantial occurrence. Even after the first flush, concentrations of terbutryn, carbendazim, mecoprop as well as Irgarol 1051 and its metabolite exceeded the Swiss water quality standard of 0.1 microg/L. In laboratory experiments, leaching of mecoprop used as a root protection agent in bitumen sheets for roof waterproofing was determined. The concentrations differed in 16 different sheets two orders of magnitude, depending on the product composition. Using optimized products, it is expected to be the most efficient and sustainable way to reduce the environmental impact. To understand transport dynamics and environmental risk, further storm water events will be analyzed. Based on the ongoing project URBIC, first measures will be proposed to limit the release to surface and ground water.     

Variations in fundamental frequency peak position in Japanese macaque (Macaca fuscata) coo calls.

Japanese macaques (Macaca fuscata) produce coo calls whose use in various contexts is correlated with differences in the relative temporal position of the peak value of a call's fundamental frequency (S. Green, 1975). Studies have produced conflicting results about both the location of the category boundary between smooth early high and smooth late high coo subtypes and macaques' perceptual sensitivity to variations in peak position. In this study, fundamental frequency peak positions were measured in 578 coos produced by 8 captive adult female Japanese macaques in order to test whether calls with peak positions close to either of 2 hypothesized boundaries occurred at low rates. Overall, such calls were found to occur at rates equal to or higher than predicted by chance. Peak position varied more consistently between animals than by behavioral context. The results may indicate that peak position in coos does not form 2 distinct categories. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Enhancement of computed tomography liver contrast using iomeprol-containing liposomes and detection of small liver tumors in rats

RATIONALE AND OBJECTIVES: We evaluated iomeprol-containing liposomes (Lipiom), a new contrast medium for computed tomography (CT) liver scanning, in an animal model of chemically induced hepatocellular carcinomas and other liver tumors in rats. METHODS: Liver tumors were induced by administration of carcinogens to rats, either 0.55% (w/w) 1'-hydroxysafrole in the diet or induction by 3'-methyl-4-diethylaminoazobenzene followed by promotion with carbon tetrachloride. CT scanning was performed 1-3 hr after intravenous injection of iomeprol-containing liposomes. RESULTS: After injection of iomeprol-containing liposomes at a dose of 70 mg of liposome-entrapped iodine per kilogram of body weight, the normal liver parenchyma showed a contrast enhancement, in Hounsfield units, of more than 60% over the control value before bolus. Liver tumors with no or few Kupffer cells were not enhanced and appeared as dark areas within the normal parenchyma. Tumors and pretumoral lesions devoid of Kupffer cells, as small as 3 mm in diameter, could be distinguished using this non-invasive method. CONCLUSION: CT liver scanning after injection of iomeprol-containing liposomes appears to be promising method for detecting liver tumors and focal liver lesions.     

Evaluation of Serum Volume Losses During Long-Term Storage

Aliquots of serum collected in a large case-control study of cervical cancer were stored at −70°C for up to 4 years during implementation of the study. When 500 μL serum aliquots were thawed in preparation for carotenoid and vitamin A assays, volumes were noticeably variable and fell below 500 μL in the majority of the samples. We were concerned about evaporation/sublimation during storage of the samples because loss of water would concentrate the analytes of interest. We evaluated the use of density and sodium ion concentration measurements to confirm its occurrence. We found that serum density was an unreliable indicator of extent of volume loss since the anticipated increases in density due to evaporation were of the same magnitude as inter-individual variation in serum density. In contrast, Na⁺ concentration is tightly regulated and would rise if water had been lost from the samples. In a representative sample of serum aliquots from the case-control study, 24 of 25 vials contained less than 500 μL of serum. The mean sodium ion concentration (138.1 ± 3.6 mmol/L) was within the normal range for human serum of 136–145 mmol/L, and no correlation was observed between serum volume and Na⁺ concentration. These results strongly suggest that the observed low volumes were not due to evaporative losses. Instead, the variably low volumes of serum aliquots were probably due to pipetting errors in the initial aliquotting resulting from the use of air-displacement pipettes.     

X-ray Fluorescence Uptake Measurement of Functionalized Gold Nanoparticles in Tumor Cell Microsamples

Quantitative cellular in vitro nanoparticle uptake measurements are possible with a large number of different techniques, however, all have their respective restrictions. Here, we demonstrate the application of synchrotron-based X-ray fluorescence imaging (XFI) on prostate tumor cells, which have internalized differently functionalized gold nanoparticles. Total nanoparticle uptake on the order of a few hundred picograms could be conveniently observed with microsamples consisting of only a few hundreds of cells. A comparison with mass spectroscopy quantification is provided, experimental results are both supported and sensitivity limits of this XFI approach extrapolated by Monte-Carlo simulations, yielding a minimum detectable nanoparticle mass of just 5 pg. This study demonstrates the high sensitivity level of XFI, allowing non-destructive uptake measurements with very small microsamples within just seconds of irradiation time.     

The effect of cooling rate on the impact performance and dynamic mechanical properties of rotationally molded metallocene catalyzed linear low density polyethylene

This article examines changes to the morphology of rotationally molded metallocene catalyzed linear low density polyethylene brought about by varying the cooling rate during processing. These changes in morphology lead to variations in the impact performance, which is reflected in the dynamic mechanical characteristics of the materials. Various analytical techniques are used in an attempt to explain the differences in impact behavior. Slow cooling is shown to result in high crystallinity, and in the formation of large spherulites, which in turn is detrimental to the impact performance of the material, particularly at low temperatures. The high crystallinity corresponds with a shift in the β transition of the material to a higher temperature, and is shown to result in a higher brittle–ductile transition. A case study was also carried out on samples from a finished part provided by an industrial molder, one section of which failed in a brittle manner when impact tested while the other failed in a ductile manner. Microscopy results showed that the brittle material had large spherulites at the inside surface, while the ductile material showed incipient degradation at this surface, which has previously been shown to be of benefit to impact strength in rotationally molded parts. Dynamic mechanical studies again showed a β transition at a higher temperature in the brittle samples. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1963–1971, 2006     

Exploring factors related to users’ experience of public transport route choice: influence of context and users profiles

This exploratory study aims to achieve a better understanding of the users-related factors that affect the choice of routes in public transport (PT). We also look at what can motivate route and modes changes towards alternatives in a real situation. We investigated the experience of 19 users of PTs, using the critical incident technique (Flanagan in Psychol Bull 51(4):327, 1954). We asked participants to report incidents (i.e. situations) in cases they were very satisfied or dissatisfied with their choice. For both situations, the case of their usual route and case of an alternative were considered. A total of 91 incidents were collected and analysed using a multiple correspondences analysis. Additionally, users’ profiles were characterized and superposed to the analysis of incidents content. The main results are as follows. First, the user’s choice of PT route depends on the context (i.e. aim of the travel, time of day). Second, taking an alternative to the usual PT route or using a route combining different transport modes is determined by the context and by factors related to the pleasantness of the travel (e.g. to accompany a friend along the travel). Finally, depending on the user’s profile (i.e. combination of attitude towards PT and demographic variables), the factors taken into account to make the choice of a PT route are related to the efficiency or the pleasantness of the trip. These results show the importance of the contextual factors and the users’ profiles in route choice. They suggest that these factors should be further taken into account in new tools and services for mobility.     

Multisensory VR interaction for protein-docking in the CoRSAIRe project

Proteins take on their function in the cell by interacting with other proteins or biomolecular complexes. To study this process, computational methods, collectively named protein docking, are used to predict the position and orientation of a protein ligand when it is bound to a protein receptor or enzyme, taking into account chemical or physical criteria. This process is intensively studied to discover new biological functions for proteins and to better understand how these macromolecules take on these functions at the molecular scale. Pharmaceutical research also employs docking techniques for a variety of purposes, most notably in the virtual screening of large databases of available chemicals to select likely molecular candidates for drug design. The basic hypothesis of our work is that Virtual Reality (VR) and multimodal interaction can increase efficiency in reaching and analysing docking solutions, in addition to fully a computational docking approach. To this end, we conducted an ergonomic analysis of the protein–protein current docking task as it is carried out today. Using these results, we designed an immersive and multimodal application where VR devices, such as the three-dimensional mouse and haptic devices, are used to interactively manipulate two proteins to explore possible docking solutions. During this exploration, visual, audio, and haptic feedbacks are combined to render and evaluate chemical or physical properties of the current docking configuration.     

Overcoming Anode Instability in Solid-State Batteries through Control of the Lithium Metal Microstructure

Enabling the lithium metal anode (LMA) in solid-state batteries (SSBs) is the key to developing high energy density battery technologies. However, maintaining a stable electrode–electrolyte interface presents a critical challenge to high cycling rate and prolonged cycle life. One such issue is the interfacial pore formation in LMA during stripping. To overcome this, either higher stack pressure or binary lithium alloy anodes are used. Herein, it is shown that fine-grained (d = 20 µm) polycrystalline LMA can avoid pore formation by exploiting the microstructural dependence of the creep rates. In a symmetric cell set-up, i.e., LiǀLi_6.25Al_0.25La₃Zr₂O₁₂(LLZO)ǀLi, fine-grained LMA achieves > 11.0 mAh cm⁻² compared to ≈ 3.6 mAh cm⁻² for coarse-grained LMA (d = 295 µm) at 0.1 mA cm⁻² and at moderate stress of 2.0 MPa. Smaller diffusion lengths (≈ 20 µm) and higher diffusivity pathway along dislocations (D_d ≈ 10⁻⁷ cm² s⁻¹), generated during cell fabrication, result in enhanced viscoplastic deformation in fine-grained polycrystalline LMA. The electrochemical performances corroborate well with estimated creep rates. Thus, microstructural control of LMA can significantly reduce the required stack pressure during stripping. These results are particularly relevant for “anode-free” SSBs wherein both the microstructure and the mechanical state of the lithium are critical parameters.