Ordered Mesoporous In2O3: Synthesis by Structure Replication and Application as a Methane Gas Sensor

The synthesis and characterization of ordered mesoporous In₂O₃ materials by structure replication from hexagonal mesoporous SBA‐15 silica and cubic KIT‐6 silica is presented. Variation of the synthesis parameters allows for different pore sizes and pore wall thicknesses in the products. The In₂O₃ samples turn out to be stable up to temperatures between 450 °C and 650 °C; such high thermal stability is necessary for their application as gas sensors. Test measurements show a high sensitivity to methane gas in concentrations relevant for explosion prevention. The sensitivity is shown to be correlated not only with the surface‐to‐volume ratio, but also with the nanoscopic structural properties of the materials.     

More Than Stories With Buttons: Narrative,Mechanics, and Context as Determinants of Player Experience in Digital Games

Recent research has attempted to describe meaningful experiences with entertainment media that go beyond hedonic enjoyment. Most of this research focuses on noninteractive media, such as film and television. When applied to digital games, however, such research needs to account for not only the content of the medium, but also the unique dimensions of digital games that distinguish them from noninteractive media. Experiences with digital games are shaped by the game mechanics that define the users' interaction with game content, as well as by the opportunities for social interaction that many games offer. We argue that the complex interplay of these dimensions (narrative, mechanics, and context) facilitates or inhibits meaningful user experiences in ways that are unique to digital games.     

Implementation of electron beam grey scale lithography and proximity effect correction for silicon nanowire device fabrication

An electron beam lithography exposure strategy combining efficient proximity effect correction (PEC) with multi-pass grey scale is compared with a more conventional strategy based on a single-pass exposure without PEC. Exposure results for different types of nanowire structures are presented. Line edge and line width roughness (LER and LWR) values for both approaches are determined. The novel exposure strategy presented in this work reduced LER by ∼25% and LWR by ∼40%.     

Test and evaluation of a solar powered gas turbine system

This paper describes the test and the results of a first prototype solar powered gas turbine system, installed during 2002 in the CESA-1 tower facility at Plataforma Solar de Almería (PSA) in Spain. The main goals of the project were to develop a solar receiver cluster able to provide pressurized air of 1000 °C and solve the problems arising from the coupling of the receivers with a conventional gas turbine to demonstrate the operability of the system. The test set-up consists of the heliostat field of the CESA-1 facility providing the concentrated solar power, a pressurized solar receiver cluster of three modules of 400 kWth each which convert the solar power into heat, and a modified helicopter engine (OST3) with a generator coupled to the grid. The first test phase at PSA started in December 2002 with the goal to reach a temperature level of 800 °C at the combustor air inlet by the integration of solar energy. This objective was achieved by the end of this test phase in March 2003, and the system could be operated at 230 kWe power to grid without major problems. In the second test phase from June 2003 to August 2003 the temperature level was increased to almost 1000 °C. The paper describes the system configuration, the component efficiencies and the operation experiences of the first 100 h of solar operation of this very successful first test of a solar operated Brayton gas turbine system.     

Convergence of Broadcast and New Telecom Networks

The demand of the new telecom industry for cost efficient provision of mobile multimedia services is faced with the reality of scarce radio resources. The requirement of spectrum efficiency has driven the development of various digital radio technologies that have been optimized for specific services, namely for broadcast or for mobile communication. However, existing and emerging multimedia services exhibit challenging requirements in terms of asymmetry, interactivity, real-time, and multicast communication. This paper describes an IP based multi-radio infrastructure that enables the co-operation of existing radio networks to combine their capabilities to ensure a spectrum efficient provision of high-quality mobile multimedia services. Further the need for a dynamic allocation of spectrum to radio services is motivated. The basic functionality and the architecture of a multi-radio system is outlined, with a special emphasis on the cooperation between different radio systems. Further an evolution path for the convergence of broadcast and new telecom is desribed, starting from today's systems and leading to a fully coordinated system.     

Microwave treatment of dietary gelatin does not generate cis-4-hydroxy-l-proline, an inhibitor of collagen biosynthesis

Aqueous solutions (5?g/100?ml) of commercial preparations of (a) an enzymatic partial hydrolysate of gelatin and (b) type A gelatin were subjected to threefold heating to boiling in a domestic microwave oven at 750?W and to conventional heating. Then samples were totally hydrolyzed (6?M hydrochloric acid, 110??°C, 24?h) and investigated for the presence of eight possible stereoisomers of 3- and 4-hydroxyproline (Hyp) using capillary gas chromatography. Amino acids were analyzed as N(O)-trifluoroacetyl 2-propyl esters on Chirasil-l-Val and detected by selected ion monitoring mass spectrometry. Blanks of (a) and (b) were analyzed in parallel. Relative amounts of 5.0±0.2% cis-4-d-Hyp were generated from native trans-4-l-Hyp as a result of total hydrolysis in all samples and independent of previous treatment. Notably, neither cis-3-l-Hyp nor cis-4-l-Hyp could be detected in either of the gelatin samples. Thus a report on the generation of antifibrotic and therefore potentially hazardous cis-3-l-Hyp and cis-4-l-Hyp from protein-bonded native trans-3-l-Hyp and trans-4-l-Hyp on microwave heating of infant formulae could not be confirmed.     

The impacts of power boating and water skiing on lakes and reservoirs

Over the last 30 years, the use of motorised recreational craft on inland waters has increased significantly, and it is likely that this trend will continue. This growing use of rivers, lakes and water storage reservoirs for recreational purposes has led to concerns about increasing anthropological pressures on freshwater environments. As a result, numerous studies focusing on the possible impact of power boats on inland waterbodies have been undertaken since the early 1970s, when attention started to be drawn to environmental impacts associated with this type of recreation. This paper presents an overview of identified and documented physical, chemical and biological impacts as a result of motorised recreational activities on lakes and reservoirs. Relevant literature, including research papers, government reports and bibliographies, was consulted in the preparation of this review. It has become obvious that in the past, biological impacts have been underestimated. Thus, there is a need for further, more focused, research into the impacts on not only freshwater ecosystems but on terrestrial biota surrounding recreational waters.     

Near- and Far-Field Characterization of Planar mm-Wave Antenna Arrays with Waveguide-to-Microstrip Transition

We present the design and characterization of planar mm-wave patch antenna arrays with waveguide-to-microstrip transition using both near- and far-field methods. The arrays were designed for metrological assessment of error sources in antenna measurement. One antenna was designed for the automotive radar frequency range at 77 GHz, while another was designed for the frequency of 94 GHz, which is used, e.g., for imaging radar applications. In addition to the antennas, a simple transition from rectangular waveguide WR-10 to planar microstrip line on Rogers 3003? substrate has been designed based on probe coupling. For determination of the far-field radiation pattern of the antennas, we compare results from two different measurement methods to simulations. Both a far-field antenna measurement system and a planar near-field scanner with near-to-far-field transformation were used to determine the antenna diagrams. The fabricated antennas achieve a good matching and a good agreement between measured and simulated antenna diagrams. The results also show that the far-field scanner achieves more accurate measurement results with regard to simulations than the near-field scanner. The far-field antenna scanning system is built for metrological assessment and antenna calibration. The antennas are the first which were designed to be tested with the measurement system.