Hot corrosion Type II of FeCr‐based model alloys for boiler and heat exchanger applications

The hot corrosion Type II of the alloys FeCr20, FeCr20Ni10, FeCr20Ni20, and FeCr20Co10 is investigated at 700°C in air + 0.5% SO₂ with deposits consisting of Na₂SO₄ and a eutectic mixture of Na₂SO₄ and MgSO₄ for 24, 100, and 300 h. The alloying elements nickel and cobalt have a positive influence when tests are conducted using a MgSO₄‐Na₂SO₄ deposit. In this case, they reduce the metal loss and increase the time to the propagation stage. In contrast, when the alloys are exposed with a Na₂SO₄ deposit, these alloying elements increase the metal loss and allow for the transition to the propagation stage because they can form molten phases with the Na₂SO₄. During the incubation stage an oxide scale forms on the FeCr20 alloy, which is thicker than the one formed during exposure without a deposit, and iron oxides are observed, which precipitate in the deposit. The propagation stage occurs by a dissolution and precipitation mechanism forming localized pitting attack. Iron is the main species that dissolves and precipitates, while chromium remains mainly as an oxide beneath the initial surface. The additional elements are found in the pit and in the salt deposit.     

The next-generation business meeting: from i-lands to flexible meeting landscapes

Meetings are an important form of interaction in business settings. However, meetings are often not held in a way that makes all participants feel engaged. Meeting support systems try to overcome this obstacle by helping meeting participants in the meeting workflow. This paper takes a complementary approach by distinguishing between different perspectives of good meetings: the peopleware perspective, the generic groupware perspective, and the roomware perspective. It is argued that all these perspectives have to be considered simultaneously when heading toward an ideal meeting system design. The paper presents excerpts of a pattern language that empowers users to improve their meeting. Besides this, the pattern language can be considered as a tool for the designer. After showing, how both groups made use of the patterns, the paper finally presents LivingAgendas, a meeting support system that can accompany the meeting participant through the meeting life cycle.     

(S)-Reutericyclin: Susceptibility Testing and In Vivo Effect on Murine Fecal Microbiome and Volatile Organic Compounds

We aimed to assess the in vitro antimicrobial activity and the in vivo effect on the murine fecal microbiome and volatile organic compound (VOC) profile of (S)-reutericyclin. The antimicrobial activity of (S)-reutericyclin was tested against Clostridium difficile, Listeria monocytogenes, Escherichia coli, Enterococcus faecium, Staphylococcus aureus, Staphylococcus (S.) epidermidis, Streptococcus agalactiae, Pseudomonas aeruginosa and Propionibacterium acnes. Reutericyclin or water were gavage fed to male BALBc mice for 7 weeks. Thereafter stool samples underwent 16S based microbiome analysis and VOC analysis by gas chromatography mass spectrometry (GC-MS). (S)-reutericyclin inhibited growth of S. epidermidis only. Oral (S)-reutericyclin treatment caused a trend towards reduced alpha diversity. Beta diversity was significantly influenced by reutericyclin. Linear discriminant analysis Effect Size (LEfSe) analysis showed an increase of Streptococcus and Muribaculum as well as a decrease of butyrate producing Ruminoclostridium, Roseburia and Eubacterium in the reutericyclin group. VOC analysis revealed significant increases of pentane and heptane and decreases of 2,3-butanedione and 2-heptanone in reutericyclin animals. The antimicrobial activity of (S)-reutericyclin differs from reports of (R)-reutericyclin with inhibitory effects on a multitude of Gram-positive bacteria reported in the literature. In vivo (S)-reutericyclin treatment led to a microbiome shift towards dysbiosis and distinct alterations of the fecal VOC profile.     

Development of Cr and Al Pack Cementation Coatings on Co-Based γ/γ′ Superalloys

Metallurgical and Materials Transactions A - Co-based superalloys have been developed as candidate materials to replace Ni-based superalloys in hot sections of turbine engines, however, their...     

A generic complete dynamic logic for reasoning about purity and effects

For a number of programming languages, among them Eiffel, C, Java, and Ruby, Hoare-style logics and dynamic logics have been developed. In these logics, pre- and postconditions are typically formulated using potentially effectful programs. In order to ensure that these pre- and postconditions behave like logical formulae (that is, enjoy some kind of referential transparency), a notion of purity is needed. Here, we introduce a generic framework for reasoning about purity and effects. Effects are modelled abstractly and axiomatically, using Moggi’s idea of encapsulation of effects as monads. We introduce a dynamic logic (from which, as usual, a Hoare logic can be derived) whose logical formulae are pure programs in a strong sense. We formulate a set of proof rules for this logic, and prove it to be complete with respect to a categorical semantics. Using dynamic logic, we then develop a relaxed notion of purity which allows for observationally neutral effects such writing on newly allocated memory.     

A well-based reverse-phase protein array applicable to extracts from formalin-fixed paraffin-embedded tissue

Proteomic analysis of formalin-fixed paraffin-embedded (FFPE) tissue offers significant diagnostic utility but is complicated due to the high level of covalently crosslinked proteins arising from formalin fixation. To address these challenges, we developed a reliable protein extraction method for FFPE tissue, based on heat-induced antigen retrieval within a pressure cooker. The protein extraction yield from archival FFPE tissue section is approximately 90% of that recovered from frozen tissue. This method demonstrates preservation of immunoreactivity and recovery of full-length proteins by Western blotting. Additionally, we developed a well-based RP protein array platform utilizing an electrochemiluminescence detection system. Protein samples derived from FFPE tissue by means of laser capture dissection, with as few as 500 shots demonstrate measurable signal differences for different proteins. The lysates coated to the array plate, remain stable over 1?month at room temperature. Theses data suggest that this new protein-profiling platform coupled with the protein extraction method can be used for molecular profiling analysis in FFPE tissue, and contribute to the validation and development of biomarkers in clinical studies.     

Proteomic expression profiling of thyroid neoplasms

Thyroid cancer is the most common endocrine neoplasm with multiple histologic subtypes, each associated with different treatments and outcomes. Differentiating benign neoplasms such as follicular adenomas from malignant entities such as follicular carcinomas and papillary carcinoma can be challenging. To define the proteomic profile of different thyroid tumors, we screened an antibody array of 330 features against five thyroid neoplasms: follicular adenoma, follicular carcinoma, papillary carcinoma, anaplastic carcinoma, and medullary carcinoma as well as normal thyroid epithelium. Eight candidate biomarkers; c-erbB-2, Stat5a, Annexin IV, IL-11, RARα, FGF7, Caspase 9, and phospho-c-myc were identified as differentially expressed on the antibody array, and validated with immunohistochemistry on tissue microarrays, with a total of 144 samples of the same variety of thyroid neoplasms. Analysis revealed c-erbB-2, Annexin IV, and Stat5a have potential clinical utility to differentiate follicular adenoma, follicular carcinoma, and papillary carcinoma from each other. By using an antibody array as a discovery platform and a tissue microarray as a first step in validation on a large number of specimens, we have identified new markers that have potential utility in the diagnosis of thyroid neoplasms.     

Immobilization of dendrimers on Si-C linked carboxylic acid-terminated monolayers on silicon(111)

Poly(amidoamine) dendrimers were attached to activated undecanoic acid monolayers, covalently linked to smooth silicon surfaces via Si-C bonds. The resulting ultra-thin dendrimer films were characterized by X-ray photoelectron spectroscopy (XPS), X-ray reflectometry (XR) and atomic force microscopy (AFM). XPS results suggested amide bond formation between the dendrimer and the surface carboxylic acid groups. XR yielded thicknesses of 10 Å for the alkyl region of the undecanoic acid monolayer and 12 Å for the dendrimer layer, considerably smaller than the diameter of these spherical macromolecules in solution. This was consistent with AFM images showing collapsed dendrimers on the surface. It was concluded that the deformation arose from a large number of amine groups on the surface of each dendrimer reacting efficiently with the activated surface, whereby the dendrimers can deform to fill voids while spreading over the activated surface to form a homogeneous macromolecular layer.     

Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming

Sheet-bulk metal forming processes combine conventional sheet forming processes with bulk forming of sheet semi-finished parts. In these processes the sheets undergo complex forming histories. Due to in- and out-of-plane material flow and large accumulated plastic strains, the conventional failure prediction methods for sheet metal forming such as forming limit curve fall short. As a remedy, damage models can be applied to model damage evolution during those processes. In this study, damage evolution during the production of two different toothed components from DC04 steel is investigated. In both setups, a deep drawn cup is upset to form a circumferential gearing. However, the two final products have different dimensions and forming histories. Due to combined deep drawing and upsetting processes, the material flow on the cup walls is three-dimensional and non-proportional. In this study, the numerical and experimental investigations for those parts are presented and compared. Damage evolution in the process chains is simulated with a Lemaitre damage criterion. Microstructural analysis by scanning electron microscopy is performed in the regions with high mechanical loading. It is observed that the evolution of voids in terms of void volume fraction is strongly dependent on the deformation path. The comparison of simulation results with microstructural data shows that the void volume fraction decreases in the upsetting stage after an initial increase in the drawing stage. Moreover, the concurrent numerical and microstructural analysis provides evidence that the void volume fraction decreases during compression in sheet-bulk metal forming.