Subcutaneous soft tissue tumours at the site of implanted microchips in mice

An experiment using 4279 CBA/J mice of two generations was carried out to investigate the influence of parental preconceptual exposure to X-ray radiation or to chemical carcinogens. Microchips were implanted subcutaneously in the dorsolateral back for unique identification of each animal. The animals were kept for lifespan under standard laboratory conditions. In 36 mice a circumscribed neoplasm occurred in the area of the implanted microchip. Females were significantly more frequently affected than male mice. An influence of age or different treatment on the s.c. tumour incidence in two mice generations could not be observed. Macroscopically, firm, pale white nodules up to 25 mm in diameter with the microchip in its center were found. Microscopically, soft tissue tumours such as fibrosarcoma and malignant fibrous histiocytoma were detected.     

METHODS FOR BRAZING CERAMIC AND METAL-CERAMIC JOINTS

Owing to improved manufacturing processes technical ceramics on the basis of oxide as well as nonoxide ceramics have gained an increasing technical potential. Among other joining techniques brazing has proved to be the most flexible joining process that can easily be adapted to various ceramic-metal-combinations. In order to induce a wetting reaction there are two different approaches. The more complicated process encircles a pre-metallization process and a subsequent brazing process. The less sophisticated process is the 'active brazing process' where special brazing alloys are employed that are able to wet ceramic base materials. Although both joining processes are very flexible there are restrictions regarding the filler metals to be used, the premetallization process and the actual (active-) brazing process.     

The costs and benefits of tonal centers for chord processing.

Harmonic priming studies have shown that a musical context, with its established tonal center, influences target chord processing. This study investigated costs and benefits of priming tonal centers for target processing by adding a baseline condition (sequences without a specific tonal center). Results confirmed harmonic priming, with faster processing for related than for unrelated and less related targets (tonic chord, out-of-key chord, subdominant chord). Comparing targets in baseline contexts with targets in sequences with well-established tonal centers revealed a benefit of processing for related targets but a cost of processing for unrelated and less related targets. Findings are discussed in terms of tonal knowledge activation and suggest that an activated tonal center gives rise to strong expectations for the tonic. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A comparison among 1-, 3-, and 7-horn feeds for a 37-beam MBA

A very common multiple beam antenna (MBA) configuration consists of a collimating device illuminated by an array of feeds. The collimating device is usually a reflector or a lens. The feeds are usually horn antennas with a circular aperture. The reflector is usually offset-fed to eliminate aperture blockage; the lens is center fed. The antenna's feeds are excited to produce a finite number of beams, so as to provide contiguous coverage of the field of view. The designer is forced to minimize the angular spacing between adjacent beams in order to maximize the minimum gain over the antenna's field of view. On the other hand, the feed horn's aperture gain is maximized when the feed horn spacing and its aperture diameter are equal. This results in antenna efficiency of the order of 30% when a single feed horn is excited to produce a beam. When a cluster of 3 or 7 adjacent feed horns are excited to produce a single beam, antenna efficiency can be increased to 50%. When it is tolerable, several identical antenna apertures can be used to replace a single aperture configuration. In this case, each of M apertures produces approximately N/M beams of an MBA that produces N beams. Horns producing adjacent beams do not illuminate the same aperture. This permits the use of a much larger horn aperture for a given beam spacing. This results in reduced spillover, higher gain of each beam, and increased antenna efficiency of each aperture. This paper investigates the maximization of gain for several lens antennas. It shows that antenna gain is increased as its focal length is decreased. That is, a focal length-to-diameter ratio (F/D) less than 1 is preferred     

Tributary use and large-scale movements of grass carp in Lake Erie

Infrequent captures of invasive, non-native grass carp (Ctenopharyngodon idella) have occurred in Lake Erie over the last 30+ years, with recent evidence suggesting wild reproduction in the lake’s western basin (WB) is occurring. Information on grass carp movements in the Laurentian Great Lakes is lacking, but an improved understanding of large-scale movements and potential areas of aggregation will help inform control strategies and risk assessment if grass carp spread to other parts of Lake Erie and other Great Lakes. Twenty-three grass carp captured in Lake Erie’s WB were implanted with acoustic transmitters and released. Movements were monitored with acoustic receivers deployed throughout Lake Erie and elsewhere in the Great Lakes. Grass carp dispersed up to 236 km, with approximately 25% of fish dispersing greater than 100 km from their release location. Mean daily movements ranged from <0.01 to 2.49 km/day, with the highest daily averages occurring in the spring and summer. The Sandusky, Detroit, and Maumee Rivers, and Plum Creek were the most heavily used WB tributaries. Seventeen percent of grass carp moved into Lake Erie’s central or eastern basins, although all fish eventually returned to the WB. One fish emigrated from Lake Erie through the Huron-Erie Corridor and into Lake Huron. Based on our results, past assessments may have underestimated the potential for grass carp to spread in the Great Lakes. We recommend focusing grass carp control efforts on Sandusky River and Plum Creek given their high use by tagged fish, and secondarily on Maumee and Detroit Rivers.     

Investigation of wetting behaviour of hardenable copper based-alloys for brazing applications

ABSTRACT

Tools for machining are exposed to high loads, wear, and elevated temperatures. Commonly, such tools consist of cemented carbides and tool steel. To combine the advantages of both materials, high-quality-joints with high strengths are desired. When brazing these materials, the main challenge is the mismatch of the Coefficient of Thermal Expansion (CTE) and the poor wettability of cemented carbides by molten filler alloys. In this regard, the feasibility of two custom-made alloys (CuNi12Si5, CuNi12Si5B0.4) was analysed. Besides being a cost-efficient alternative, these alloys offer the possibility to modify their mechanical properties by precipitation hardening to reduce stresses within the final joints. Thus, this paper shows that a temperature of 1060°C is suitable for wetting and brazing tests on different substrates.     

X‐ray diffraction (XRD)‐studies on the temperature dependent interface reactions on hafnium,zirconium, and nickel coated monocrystalline diamonds used in grinding segments for stone and concrete machining

Diamond impregnated metal matrix composites are the state of the art solution for the machining of mineral materials. The type of interface reactions between the metal matrix and diamond surface has an essential influence on the tool performance and durability. To improve the diamond retention, the diamonds can be coated by physical vapour deposition with metallic materials, which enforce interface reactions. Hence, this paper focuses on the investigation of the interfacial area on metal‐coated monocrystalline diamonds. Hafnium and zirconium, both known as carbide forming elements, are used as coating materials. The third coating, which is used to determine its catalytic influences when applied as a physical vapour deposition (PVD)‐layer, is nickel. Additionally, the coated diamond samples were heat‐treated to investigate the starting point of the formation of new phases. X‐ray diffraction‐analyses revealed the assumed carbide formation on hafnium and zirconium coated samples. The formation temperature was identified between 800 °C and 1000 °C for hafnium and zirconium coatings.     

For an updated acupuncture

The author proposes an acupuncture which is characterized by its complete break with the ancient chinese physiopathology and its concepts of "acupuncture points" (in the old sense of the term) of "meridians", "energies", "ying-yang" etc.. This process of renewal of the practice and the theory has been coined "contemporary acupuncture". Its originality stands out in comparison with most teachings of acupuncture which have remained faithful to traditional acupuncture. Contemporary acupuncture creates bridges between acupunture and classical medicine. It offers simple therapeutic gestures to general practitioners. Acupuncture acts, from a clinical point of view, particularly through the following forms of action: a) a relaxing action on striated muscle; b) an anti-inflammatory action on the ligaments; c) an antidepressant and anxiolytic action.     

Differential expression of ICAM-1 and LFA-1 versus L-selectin and VCAM-1 in autoimmune insulitis of NOD mice and association with both Th1- and Th2-type infiltrates

The infiltration of pancreatic islets by mononuclear cells is the hallmark of the development of insulin dependent diabetes mellitus (IDDM) in the NOD mouse, an animal model for human IDDM. The aim, of this study was to correlate adhesion molecule expression with the degree of islet infiltration and to compare Th1- and Th2-driven islet inflammation. Cryostat sections of NOD mouse pancreata before and after diabetes development were analysed by semiquantitative immunohistochemistry. NOD mouse islets did not show the expression of ICAM-1, LFA-1, L-selectin and VCAM-1 prior to infiltration by mononuclear cells. Furthermore, islets with early stage insulitis (grade 1, periinsular location of small infiltrates) still were devoid of adhesion molecule expression. ICAM-1 and LFA-1 were first demonstrable in islets with strong periinsular infiltrates (insulitis grade 2) while L-selectin and VCAM-1 were only seen in islets with mild or strong intraislet infiltration (grade 3-4). Adhesion molecules were demonstrable in areas of macrophage and T-lymphocyte infiltrates but not in adjacent endocrine islet tissue. Islets of all infiltration stages contained Th2 lymphocytes (positive for IL-4). Substantial numbers of Th1 cells (positive for IFN-gamma, TNF-alpha, IL-2 and/or IL-2 receptor) were observed only after acceleration of diabetes development by a single injection of cyclophosphamide (250 mg/kg i.p.). Interestingly, the adhesion molecule expression pattern in islets with "Th1' versus "Th2 insulitis' was not different. In conclusion, the expression of adhesion molecules in islets during the development of autoimmune diabetes does not precede mononuclear infiltration but probably occurs in response to the activation of initial small infiltrates. ICAM-1 and LFA-1 expression is seen prior to L-selectin and VCAM-1. However, adhesion molecule expression during Th1 versus Th2 cell infiltration is very similar, suggesting similar adhesion molecule requirements of the two Th subsets.