Machining of reproducible flaws corresponding to fatigue cracks for fracture mechanics tests of components and welded joints

In connection with the analysis and the development of failure concepts in fracture mechanics for quasistatic loaded components and elastic-plastic behaviour of the material, tests are also carried out with welded and/or complex shaped specimens or structures. Thereby the difficulty arises of generating reproducible flaws in the form of fatigue precracks in definite positions in the components, respectively in the welded joint. It is reported exemplarily about experiments on different CT25 and CCT specimens and on a pressure vessel which contained a fatigue pre-crack, a 0.2 mm saw cut or notches with notch root radius ≤ ≥ 0.1 mm as flaws. The comparison of the results with regard to J-integral at initiation of stable crack, J_i, and J_R curves shows that under certain conditions the 0.2 mm saw cut (notch root radius ≤ ≤ 0.02 mm) is a useful alternative, if reproducible generation of a fatigue pre-crack will not be successful or too expensive. The tests were carried out on StE 460 and on a welded joint of this steel at 25 ± 2°C.     

Quality management in service ecosystems

Service-oriented architectures and Web services mature and have become more widely accepted and used by industry. This growing adoption increased the demands for new ways of using Web service technology. Users start re-combining and mediating other providers’ services in ways that have not been anticipated by their original provider. Within organisations and cross-organisational communities, discoverable services are organised in repositories providing convenient access to adaptable end-to-end business processes. This idea is captured in the term Service Ecosystem. This paper addresses the question of how quality management can be performed in such service ecosystems. Service quality management is a key challenge when services are composed of a dynamic set of heterogeneous sub-services from different service providers. This paper contributes to this important area by developing a reference model of quality management in service ecosystems. We illustrate the application of the reference model in an exploratory case study. With this case study, we show how the reference model helps to derive requirements for the implementation and support of quality management in an exemplary service ecosystem in public administration.     

Reticulated Porous Foam Ceramics with Different Surface Chemistries

The aim of this study was to discuss the influence of different filter surface chemistries on the properties of foam filters. For reliable results, it is essential to ensure comparable structural properties (cell size and strut thickness) for all different surface chemistries (Al₂O₃, MgAl₂O₄, 3Al₂O₃·2SiO₂, SiO₂, and TiO₂) possess the same structural properties (cell size and strut thickness). Filters made of 100% of the investigated materials and alumina skeletons coated with the investigated materials were prepared. The coated alumina samples were sintered in one and two steps. The processing route with two sintering steps resulted in improved mechanical properties and comparable shrinkage and strut thickness. The 100% bulk foams possessed different pore sizes due to the differences of the material shrinkage. In this study, a comparison of the experimental investigated properties of the ceramic foam filters and the theoretically calculated values for foam materials derived from the bulk material properties is established.     

Chromatographische Untersuchungen zur Polydispersität von Hydroxyethylstärke

Chromatographic Studies on the Polydispersity of Hydroxyethyl Starch. A representative sample of clinically used hydroxyethyl starch was separated by semipreparative HPSEC into narrow fractions in the range of approx. 3.000 to 800.000 D. The original sample and selected fractions were characterised by gaschromatographic methylation analysis according to their substitution degrees MS and DS, which were differentiated by the substitution positions at C2, C3 and C6 of the anhydroglucoses and their kind of glycosidic bonding α-1, α-1,4 or α-1,4,6, respectively. Furthermore, polydispersity in relations to the degree of branching was determined. Mark-Houwink and molecular weight distribution parameters determined by multi-detection HPSEC are reported. The presented data demonstrate a extensive homogeneity of the original sample. The clinical relevance is discussed.     

High Iron and Iron Household Protein Contents in Perineuronal Net-Ensheathed Neurons Ensure Energy Metabolism with Safe Iron Handling

A subpopulation of neurons is less vulnerable against iron-induced oxidative stress and neurodegeneration. A key feature of these neurons is a special extracellular matrix composition that forms a perineuronal net (PN). The PN has a high affinity to iron, which suggests an adapted iron sequestration and metabolism of the ensheathed neurons. Highly active, fast-firing neurons—which are often ensheathed by a PN—have a particular high metabolic demand, and therefore may have a higher need in iron. We hypothesize that PN-ensheathed neurons have a higher intracellular iron concentration and increased levels of iron proteins. Thus, analyses of cellular and regional iron and the iron proteins transferrin (Tf), Tf receptor 1 (TfR), ferritin H/L (FtH/FtL), metal transport protein 1 (MTP1 aka ferroportin), and divalent metal transporter 1 (DMT1) were performed on Wistar rats in the parietal cortex (PC), subiculum (SUB), red nucleus (RN), and substantia nigra (SNpr/SNpc). Neurons with a PN (PN⁺) have higher iron concentrations than neurons without a PN: PC 0.69 mM vs. 0.51 mM, SUB 0.84 mM vs. 0.69 mM, SN 0.71 mM vs. 0.63 mM (SNpr)/0.45 mM (SNpc). Intracellular Tf, TfR and MTP1 contents of PN⁺ neurons were consistently increased. The iron concentration of the PN itself is not increased. We also determined the percentage of PN⁺ neurons: PC 4%, SUB 5%, SNpr 45%, RN 86%. We conclude that PN⁺ neurons constitute a subpopulation of resilient pacemaker neurons characterized by a bustling iron metabolism and outstanding iron handling capabilities. These properties could contribute to the low vulnerability of PN⁺ neurons against iron-induced oxidative stress and degeneration.     

Design and Fabrication of Transparent and Gas‐Tight Optical Windows in Low‐Temperature Co‐Fired Ceramics

Low‐temperature co‐fired ceramics (LTCC) enable the fabrication of microfluidic elements such as channels and embedded cavities in electrical devices. Hence, LTCC facilitate the realization of complex and integrated microfluidic devices. Examples can be applied in many areas like reaction chambers for synthesis of chemical compounds. However, for many applications it is necessary to have an optically transparent interface to the surroundings. The integration of optical windows in LTCC opens up a wide field of new and innovative applications such as the observation of chemiluminescent reactions. These chemical reactions emit electromagnetic radiation and thus offer a method for noninvasive detection. Thin glasses (≤500 μm) were bonded by thermocompression onto a LTCC substrate. As the bonding agent, a glass frit paste was used. Borosilicate glasses, fused silica as well as silicon were successfully bonded onto LTCC. To join materials with a large coefficient of thermal expansion mismatch (i.e., fused silica and LTCC), it is necessary to limit the heat input to the bond interface. Therefore, a heating structure was integrated into the LTCC substrate beneath the bond interface. This bonding process provides a gas‐tight optical port with a high bond strength.     

Horton and Wohl Revisited: Exploring Viewers' Experience of Parasocial Interaction

Linking back to D. Horton and R. Wohl (1956) , the present approach conceptualizes and empirically examines viewers' parasocial interaction experience with a TV performer. Causes and outcomes of parasocial interaction experience are examined. To this end, a new Experience of Parasocial Interaction (EPSI) scale is introduced. In a 2 (Bodily Addressing) × 2 (Verbal Addressing) between‐subjects experiment (N = 198) viewers reported a more intense parasocial experience if they were addressed by a TV performer on a bodily and verbal level. In addition, the more viewers perceived the performer to be attractive and the stronger their perspective‐taking ability, the more intense their parasocial experience. Stronger parasocial experience resulted in higher commitment to social norms and a greater enjoyment of the exposure situation.     

Detection of the gasoline components methyl tert-butyl ether,benzene, toluene,and m-xylene using ion mobility spectrometers with a radioactive and UV ionization source

For the first time, ion mobility spectrometers (IMS) with radioactive and UV ionization sources in combination with multicapillary columns (MCCs) have been used to determine methyl tert-butyl ether (MTBE), a gasoline additive, in water and nitrogen as well as the monoaromatic compounds benzene, toluene, and m-xylene (BTX). A membrane extraction unit was set up to extract the substances from water, which is simple, effective, and easy to automate for further applications. Thus, the detection of MTBE and BTX of gasoline vapors was accomplished after a preliminary silicone membrane extraction. Two-dimensional data analyses of IMS-chromatograms allow us to separate these substances clearly according to their different retention and drift times. Method detection limits for MTBE were 2 microg/L (UV) and 30 pg/L (63Ni) in nitrogen and 20 mg/L (UV) and 1 microg/L (63Ni) in water. Rather a good reproducibility was achieved with relative standard deviations of between 2.9 and 9%. The method presented in this article has been proven to be suitable for nearly real-time monitoring as the total analysis time is less than 90 s. As an example of application, the detection of MTBE and BTX in a mixture of volatile organic compounds of pure gasoline using the 2-D IMS-chromatogram is presented.     

Investigation of buried quantum dots using grazing incidence X-ray diffraction

Self-organized, buried InAs quantum dots covered by an AlAs diffusion barrier were investigated under UHV conditions using grazing incidence X-ray diffraction. The experimental data is compared to the simulated results obtained by Finite Element Method and Distorted Wave Born Approximation. We have found that the simulated data could be compared to the experimental one only after convolution by the resolution element which can be estimated from the experiment. By adjusting the simulation parameters we were able to find good agreement between the simulated and the measured data.