Antimicrobial functionalization of Ca alginate-coconut oil latent heat storing microcapsules by Ag nanoparticles

Latent heat storage by phase change materials (PCM) is a promising way of thermal energy storage for equilibrating the daily fluctuation of temperature in office- and home buildings. Bio-originated compounds have got great importance to evade further plastic contamination all over the world. Durability of biodegradable natural materials by means of environmentally friendly agents is an exciting challenge. In this study Ca alginate-coconut oil eco-friendly core-shell PCM microcapsules were functionalized with Ag nanoparticles, following their synthesis using harmless reducing agents. Throughout the preparation of the PCM microcapsules by repeated interfacial coacervation/crosslinking procedure, the Ag nanoparticles were homogeneously dispersed in the Ca alginate shell. High coconut oil content was achieved in the Ag nanoparticle-loaded microcapsules, which was not influenced by the Ag nanoparticle content. The high PCM content resulted in correspondingly high latent heat storing capability. The freezing and melting heat storing capacities were in the range of 83.6 and 85.6 J/g, as well as 89.7 to 92.6 J/g, respectively, matching to the extremely high PCM content in the range of 82.7% to 84.8% (m/m). Leaking of the heat storing microcapsules was not observed after 200 heating-cooling cycles. The Ag nanoparticle content did not influence the PCM ratio of the microcapsules, although as expected their antimicrobial potential was significantly enhanced by it. The highest Ag nanoparticle loading, that was 1.3% (m/m) related to the total mass of microcapsules, exerted excellent antibacterial and antifungal impact.     

Sustainable Stabilizer-Free Nanoparticle Formulations of Valsartan Using Eudragit® RLPO

The bioavailability of the antihypertensive drug valsartan can be enhanced by various microencapsulation methods. In the present investigation, valsartan-loaded polymeric nanoparticles were manufactured from Eudragit^® RLPO using an emulsion–solvent evaporation method. Polyvinyl alcohol (PVA) was found to be a suitable stabilizer for the nanoparticles, resulting in a monodisperse colloid system ranging in size between 148 nm and 162 nm. Additionally, a high encapsulation efficiency (96.4%) was observed. However, due to the quaternary ammonium groups of Eudragit^® RLPO, the stabilization of the dispersion could be achieved in the absence of PVA as well. The nanoparticles were reduced in size (by 22%) and exhibited similar encapsulation efficiencies (96.4%). This more cost-effective and sustainable production method reduces the use of excipients and their expected emission into the environment. The drug release from valsartan-loaded nanoparticles was evaluated in a two-stage biorelevant dissolution set-up, leading to the rapid dissolution of valsartan in a simulated intestinal medium. In silico simulations using a model validated previously indicate a potential dose reduction of 60–70% compared to existing drug products. This further reduces the expected emission of the ecotoxic compound into the environment.     

Halochromic Behavior and Anticancer Effect of New Synthetic Anthocyanidins Complexed with β-Cyclodextrin Derivatives

Anthocyanidins, the aglycons of anthocyanins, are known, beyond their function in plants, also as compounds with a wide range of biological and pharmacological activities, including cytostatic effect against various cancer cells. The nature and position of the substituents in the flavylium cation is essential for such biological properties, as well as the equilibrium between the multistate of the different chemical species that are generated by the flavylium cation, including quinoidal base, hemiketal, and cis- and trans-chalcones. In this work, eight new flavylium derivatives were synthesized, characterized for confirmation of the structure by FT-IR and 2D-NMR, and investigated in vitro as possible cytostatic compounds against HCT116 and HepG2 cancer cells. The most active two compounds were explored for their halochromic properties that can influence the biological activity and subjected to molecular encapsulation in β-cyclodextrin derivatives in order to increase their solubility in water and bioavailability. The anticancer effect was influenced by the position (6-, 7-, or 8-) of the methoxy group in the β-ring of the methoxy-4′-hydroxy-3′-methoxyflavylium cation, while the study of the halochromic properties revealed the important role played by the chalcone species of the pH-dependent multistate in both the uncomplexed and inclusion complex forms of these anthocyanidins.     

Nanostructured micronized solid dispersion of crystalline-amorphous metronidazole embedded in amorphous polymer matrix prepared by nano spray drying

In this study metronidazole drug was encapsulated by hydroxypropyl methylcellulose and polyvinylpyrrolidone polymers from solutions using nano spray drying technology. The influence of the process parameters and formulation variables were investigated on product morhology and structure, production yield and entrapment efficiency. The use of surface active admixtures (polyvinyl alcohol, Tween-80 and Pluronic F68) increased the product yield substantially. The entrapped metronidazole was partially in crystalline and amorphous state in both amorphous polymers as confirmed by DSC and powder X-ray diffraction measurements. In the composites with hydroxypropyl methylcellulose the degree of crystallinity was between 50.2 and 81.0%, and with polyvinylpyrrolidone between 35.0 and 50.0% (with respect to the drug content). Melting point decrease phenomena was observed by differential scanning calorimetry between bulk metronidazole and spray dried products. Peak broadening was indicated by powder X-ray diffraction measurements, which could be the result of formation of small drug crystallites. The TEM images showed beside the larger crystals (200–400 nm) a fraction of smaller crystals (20–50 nm in diameter), which are in good correlation with the calculated coherent scattering domain sizes of 19–87 nm based on X-ray data. The drug-polymer composites produced by nano spray drying process were identified as crystalline-amorphous nanostructured micronized solid dispersions.     

Aromatic reduction properties of molybdenum sulfide clusters in HY zeolite

Molybdenum sulfide catalysts supported on an HY zeolite at various Mo contents were studied. Catalysts were prepared by incipient wetness impregnation with ammonium heptamolybdate solution and calcined without drying. Their reactivity has been evaluated in toluene hydrogenation under typical hydrotreating conditions. Compared to alumina supported catalysts, zeolite supported Mo catalysts are extremely active for aromatics hydrogenation. At low molybdenum loading, molybdenum sulfide phases inside the zeolite show a particularly high intrinsic activity. This activity can be attributed to molybdenum sulfide clusters differing from MoS₂ slabs.     

Study on time resolution of single event TOF-RBS measurement

Flight paths and times of secondary electrons, induced by a focused ion beam, from a sample to a secondary electron detector (SED), were simulated with various shield shapes of a SED for improving the time resolution of time-of-flight Rutherford backscattering spectrometry (TOF-RBS) using the secondary electron signal as a start signal, the results of which were compared with experimental time resolutions of the TOF-RBS measurement. The fluctuation in the flight path and, hence, flight time of the secondary electron deteriorates the time resolution of TOF-RBS. The simulated flight time differences for SEDs with or without a shield were 4.4–41 ns with a shield and 1.0 ns without a shield, respectively, indicating that the SED without the shield would improve the time resolution of the single event TOF-RBS. The time resolutions of TOF-RBS using 150 keV Be⁺ for Au/Si sample with SEDs with and without a shield were 5.6–9.2 and 4.4 ns, respectively. The improved time resolution for SEDs without the shield was confirmed experimentally.     

GraphClus,a MATLAB program for cluster analysis using graph theory

Cluster analysis is used in numerous scientific disciplines. A method of cluster analysis based on graph theory is discussed and a MATLAB? code for its implementation is presented. The algorithm is based on the number of variables that are similar between samples. By changing the similarity criterion in a stepwise fashion, a hierarchical group structure develops, and can be displayed by a dendrogram. Three indexes describe the homogeneity of a given variable in a group, the heterogeneity of that variable between two groups, and the usefulness of that variable in distinguishing two groups. The algorithm is applied to both a synthetic dataset and a set of trace element analyses of lavas from Mount Etna in order to compare GraphClus to other cluster analysis algorithms.     

Nano Design of Alumina Supported Monometallic Catalysts: A Promising Way to Improve the Selective Hydrogenation of Poly-Unsaturated Hydrocarbons

In the field of catalysis by metals, a new insight for the nanodesign of supported heterogeneous catalysts is the tailoring of metallic nanoparticles. In this work, well-faceted monometallic nanoparticles (Pd, Pt, Ni) exposing mostly the {111} crystallographic facet are obtained in aqueous solution and are deposited on an alumina support. The involved mechanisms of nanoparticles formation are determined and are evidenced to be different as a function of the nature of the metal. In the case of palladium the mechanism consists in an oriented attachment of palladium nanoparticles leading to the energetically most favourable stacking of nanoparticles, at the origin of the early differentiation of the nanoparticles shapes and of the formation of the well-faceted palladium nanoparticles. In the case of platinum, the mechanism seems to be a combination of aggregation of already reduced nuclei and direct reduction depending on the experimental conditions. In the case of the less reductible metal, nickel, well-faceted nanoparticles are not obtained during the synthesis and only a thermal activation under hydrogen can engender their formation. The impact of the {111} crystallographic facet for platinum and nickel is very important and induces a drastic increase of selectivity towards olefins formation with a selectivity close to the one of a palladium catalyst which is the most selective metal for the selective hydrogenation of poly-unsaturated hydrocarbons.     

Enhancement of oxygen mass transfer rate in the presence of nanosized particles

Absorption of gases into a liquid is essentially important for two- or three-phase reactions, because the diffusion of a sparingly soluble gas, like oxygen, across a gas-liquid interface generally limits the reaction rates. Using a third, dispersed phase, the mass transfer rate could be significantly increased. The question arises how the absorption rate can be described in the presence of very fine, nanometer size particles or droplets. Its mathematical model should take into account the specific properties of the nanoparticles, e.g. the Brownian motion of particles, its effect on the diffusion of the bulk phase molecules, the mass transfer rate into the nanoparticles, its dependency on the particle size, etc. The mass transfer rate of oxygen, in the presence of nanometer size, organic droplets, has been investigated both experimentally, using organic submicron n-hexadecane droplets, and theoretically. The effect of the Brownian motion of the nanoparticles as well as its effect on the diffusivity in the nanofluid has been discussed. Accordingly, the enhanced diffusion coefficient, due to the convective motion of the continuous liquid phase induced by the moving particles, has been predicted and its effect on the mass transfer enhancement has been calculated using both homogeneous and heterogeneous mathematical models. The predicted data were compared to the measured ones.