Preparation and characterization of porous and electrically conducting carbon-clay composites

Porous and electrically conducting carbon-clay composites were prepared by firing mixtures of carbon powder (0 to 20 wt%) and clay minerals. They showed porosity of 50 to 65% and had high mechanical strength (compressive strength = 130 to 400 kg cm^–2) as well as high resistance against thermal oxidation in air. Their electrical conductivity, , increased with increasing carbon content levelling off at about 20 wt% of carbon content to give a value of about 2 S cm^–1. Formation of carbon chains is considered to be responsible for the electrical conduction in the composite, and a model to correlate the electrical conductivity with the carbon content has been proposed by modifying a model previously proposed by Scarisbrick.     

Barium Carbonate Phase on the Surfaces of Barium Titanate Particles and in Situ Transmission Electron Microscopy Observation of Its Decomposition

A BaCO₃ phase is found on the surfaces of hydrothermally synthesized BaTiO₃ particles; it occurs as aggregates or small protuberances. A small proportion of the phase decomposes to BaO crystallites when heated by a convergent electron beam in a transmission electron microscope. The BaO and BaCO₃ crystallites disappear when they are irradiated successively by the convergent electron beam. The BaO crystallites and the BaCO₃ phase sublimate and/or react with BaTiO₃ crystals whose surface layers are deficient in Ba²⁺ ions.     

Deposition of dense isotropic carbon from acetylene in fluidized bed

Pyrolytic carbon was deposited from acetylene in a fluidized bed at 1100°C on alumina microspheres. In case when only argon was used as the diluent gas, density and BAF of the deposit decreased and deposition yield increased with increasing acetylene concentration. Hydrogen sypply suppressed carbon formation and, consequently, caused an increase in density and Lc. BAF was relatively independent of hydrogen concentration. It was found that high density, isotropic carbon can be deposited from acetylene at 1100°C, if an appropriate proportion of hydrogen is added.     

Measurement of residual stresses in injection‐molded polymer parts by time‐resolved fluorescence

Time‐resolved fluorescence properties of 9‐methylanthracene (9MAn) dispersed in film of polyvinylchloride (PVC) containing carbon black were studied under tensile loadings. The fluorescence lifetime of 9MAn decreased from 5.70 to 5.55 ns, whereas the stresses acting on the films increased from 0 to 3 MPa. The change in fluorescence lifetimes of 9MAn during the stress relaxation process showed that the fluorescence lifetimes were correlated with the stresses, not with the strains. The results suggest that 9MAn is a useful probe for monitoring stresses acting on the matrix. With the use of the fluorescence properties of 9MAn, the residual tensile stresses on the skin‐layer of PVC injection‐molded test pieces were estimated. The estimated residual stresses were about ～ 1 MPa. The residual stresses were relaxed to 0 MPa with annealing at 100°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2600–2603, 2002     

Thermal Expansion of Solid Solutions in the ZrTiO4—In2O3—M2O5 (M = Sb, Ta) System

Axial and dilatometric thermal expansions and phase transformations were studied for solid solutions having the α-PbO₂ structure in the ZrTiO₄—In₂O₃—M₂O₅ (M = Sb, Ta) system with nominal formulas of Zr _x Ti _y In _z Sb _z O₄ and Zr _x Ti _y In _z Ta _z O₄ where x + y + 2 z = 2. With increased substitution of z , the cell volume increased, the difference in the b parameters at room temperature between those quenched from 1400° and 1000°C decreased, and the thermal expansion decreased. The axial thermal expansion of ZrTi _y In _z · Ta _z O₄ with z = 0.3 was almost identical with that of HfTiO₄, and those with z = 0.4 and z = 0.45 were smaller than that of HfTiO₄. Unit-cell volumes of these compound were compared with those of single oxides to make it clear that the unit-cell volume of ZrTiO₄ was small anomalously and to distinguish the normal and abnormal substitution systems. These results were explained by the working hypothesis proposed for these compounds.     

Photoelectronic displacement sensor with nanometre resolution

The design of an ultraprecision displacement sensor with sub-nanometre resolution is proposed for the use of ultraprecision technologies. The sensor is based on the highly sensitive detection of power change at a specific point in light reflected from an object surface when the surface is subject to a small displacement. The sensor consists of a single light source, the reflective object and reference surfaces, optical fibre bundles for tranmission of the illuminating and the reflected light, and the photodiode set-up. In operation, the object and the reference surfaces are illuminated by light transmitted through the optical fibre bundle from the single light source. The reflected light from both surfaces is then transmitted through the optical fibre bundle to two individual but equivalent photodiodes. By using a differential amplifier, the diodes give a highly sensitive displacement signal which is included in the total signal of the reflected light. The sensor proposed has some distinctive features in its performance, such as non-contact measurement, a high resolution of 0.5 nm, a wide working range of about 30 μm within 5% linearity, and the sufficient stability of 1 nm in 20 s for specific research purposes.     

Screening the p53 status of human cell lines using a yeast functional assay

We have screened the p53 status of 156 human cell lines, including 142 tumor cell lines from 27 different tumor types and 14 cell lines from normal tissues by using functional analysis of separated alleles in yeast. This assay enables us to score wild-type p53 expression on the basis of the ability of expressed p53 to transactivate the reporter gene HIS3 via the p53-responsive GAL1 promotor in Saccharomyces cerevisiae. Of 142 tumor cell lines, at least 104 lines (73.2%) were found to express the mutated p53 gene: 94 lines (66.2%) were mutated in both alleles, three lines (2.1%) were heterozygous, and no p53 cDNA was amplified from seven lines (4.9%). Of the 14 cell lines originating from normal tissues, all the transformed or immortalized cell lines expressed mutant p53 only. Yeast cells expressing mutant p53 derived from 94 cell lines were analyzed for temperature-sensitive growth. p53 cDNA from eight cell lines showed p53-dependent temperature-sensitive growth, growing at 30 degrees C but not at 37 degrees C. Four temperature-sensitive p53 mutations were isolated: CAT-->CGT at codon 214 (H214R), TAC-->TGC at codon 234 (Y234C), GTG-->ATG at codon 272 (V272M), and GAG-->AAG (E285K). Functionally wild-type p53 was detected in 38 tumor cell lines (26.8%) and all of the diploid fibroblasts at early and late population doubling levels. These results strongly support the previous findings that p53 inactivation is one of the most frequent genetic events that occurs during carcinogenesis and immortalization.     

Lipids of cyanobacteriumAphanizomenon flos-aquae and inhibition ofChlorella growth

The inhibition of the growth of the green algaChlorella pyrenoidosa by the lipids of the cyanobacteriumAphanizomenon flos-aquae is associated with the fractions containing long-chain unsaturated fatty acids. A sterol present inAphanizomenon has been identified as poriferasterol.