Noise and machine failures: determining factors in the acceptance and behavior of O2 concentrator. The Asturias project

Whether a sulfonylurea may be used together with insulin for treating NIDDM has been controversial. One view, based on older studies, has been that the additional benefit is too small or the level of glucose control achieved usually too poor to recommend this method. More recent studies of a more specific way of combining a sulfonylurea with insulin are more supportive. When a single injection of insulin taken in the evening is added to a sulfonylurea at the time of secondary failure of the sulfonylurea alone, glycemic control is quite simply and consistently restored to acceptable levels. At this time in the natural history of NIDDM, evening insulin combined therapy is more effective than a single injection of insulin alone, and just as effective as a more complex multiple-injection regimen without an oral agent. A recent multicenter trial of a new sulfonylurea, glimepiride, in combination with a single injection of 70/30 insulin before dinner has confirmed that this approach is safe and more consistently effective than insulin alone for obese patients beginning insulin in a setting resembling clinical practice. The available evidence suggests this form of combined therapy is suitable for routine use.     

Human DNA topoisomerase I-mediated cleavages stimulated by ultraviolet light-induced DNA damage

DNA topoisomerases have been proposed as the proteins involved in the formation of the DNA-protein cross-links detected after ultraviolet light (UV) irradiation of cellular DNA. This possibility has been investigated by studying the effects of UV-induced DNA damage on human DNA topoisomerase I action. UV lesions impaired the enzyme's ability to relax negatively supercoiled DNA. Decreased relaxation activity correlated with the stimulation of cleavable complexes. Accumulation of cleavable complexes resulted from blockage of the rejoining step of the cleavage-religation reaction. Mapping of cleavage sites on the pAT153 genome indicated UV-induced cleavage at discrete positions corresponding to sites stimulated also by the topoisomerase I inhibitor camptothecin, except for one. Subsequent analysis at nucleotide level within the sequence encompassing the UV-specific cleavage site revealed the precise positions of sites stimulated by camptothecin with respect to those specific for UV irradiation. Interestingly, one of the UV-stimulated cleavage sites was formed within a sequence that did not contain dimerized pyrimidines, suggesting transmission of the distortion, caused by photodamage to DNA, into the neighboring sequences. These results support the proposal that DNA structural alterations induced by UV lesions can be sufficient stimulus to induce cross-linking of topoisomerase I to cellular DNA.     

Development and validation of a Monte Carlo simulation of photon transport in an Anger camera

The geometric component of the point spread function (PSF) of a gamma camera collimator can be determined analytically, and the penetration component can be calculated readily by numerical ray-tracing. A Monte Carlo simulation of photon transport which includes collimator scatter is developed. The simulation was implemented with an array processor which propagates up to 1024 photons in parallel, allowing accurate estimates of the total radial PSF in less than a day. The simulation was tested by imaging monoenergetic point sources of Tc-99m, Cr-51, and Sr-85 (140, 320, and 514 keV, respectively) on a General Electric Star Cam with low-energy, general-purpose, and medium-energy collimators. Comparisons of measured and simulated PSFs demonstrate the validity of the model and the significance of collimator scatter in the degradation of image quality.     

Modeling guided wave propagation with application to the long-range defect detection in railroad tracks

The aim of this work is to demonstrate the use of a commercial finite element package, ABAQUS EXPLICIT, to model ultrasonic guided waves in structural components. The particular application of interest is modeling the interaction of a broadband vertical bending mode with transverse-type defects in railroad tracks. This topic is part of a broader project on high-speed defect detection in rails by long-range ultrasonic inspections. Reflection coefficient spectra in the 20–45 kHz range are obtained for four different sizes and three different orientations of transverse head flaws. A preliminary study of Lamb waves in a free plate helps drawing modeling guidelines for the rail.     

The effect of niobium ion implantation on the oxidation behavior of aγ-TiAl-based intermetallic

The effect of niobium implantation (2×10¹⁶ and 10¹⁷ ions/cm²) on the oxidation behavior of a -TiAl-based intermetallic alloy Ti–48Al–2Cr in air at 800°C has been examined. Isothermal studies with exposure times up to 200 hr and cyclic-oxidation tests up to 800 hr revealed a negligible effect for the low implantation dose. However, a remarkable decrease in oxidation rates was observed for the material implanted with 10¹⁷ Nb ions/cm². The improvement in the oxidation resistance appeared to be similar to that obtained by alloying of the intermetallic with a few atomic percent niobium. Possible mechanisms for the effect of niobium on the oxidation resistance of TiAl-base intermetallics are discussed in view of the results obtained for the implanted material.     

A cubic regularization algorithm for unconstrained optimization using line search and nonmonotone techniques

In recent years, cubic regularization algorithms for unconstrained optimization have been defined as alternatives to trust-region and line search schemes. These regularization techniques are based on the strategy of computing an (approximate) global minimizer of a cubic overestimator of the objective function. In this work we focus on the adaptive regularization algorithm using cubics (ARC) proposed in Cartis et al. [Adaptive cubic regularisation methods for unconstrained optimization. Part I: motivation, convergence and numerical results, Mathematical Programming A 127 (2011), pp. 245–295]. Our purpose is to design a modified version of ARC in order to improve the computational efficiency preserving global convergence properties. The basic idea is to suitably combine a Goldstein-type line search and a nonmonotone accepting criterion with the aim of advantageously exploiting the possible good descent properties of the trial step computed as (approximate) minimizer of the cubic model. Global convergence properties of the proposed nonmonotone ARC algorithm are proved. Numerical experiments are performed and the obtained results clearly show satisfactory performance of the new algorithm when compared to the basic ARC algorithm.     

Storm water infiltration in a monitored green roof for hydrologic restoration

The objectives of this study are to provide detailed information about green roof performance in the Mediterranean climate (retained volume, peak flow reduction, runoff delay) and to identify a suitable modelling approach for describing the associated hydrologic response. Data collected during a 13-month monitoring campaign and a seasonal monitoring campaign (September-December 2008) at the green roof experimental site of the University of Genova (Italy) are presented together with results obtained in quantifying the green roof hydrologic performance. In order to examine the green roof hydrologic response, the SWMS_2D model, that solves the Richards' equation for two-dimensional saturated-unsaturated water flow, has been implemented. Modelling results confirm the suitability of the SWMS_2D model to properly describe the hydrologic response of the green roofs. The model adequately reproduces the hydrographs; furthermore, the predicted soil water content profile generally matches the observed values along a vertical profile where measurements are available.     

Speeding up the spatial adiabatic passage of matter waves in optical microtraps by optimal control

We numerically investigate the performance of atomic transport in optical microtraps via the so called spatial adiabatic passage technique. Our analysis is carried out by means of optimal control methods, which enable us to determine suitable transport control pulses. We investigate the ultimate limits of the optimal control in speeding up the transport process in a triple well configuration for both a single atomic wave packet and a Bose-Einstein condensate within a regime of experimental parameters achievable with current optical technology.