Numerical simulation of parallel-plate particle separator for estimation of charge distribution of PM2.5

A numerical simulation of an instrument that is used to measure the charging state of PM2.5 is conducted in order to clarify its measurement uncertainty and to improve its performance. The instrument, a parallel-plate particle separator (PPPS), is designed to classify aerosol particles according to their charging states and measure their quantities. The trajectories of submicron particles in the PPPS are numerically analyzed using the Lagrangian particle tracking method, taking into account the Brownian force and the electrostatic force. First, it is confirmed that the deterioration in the classification accuracy observed in the experiment is due to Brownian diffusion. The optimal condition that improves the accuracy is investigated through a parametric study by varying the balance of flow rates at the inlets, the geometry of the inlet and exit sections, and the applied voltage. It is found that decreasing the flow rate of the central inlet for aerosol or narrowing the central inlet improves the accuracy. The dependence of the accuracy on the flow rate is found to be in accordance with the experimental results. For charged particles, an optimum voltage that maximizes the classification accuracy is found. On the basis of the simulation results, we propose a method to determine the charge distribution of aerosol from the number of particles counted at each exit of the PPPS. In the test assuming aerosol in the air, the charge distribution determined from the number count at the exits is found to perfectly agree with the charge distribution specified at the inlet.

Copyright © 2019 American Association for Aerosol Research     

Negative emotion recognition using multimodal physiological signals for advanced driver assistance systems

Artificial Life and Robotics - Recent advanced driver assistance systems’ (ADASs) control cars to avoid accidents, but few of them consider driver’s comfort. To realize comfortable...     

Uniformity of gallium doped zinc oxide thin film prepared by pulsed laser deposition

Recently, transparent conducting oxide thin films have attracted attention for the application to transparent conducting electrodes. In this work, we evaluated the uniformity of electrical, optical and structural properties for gallium doped zinc oxide thin films prepared on the 10 × 10 cm² silica glass substrate by pulsed laser deposition. The resistivity, carrier concentration, mobility, bonding state and atomic composition of the film were uniform along in-plane and depth direction over the 10 × 10 cm² area of the substrate. The film showed the average transmittance of 81-87%, resistivity of 1.4 × 10^− 3 Ω cm, carrier concentration of 9.7 × 10²⁰/cm³ and mobility of 5 cm²/Vs in spite of the amorphous X-ray diffraction pattern. The gradual thickness distribution was found, however, the potential for large-area and low temperature deposition of transparent conducting oxide thin film using pulsed laser deposition method was confirmed.     

A master-slave control system for a semi-autonomous underwater vehicle-manipulator system

Underwater vehicle-manipulator systems (UVMS) are expected to play an important role in ocean exploration. It is considered that UVMS will be operated by both automatic and manual control. We have proposed an automatic control method. In this article, we propose a master-slave system for a UVMS. The effectiveness of the proposed master-slave control system is demonstrated by using a floating underwater robot with a 2-link manipulator.     

Epitaxial p-type SiC as a self-driven photocathode for water splitting

Solar-to-hydrogen conversion efficiencies of water-splitting photochathodes using epitaxially grown p-type 4H-, 6H- and 3C-SiC were estimated in a two-electrode system without applying any external bias. By using electrode materials with small oxygen overpotentials as counter electrodes, the photocurrent became comparable to that observed in a three-electrode system with a suitable bias. Estimated efficiencies seem to depend on the bandgap of the SiC polytypes. For the 3C-SiC, the obtained efficiency was 0.38%, which is so far the highest value reported for SiC. We confirmed that the hydrogen volumes estimated from the photocurrent were almost the same as actual volumes observed by gas chromatography.     

Preparation and mesostructure control of highly ordered zirconia particles having crystalline walls

Mesostructured zirconia particles having monoclinic-type crystalline walls were prepared using a low-temperature crystallization technique. Crystalline zirconia particles with highly-ordered mesostructures were obtained through the sol–gel process of zirconium sulfate tetrahydrate at 333 K in the presence of molecular self-assemblies of cetyltrimethylammonium bromide (CTAB) or mixtures of CTAB and anionic molecules such as sodium dodecyl sulfate and sodium p-toluenesulfonate. Variations in the molar ratios of CTAB and the chemical species of anionic molecules led to the variations in the periods of highly-ordered zirconia having crystalline walls. Calcination of the mesostructured zirconia particles prepared using templates consisting solely of CTAB yielded crystalline mesoporous zirconia particles.     

Preparation of Morphology‐Controlled Plate‐Like Sodium Niobate Particles by Hydrothermal Synthesis

Sodium niobate (NaNbO₃) particles with plate‐like morphology and hexagonal unit cells were prepared by the hydrothermal method. The result of SEM showed that the hexagonal NaNbO₃ were characterized by plate‐like morphology with a diameter of 5–15 μm and a thickness of 1–2 μm. The crucial influences on the morphology and crystal phase of the NaNbO₃, such as concentration of [OH^?], surfactant, and K⁺:Na⁺ ratio, were established. By further calcination treatment, the plate‐like hexagonal NaNbO₃ particles could be completely transformed into perovskite structure without morphology change. The XRD and EBSD results indicate that the major face of the calcined particles is parallel to the crystallographic (001)_pc (pseudo cubic index) plane. Compared with the traditional high‐temperature molten salt method, this work provides a simpler way to prepare the template for fabricating textured ceramics.     

Non‐cooperative game‐based packet ferry forwarding for sparse mobile wireless networks

In sparse mobile wireless networks, normally, the mobile nodes are carried by people, and the moving activity of nodes always happens in a specific area, which corresponds to some specific community. Between the isolated communities, there is no stable communication link. Therefore, it is difficult to ensure the effective packet transmission among communities, which leads to the higher packet delivery delay and lower successful delivery ratio. Recently, an additional ferry node was introduced to forward packets between the isolated communities. However, most of the existing algorithms are working on how to control the trajectory of only one ferry work in the network. In this paper, we consider multiple ferries working in the network scenario and put our main focus on the optimal packet selection strategy, under the condition of mutual influence between the ferries and the buffer limitation. We introduce a non‐cooperative Bayesian game to achieve the optimal packet selection strategy. By maximizing the individual income of a ferry, we optimize the network performance on packet delivery delay and successful delivery ratio. Simulation results show that our proposed packet selection strategy improves the network performance on packet delivery delay and successful delivery ratio. Copyright © 2013 John Wiley & Sons, Ltd.     

Blood Pressure Elevation of Tubular Specific (P)RR Transgenic Mice and Lethal Tubular Degeneration due to Possible Intracellular Interactions between (P)RR and Alternative Renin Products

The prorenin/renin receptor ((P)RR) is a multifunctional protein that is widely distributed in various organs. Despite intensive research for more than 20 years, this receptor has not been fully characterized. In this study, we generated mice overexpressing the tubular epithelial (P)RR gene ((P)RR-TG mice) to test the previously reported functional role of (P)RR by Ramkumar et al. in 2015 using tubular specific (P)RR KO mice. (P)RR-TG mice were maintained and analyzed in individual metabolic cages and were administered angiotensin II blocker (ARB), direct renin inhibitor (DRI), and bafilomycin, that is, vacuolar ATPase (V-ATPase) antagonist. (P)RR-TG mice were hypertensive and had alkalized urine with lower osmolality and Na⁺ excretion. ARB and DRI, but not bafilomycin, concurrently decreased blood pressure. Bafilomycin acidized urine of (P)RR-TG mice, or equivalently this phenomenon restored the effect of overexpressed transgene, suggesting that (P)RR functioned as a V-ATPase in renal tubules. Afterall, (P)RR-TG mice were mated with alternative renin transgenic mice (ARen2-TG), which we identified as intracellular renin previously, to generate double transgenic mice (DT-TG). Lethal renal tubular damage was observed in DT-TG mice, suggesting that intracellular renin may be a ligand for (P)RR in tubules. In summary, (P)RR did not substantially affect the tissue renin-angiotensin system (RAS) in our model of tubular specific (P)RR gene over-expression, but alternative intracellular renin may be involved in (P)RR signaling in addition to conventional V-ATPase function. Further investigations are warranted.