Elastic, anelastic, and piezoelectric coefficients of langasite: resonance ultrasound spectroscopy with laser-Doppler interferometry

This paper presents advanced techniques to determine all independent elastic-stiffness coefficients C/sub ij/, the associated internal friction Q/sub ij//sup -1/, and piezoelectric coefficients e/sub ij/ of monocrystal langasite (La/sub 3/Ga/sub 5/SiO/sub 14/) using a single rectangular parallelepiped specimen. Langasite's crystal structure belongs to the trigonal system with point group 32, and thus possesses six independent C/sub ij/, two e/sub ij/, and two dielectric coefficients /spl epsiv//sub ij/. All of the elastic and piezoelectric coefficients affect the mechanical resonance frequencies of the solid specimen, and measuring them very accurately permits one to determine the C/sub ij/ and e/sub ij/ with known density, dimensions, and e/sub ij/. We developed a piezoelectric tripod to support the specimen upward and measured the free-vibration resonance frequencies with minimum load from its own weight. This weak and stable acoustic coupling ensures accuracy of the frequency measurement better than 10/sup -5/, enough to determine the coefficients reliably. Our C/sub ij/ fall in the range of results measured with previous (conventional) methods. Our e/sub 11/ is smaller than the reported values by 1.2-13%, and e/sub 14/ is larger by 44-97%. For the internal friction measurement, we used a solenoid coil to vibrate the specimen without any contact. The longitudinal-wave internal friction considerably exceeds the shear-wave internal friction, which can be explained by phonon-phonon interactions.     

Deep Phenotyping of Superficial Epidermolytic Ichthyosis due to a Recurrent Mutation in KRT2

Superficial epidermolytic ichthyosis (SEI) is an autosomal dominant inherited ichthyosis. SEI is caused by mutations in KRT2 and frequently shows erythroderma and widespread blistering at birth. We report the clinical manifestations of two patients from a Japanese family with SEI caused by a hotspot mutation, p.Glu487Lys, in KRT2. In addition, we summarize previous reports on SEI patients with the identical mutation. One of the two patients had disease onset at the age of 7 months. The other patient’s age of onset is unknown, but it was in childhood. Neither of the two patients showed erythroderma. To perform deep phenotyping, we studied the age of onset and the frequency of erythroderma in 34 reported SEI cases with the p.Glu487Lys mutation, including the present cases. Among the cases with sufficient clinical information, 44.4% of the cases that were due to p.Glu487Lys in KRT2 occurred at birth. Erythroderma was observed in 11.1% of the cases with p.Glu487Lys in KRT2.     

Intermittent Hypoxia Increased the Expression of DBH and PNMT in Neuroblastoma Cells via MicroRNA-375-Mediated Mechanism

Sleep apnea syndrome (SAS), characterized by recurrent episodes of oxygen desaturation and reoxygenation (intermittent hypoxia (IH)), is a risk factor for hypertension and insulin resistance. We report a correlation between IH and insulin resistance/diabetes. However, the reason why hypertension is induced by IH is elusive. Here, we investigated the effect of IH on the expression of catecholamine-metabolizing enzymes using an in vitro IH system. Human and mouse neuroblastoma cells (NB-1 and Neuro-2a) were exposed to IH or normoxia for 24 h. Real-time RT-PCR revealed that IH significantly increased the mRNA levels of dopamine β-hydroxylase (DBH) and phenylethanolamine N-methyltransferase (PNMT) in both NB-1 and Neuro-2a. Western blot showed that the expression of DBH and PNMT in the NB-1 cells was significantly increased by IH. Reporter assays revealed that promoter activities of DBH and PNMT were not increased by IH. The miR-375 level of IH-treated cells was significantly decreased relative to that of normoxia-treated cells. The IH-induced up-regulation of DBH and PNMT was abolished by the introduction of the miR-375 mimic, but not by the control RNA. These results indicate that IH stress increases levels of DBH and PNMT via the inhibition of miR-375-mediated mRNA degradation, potentially playing a role in the emergence of hypertension in SAS patients.     

Uterine Deletion of Bmal1 Impairs Placental Vascularization and Induces Intrauterine Fetal Death in Mice

Recently, it was demonstrated that the expression of BMAL1 was decreased in the endometrium of women suffering from recurrent spontaneous abortion. To investigate the pathological roles of uterine clock genes during pregnancy, we produced conditional deletion of uterine Bmal1 (cKO) mice and found that cKO mice could receive embryo implantation but not sustain pregnancy. Gene ontology analysis of microarray suggested that uterine NK (uNK) cell function was suppressed in cKO mice. Histological examination revealed the poor formation of maternal vascular spaces in the placenta. In contrast to WT mice, uNK cells in the spongiotrophoblast layer, where maternal uNK cells are directly in contact with fetal trophoblast, hardly expressed an immunosuppressive NK marker, CD161, in cKO mice. By progesterone supplementation, pregnancy could be sustained until the end of pregnancy in some cKO mice. Although this treatment did not improve the structural abnormalities of the placenta, it recruited CD161-positive NK cells into the spongiotrophoblast layer in cKO mice. These findings indicate that the uterine clock system may be critical for pregnancy maintenance after embryo implantation.     

Spectral restoration and energy resolution improvement of electron energy-loss spectra by Pixon reconstruction: II. Application to practical ELNES analysis of low SNR

We applied Pixon deconvolution as introduced in Part I to several practical, examples of low signal-to-noise ratio (SNR), electron energy-loss spectra with a goal toward restoring their fine spectral features and/or improving the energy resolution. We demonstrate that by directly fitting the two-dimensional spectral data recorded on the CCD; the method enables us to reveal fine spectral structures. Consequently, Pixon reconstruction extends the ability to probe electronic states in very spatially localized areas, a capability currently unique to our method.     

玻璃纤维/大麻纤维增强聚丙烯混杂复合材料的力学性能和断裂特征(英文)

目前在土木工程,建筑,汽车等领域里使用的复合材料中,玻璃纤维是用量最大的增强材料。由于保护地球环境的呼声日趋高涨,天然纤维被期待着代替源于石油而且再利用困难的玻璃纤维,成为绿色复合材料的必要材料之一。本文通过注射成型工艺制作了玻璃短纤维,大麻短纤维以及混杂型纤维增强复合材料,并在拉伸实验中应用两种不同频率的声发射技术检测了拉伸断裂特性。实验发现,随着大麻纤维的加入和混杂复合材料绿色度的增加,复合材料的拉伸弹性模量随之线性增大,而拉伸强度基本保持不变。当大麻纤维的含量超过20wt%的时候,拉伸强度开始降低。在不同频率的声发射实验中,混杂型复合材料的声发射事件的产生都比单一纤维增强型复合材料要来的晚,也就是说,纤维的混杂有助于推迟微裂纹的产生。     

Rapid In Situ Synthesis of Spherical Microflower Pt/C Catalyst Via Spray‐drying for High Performance Fuel Cell Application

A facile route for the rapid in situ synthesis of platinum nanoparticles on spherical microflower carbon has been developed. An aqueous precursor slurry containing carbon black, polystyrene latex (PSL), polyvinyl alcohol, and platinum salt was spray‐dried, followed by calcination to simultaneously reduce platinum salt and to decompose PSL particles. Prepared Pt/C catalyst showed high‐performance electrocatalytic activity with excellent durability. The mass activity and specific activity values were 132.26 mA mg^–1 Pt and 207.62 μA cm^–2 Pt, respectively. This work presents a future direction for the production of high‐performance Pt/C catalyst in an industrial scale.     

Characterization of a Silk‐Resinified Compact Fabricated Using a Pulse‐Energizing Sintering Device

Pulse electric current sintering is used to prepare a compact from resinificated hydrous silk powder. Compacts with no remnant silk powders are formed with 20 wt% added water, 20–40 MPa molding pressure, and >353 K molding temperature. The latter two are much lower than those used for conventional hot pressing. No dependence on molding pressure and temperature are found in XRD or FT‐IR analysis, except for a compact molded at 473 K, for which silk fibroin decomposition is confirmed by DSC, EGA‐MS, and molecular weight measurements. The compact's three‐point bending strength depends on the molding temperature, except for the temperature at which silk fibroin decomposes. The maximum three‐point bending strength resembles that of general‐purpose epoxy resin and is much higher than that of PLA.