Simulation of Strength Distribution in Ground Ceramics by Incorporating Residual Stress Effect

Strength of ground ceramics may be affected by residual stress as well as surface flaws induced by grinding. Strength prediction for ground ceramics is convenient for mechanical design of ceramic components. In this article, a numerical procedure based on fracture mechanics was proposed to estimate strength distribution of ground ceramics by considering grinding-induced residual stress. Bending strength and residual stress of ground ceramics were measured for three grinding-conditions. By comparison of simulated results with experimental ones, it was revealed that strength characteristics in experiments were well simulated by using the proposed procedure.     

Evaluation of hydrological processes in a mountainous small basin using a quinone biomarker.

An applicability of quinone biomarker to the analysis of hillslope runoff was investigated. At first, quinone profiles of three streams as well as a hillslope runoff in a forested headwater catchment were compared. The quinone composition of hillslope runoff differed from others. Moreover, there were remarkable differences in quinone profile of hillslope runoff under different rainfall conditions. Then, the behavior of quinone biomarker during the increase and decrease of hillslope runoff after a rainfall event was examined. The fractional changes in Q-9 (H2), Q-10 (H2), Q-11, MK-6 and MK-10 suggested the effect of interflow.     

Photoresponsive peptide and polypeptide systems: part II. Photochromism of poly(l-ornithine) containing various azo-contents in side chains

Poly(L-ornithine)s having various azo-contents in the side chains were synthesized by the water-soluble carbodiimide procedure. The photochemical properties of the polypeptides poly[N^δ-p-(phenylazo)benzoyl-L-ornithine] (PPABLO) containing 3–77 mol% azobenzene were investigated by absorption and circular dichroism spectroscopy in hexafluoro-2-propanol (HFIP) or water, and in HFIP-water or methanol-water solvent mixtures. The photochromism of the dichroic bands of the PPABLOs containing 20–77 mol% azobenzene in the visible and ultraviolet wavelength regions was found to be mostly reversible as a function of irradiation time at different wavelengths due to the photostationary state (above 80% trans-cis photoisomerization) of the azo aromatic moieties. The PPABLO containing 3.2 mol% azobenzene in water exhibited conformational changes from random coil to helix by the addition of methanol or sodium dodecyl sulphate (SDS). The photo-induced conformational change was observed in HFIP-water-SDS solvent mixtures, while no conformational change was seen in water and HFIP-water solvent mixtures.     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

Neutron Stress Measurement of W‐Fiber Reinforced Cu Composite

Stress measurement methods using neutron and X‐ray diffraction were examined by comparing the surface stresses with internal stresses in the continuous tungsten‐fiber reinforced copper‐matrix composite. Surface stresses were measured by X‐ray stress measurement with the sin²ψ method. Furthermore, the sin²ψ method and the most common triaxal measurement method using Hooke's equation were employed for internal stress measurement by neutron diffraction. On the other hand, microstress distributions developed by the difference in the thermal expansion coefficients between these two phases were calculated by FEM. The weighted average strains and stresses were compared with the experimental results. The FEM results agreed with the experimental results qualitatively and confirmed the importance of the triaxial stress analysis in the neutron stress measurement.     

Optical data storage by novel photoelectrochromic polymer

A novel elastic polymer containing 4,4′-bipyridinium salts with tetrakis[3,5-bis(trifluoromethyl)phenyl]borate as part of the main chain was synthesized. The cast film showed persistent and reversible colour changes due to photoinduced electron transfer upon excitation of an ion-pair charge-transfer band (_ex >365 nm) in vacuo. The lifetime of the coloured state markedly depended on temperature. The optically written data were stored without decay below 0°C and were erased thermally at elevated temperatures. The colour changes were reversibly repeatable for many times.     

Isotachophoretic analysis of surfactants

The qualitative and quantitative determination of anionic surfactants (sodium and lithium alkylsulfate, sodium dodecylbenzenesulfonate, sodium di-2-ethylhexyl sulfosuccinate, sodium and lithium perfluoroalkylcarboxylate, and lithium perfluorooctanesulfonate) were investigated by a capillary tube isotachophoresis using a potential gradient detector. The leading electrolyte solution was the mixture of acetonitrile and aqueous solution of histidine buffer containing calcium chloride. The terminating electrolyte solution was the aqueous solution of sodium octanoate. These electrolytes were effective for the analysis of the mixtures of strongly acidic surfactants.     

Crack-wake shielding and small-scale crack-tip yielding as potential mechanisms for improving the delayed-failure resistance of silicon nitride at elevated temperatures

Requirements and microstructural design criteria for employing silicon nitride in long-term structural applications at elevated temperatures are discussed according to fracture mechanics concepts. Three least engineering parameters are considered: lifetime, flaw-tolerance and deformation under stress. “Ductile” materials are found by exploitation of small-scale crack-tip yielding which arises from the softening of their grain-boundary phase. These materials, however, are likely to exhibit poor deformation resistance. Materials with a “strong” grain boundary generally show a superior deformation behaviour but are liable to brittle fracture and static-fatigue strength degradation unless shielding mechanisms in the crack-wake be operative. The present analysis evaluates and compares these two classes of materials and the respective approaches commonly followed for their densification.     

Antioxidizing component,musizin, inrumex japonicus houtt

A substance with antioxidant properties was obtained from the hexane extract of roots ofRumex japonicus Houtt. The active component of the hexane extract was isolated and characterized as 2-acetyl-1,8-dihydroxy-3-methyl naphthalene, trivially named musizin (MUS). The antioxidant activities of MUS in six types of fats and oils were higher than that of butyl hydroxyanisole (BHA) and δ-tocopherol (δ-TOC). Together, TOC and MUS have a synergistic effect, because comparable amounts of either had lower antioxidant activity than various combinations of the two antioxidants. When we studied the antioxidant properties of a mixture of MUS and δ-TOC with methyl linoleate (MeLH), we found that the rates of destruction of the two antioxidants were comparable, but that their destruction occurred sequentially, with MUS first followed by δ-TOC, after which the oxidation of MeLH quickly occurred. Comparison of the antioxidant activity of MUS and its analogs suggests that only one of the two hydroxyl groups in MUS is involved in its antioxidant activit. Intermolecular hydrogen bonding may be involved.