Preparation and structure of poly(vinyl alcohol)–poly(vinyl acetate) composite porous membrane

The preparation of poly(vinyl alcohol) (PVA)–poly(vinyl acetate) (PVAc) composite porous membrane was investigated by extracting PVAc with solvent from films of PVAc lattices which were obtained by the emulsion polymerization of vinyl acetate (VAc) in the presence of PVA. The formation of the porous membrane depended upon whether or not PVAc in the latex film was easily extracted with solvent. In the case of using hydrogen peroxide (HPO)–tartaric acid (TA) as an initiator, in the film of the latex which was produced from the batch method in which all ingredients of the batch were put into the reaction vessel before starting polymerization, PVAc could be extracted over 90% of total PVAc with common organic solvents. In the film of the latex which was produced from the dropwise addition method of VAc and initiator, the PVAc extraction was about 20-30%. On the other hand, in the case of using ammonium persulfate as an initiator, the desired porous membrane was not obtained. The structure of the porous membrane obtained from the latex of the batch method by using HPO—TA consisted of spherical cells which were made up of PVA and grafted PVAc or insoluble PVAc like microgels, which were not extracted with organic solvent and were connected by small pores. The PVA—PVAc composite porous membrane is permeated by n-hexane with 5.58 × 10² mL/cm²·s at 0.5 kg/cm², by benzene with only 1.33 × 10^?3mL/cm²·s even at 60 kg/cm².     

Iodine reaction of vinyl acetate/vinyl propionate copolymers. III. Iodine affinities of the radically polymerized copolymers and the copolymers derived from partially saponified polyvinyl acetate

The minimum sequence lengths (n_c) of vinyl acetate (VAc) units necessary to form a colored iodine complex were determined to be 4 and 17 for radically polymerized VAc/vinyl propionate (VPr) and VAc/isopropenyl acetate (IPAc) copolymers, respectively. The iodine affinities (I/VAc) of VAc/VPr copolymers (SP-series) obtained by propionylation of partially saponified polyvinyl acetate (PVAc) were remarkably affected by the saponification conditions. An increase of the water content in acetone/water mixture as saponification solvent brought about a decrease of the iodine affinities of the SP-series. The dependence of the iodine affinity on the saponification of monomer units in the SP-series was compared with that in the radically polymerized VAc/VPr copolymers by taking the sequence probability as the measure of monomer unit distribution. The results strongly supported an occurence of the slide fastener reaction at high degrees of saponification, which was well-known in the saponification of PVAc. Furthermore, it was found that the saponification mode of PVAc at low degrees of saponification was influenced uniquely by the water content in saponification solvents and the saponification temperature.     

Anodic polarization of aluminium in organic electrolytes

The polarization characteristics of aluminium anodes have been studied in various organic electrolytes containing aluminium chloride. The small amount of oxide present on the metal was dissolved by an anodic pre-treatment. The charge transfer number of the overall reaction was three. The current density supported by the electrolytes decreased in the order nitromethane>acetonitrile >propylene carbonate, formamide>tetrahydrofuran. The rest potential increased in the order formamide     

Pyrolysis–molecular weight chromatography–vapor-phase infrared spectrophotometry: An on-line system for analysis of polymers. IV. Influence of cis/trans ratio on the thermal degradation of 1,4-polybutadienes

The influence of the cis/trans ratio of 1,4-polybutadienes on the volatile products formed during temperature-programmed thermal degradation to 15% weight loss has been investigated using a mass chromatograph (a gas chromatograph which directly provides mass numbers of resolved components of a mixture) and an “on the fly” vapor-phase infrared spectrophotometer. In order of amounts, major volatile products were 4-vinyl-1-cyclohexene (dimer), 1,3-butadiene (monomer), cyclopentene, and 1,3-cyclohexadiene. With increasing trans content, the relative quantities of 4-vinyl-1-cyclohexene decreased strongly, cyclopentene increased strongly, 1,3-butadiene decreased moderately, and 1,3-cyclohexadiene increased moderately. For a high-trans polybutadiene, increasing the heating rate produced relatively more monomer and dimer but less cyclopentene. Mass chromatograms from 1,4-polybutadienes which had been heated to 15% weight loss in their prehistory were similar to those obtained from 1,2-polybutadiene, indicating that 1,4-polybutadiene undergoes isomerization prior to degradation. Mechanisms for the formation of the main volatile products of decomposition are discussed.     

Orientation space filtering for multiple orientation linesegmentation

The goal of this paper is to present an appropriate method for the segmentation of lines at intersections (X-junctions) and branches (T-junctions), which can be regarded as local regions where lines occur at multiple orientations. A novel representation called “orientation space” is proposed, which is derived by adding the orientation axis to the abscissa and the ordinate of the image. The orientation space representation is constructed by treating the orientation parameter, to which Gabor filters can be tuned, as a continuous variable. The problem of segmenting lines at multiple orientations is dealt with by thresholding 3D images in the orientation space and then detecting the connected components therein. In this way, X-junctions and T-junctions can be separated effectively. Curve grouping can also be accomplished. The segmentation of mathematically modeled X-, T-, and L-junctions is demonstrated and analyzed. The sensitivity limits of the method are also discussed. Experimental results using both synthesized and real images show the method to be effective for junction segmentation and curve grouping     

Global adaptive stabilization of infinite-dimensional systems

The purpose of this paper is to show that a first-order adaptive regulator globally stabilizes a class of infinite-dimensional systems having no right half plane zeros. Knowledge of the spectrum of the model's high-frequency gain is not required.     

Bile Acid–Drug Interaction via Organic Anion-Transporting Polypeptide 4C1 Is a Potential Mechanism of Altered Pharmacokinetics of Renally Excreted Drugs

Patients with liver diseases not only experience the adverse effects of liver-metabolized drugs, but also the unexpected adverse effects of renally excreted drugs. Bile acids alter the expression of renal drug transporters, however, the direct effects of bile acids on drug transport remain unknown. Renal drug transporter organic anion-transporting polypeptide 4C1 (OATP4C1) was reported to be inhibited by chenodeoxycholic acid. Therefore, we predicted that the inhibition of OATP4C1-mediated transport by bile acids might be a potential mechanism for the altered pharmacokinetics of renally excreted drugs. We screened 45 types of bile acids and calculated the IC₅₀, K_i values, and bile acid–drug interaction (BDI) indices of bile acids whose inhibitory effect on OATP4C1 was >50%. From the screening results, lithocholic acid (LCA), glycine-conjugated lithocholic acid (GLCA), and taurine-conjugated lithocholic acid (TLCA) were newly identified as inhibitors of OATP4C1. Since the BDI index of LCA was 0.278, LCA is likely to inhibit OATP4C1-mediated transport in clinical settings. Our findings suggest that dose adjustment of renally excreted drugs may be required in patients with renal failure as well as in patients with hepatic failure. We believe that our findings provide essential information for drug development and safe drug treatment in clinics.