Markedly compressible behaviors of gellan hydrogels in a constrained geometry at ultraslow strain rates

The fracture behaviors of gellan hydrogels under compression remarkably depend on the strain rate as well as the boundary conditions for lateral expansion. In the geometry with no constraint for lateral expansion (conventional uniaxial compression), the gels rupture at relatively small strains independently of the compression rates. In contrast, when the gels are compressed extremely slowly (at a strain rate of ca. 10⁻⁵ s⁻¹) in the geometry prohibiting the lateral expansion at their top and bottom surfaces, they are remarkably compressible down to 2% of the initial height without macroscopic fracture and they are accompanied by a large amount of water release. In such markedly compressed gels, many microscopic cracks are formed around the central layer, where strain concentration occurs due to the nonuniform deformation arising from the constrained geometry. In the highly compressible case, the formation of macroscopic cracks is prevented by the localization of microscopic cracks as well as the enhancement in mechanical toughness by a significant increase in polymer concentration due to water release.     

Application of gene gun for local-regional cancer

We studied the in vivo gene transfusion using a gene gun, formerly used in plants and culture cells. The hand-held type gene gun (Helios Gene Gun System) is simple and convenient for effective gene transfection in living animals. This method has some advantages in that there is no need for use of viral vector, independence on the cell cycle and local inducement of plural genes. There is a great possibility for application to local-regional cancer.     

Development of next generation PWR in Japan

The demand for energy in Japan is expected to increase steadily into the future, and it seems that the importance of nuclear power generation will be heightened more when the situation of our country which is not rich in energy resources is taken into account.

Furthermore, when we consider the present situation that the light water reactors have become common, recent outlook for the supply and demand for uranium resources, trends in the development of the fast breeder reactor technology, etc., the light water reactors are expected to remain dominant in the nuclear power generation of our country until at least the second half of the 21st century.

Based on such a background five PWR utilities in Japan (Hokkaido, Kansai, Shikoku, Kyushu, and the Japan Atomic Power), and Mitsubishi Heavy Industries, Ltd. have jointly started researching the Next Generation PWR which is expected to be the leading nuclear power plant taking place of APWR.     

Does mixed venous desaturation during a bed bath indicate cardiopulmonary decompensation in postoperative cardiac patients?]

The bed bath procedure consists of cleansing patients' body, passive position change, changing gown and making a bed. During the procedure, mixed venous desaturation was observed consistently in postoperative cardiac patients. We investigated the cause of the phenomenon in 22 patients undergoing cardiac surgery in their first postoperative day. The patients were breathing oxygen-enriched air via a Venturi mask. Cardiac index (CI), transluminal SvO2, arterial blood gas, Hb, DO2, VO2, FIO2, A-aDO2 and Qp/Qs were measured before and during the bed bath, while the patients were in the supine and left lateral position, respectively. Mean 8.5 +/- 1.5 minutes were required to complete the bed bath. During the bed bath, SvO2 decreased from 71 +/- 7% to 59 +/- 9% (P < 0.001), and returned to the baseline 6.5 +/- 7.4 minutes after the completion of the bed bath. VO2 increased markedly from 128 +/- 27 to 194 +/- 47 ml.min-1.m-2 (P < 0.001), while DO2 increased slightly from 480 +/- 91 to 513 +/- 110 ml.min-1.m-2 (P < 0.05). Among the determinants of DO2, CI increased slightly from 3.3 +/- 0.6 to 3.6 +/- 0.8 l.min-1.m-2, Hb remained unchanged and SaO2 decreased from 98.5 +/- 0.8 to 98.0 +/- 1.1%. FIO2 also decreased, while A-aDO2 and Qp/Qs remained unchanged. There was a negative correlation between VO2 change and SvO2 change, but no correlation between DO2 change and SvO2 change. There was a positive correlation between SaO2 change and SvO2 change, as well as between FIO2 change and SaO2 change. Therefore, the major cause of mixed venous desaturation was not the decreased DO2 or cardiopulmonary decompensation but the increased VO2 due to increased activity of the skeletal muscles. However, the decrease in SaO2 due to markedly increased O2 demand and the limited increase in CI might partially contribute to the marked decline in SvO2 through the limited increase in DO2.     

Slit flow of molten polyethylene filled with plastic flakes

The processability of polyethylene in sheet-extrusion or calendering may be improved by the addition of plastic flakes. The effects of plastic flake parameters and flow conditions on the viscosity and the die swell of the suspension were determined, and the structure in flow (morphology or dispersion state) and applications were discussed. Flakes of biaxially oriented polystyrene, high-impact polystyrene, polypropylene, polyamide or polypropylene spheres were dry-blended with polyethylene. The viscosity was determined by means of a slit or a capillary rheometer. The quenched extrudate was annealed and its die swell was measured. Flakes of biaxially oriented polystyrene shrunk into rod-like form during heating, but other plastics retained the flake-form. The relative viscosity and the swell ratio of the suspensions depended on the type of plastic and operating conditions. The rheological behavior of suspensions qualitatively suggested that polypropylene flakes deformed or crowded (including stacking), polyamide flakes deformed slightly, and polystyrene flakes were difficult to buckle, but crowded slightly. The thickness of extrudates can be controlled easily by flake addition due to decreased die swell, while the output would be reduced to some extent.     

Properties of networks obtained by internal plasticization of epoxy resin with aromatic and aliphatic glycidyl compounds

In order to improve the fracture properties of p, p′-diaminodiphenylmethane-cured epoxy resin, various kinds of aromatic and aliphatic glycidyl compounds were investigated as a modifier at an amount of 30 wt %. Several compounds promoted the fracture toughness. In any glycidyl compounds, however, heat resistance was decreased by the modification. The dynamic mechanical properties of the modified epoxy resins were measured. The crosslinking density ρ was calculated from the theory of rubber elasticity, and the mechanical properties of the resins were discussed in regard to the crosslinking density. Tensile strength was scarcely affected by the crosslinking density. Elongation at break and Izod impact strength increased remarkably with decrease in crosslinking density. The fracture toughness K_Ic- increased with decrease in crosslinking density except at small ρ.     

Rinsing effect of alkaline electrolyzed water on nickel surfaces

The improvement in the surface cleanliness of electroplated nickel by rinsing in alkaline electrolyzed water (AEW) was determined. When the nickel plated sample was rinsed with the AEW, it was found that the amount of residual sulfate ion on the surface of a sample decreased approximately by half compared to one rinsed only with de-ionized pure water. Because nanosize hydrogen bubbles are present in the AEW, and the zeta-potential has a negative value, we then surmised that the mechanism of rinsing was as follows: The sulfate ions are selectively absorbed on the nanosize colloidal hydrogen bubbles, or substituted for anions absorbed on the hydrogen bubbles. The sulfate ions absorbed on the nickel surface then become detached. The detached sulfate ions are absorbed on the surface of the hydrogen bubbles, and negatively charge the hydrogen bubbles. It can be considered that any detached sulfate ions do not re-adhere due to the electrical repulsion force of the negatively charged nickel surface. Thus the sample is efficiently rinsed.     

Soluble and colorless polyimides with polyalicyclic structures [1]

Two tetracarboxylic dianhydrides with polyalicyclic structure, bicyclo[2.2.2]octane-2-endo, 3-endo, 5-exo, 6-exo-2,3:5,6-dianhydride (5a) and the all-exo isomer (5b), were synthesized in six steps using phthalic acid as a starting material. The dianhydrides were polymerized at 85–105°C in well-purified DMAc with aromatic diamines which were purified by two recrystallizations and then sublimation. The polyimides formed flexible and tough films, and were soluble in aprotic polar solvents such as DMAc. The 5%-weight loss temperatures were over 450°C. The polyimides possessed glass-transition temperatures in the range from 211 to 385°C. The polyimides films had a tensile modulus range of 1.5–2.6 GPa, a tensile strength range of 52–96 MPa, and an elongation range at break of 3–11%. The polyimide films showed cutoffs at wavelengths shorter than 320 nm and were entirely colorless. The colorlessness of the polyimide films was maintained up to 200°C when heated in air and to 400°C in a N₂ atmosphere.     

Shape from Shading with Interreflections Under a Proximal Light Source: Distortion-Free Copying of an Unfolded Book

We address the problem of recovering the 3D shape of an unfolded book surface from the shading information in a scanner image. This shape-from-shading problem in a real world environment is made difficult by a proximal, moving light source, interreflections, specular reflections, and a nonuniform albedo distribution. Taking all these factors into account, we formulate the problem as an iterative, non-linear optimization problem. Piecewise polynomial models of the 3D shape and albedo distribution are introduced to efficiently and stably compute the shape in practice. Finally, we propose a method to restore the distorted scanner image based on the reconstructed 3D shape. The image restoration experiments for real book surfaces demonstrate that much of the geometric and photometric distortions are removed by our method.