Thermo-oxidative degradation of some polymer couples containing HNBR

Summary In this paper thermal behavior of some HNBR blends with CPE, PVC, CR and NBR at three temperatures, 150, 170 and 190°C is presented. Changes in characteristic IR bands, gel fraction, and chlorine content were assessed. Some mechanistic differences between the studied systems, regarding the involvement the depletion of chlorine and modification in gel content, were pointed out. Cyclization of nitrile structure was also observed by means of 2240 cm⁻¹ band ascribed to >C=NH. Kinetic considerations are presented. Received: 3 June 2002/Revised version: 14 November 2002/ Accepted 20 November 2002 Correspondence to Traian Zaharescu     

Comparative Study of 9×19 mm Ammunition Combustion Products and Residues

During the last decades, authorities’ awareness on environmental and human health impact at national and international level has increased in the field of small arms ammunition containing lead and antimony. Thus, the evolution of environmental policies regarding production and use of heavy metals and their compounds, especially in EU countries, implied extensive studies on the environmental implications of 9×19 mm caliber ammunition use, especially in indoor shooting ranges. In this context, the paper describes the experimental studies performed on Pb‐containing conventional FMJ (full metal jacketed) ammunition and comparative measurements on new ammunition designed for training. The combustion products and residues from conventional Pb‐containing ammunition and Cu‐based “greener” ammunition were compared in terms of gaseous products, metal concentration in aerosols and metal concentrations in solid residues. Gas emissions and solid residues were measured for four different types of ammunitions. The results showed that the copper content of the residue is significantly higher in case of Cu‐containing composite bullets. For the ammunition equipped with Pb bullet, an important percentage of the Pb residue is generated by erosion of the exposed part of the bullet core. On the other hand, the ammunition containing Cu‐composite bullet generates large quantities of Cu residues, which have similar environmental impact and less impact on human health. Gas analysis indicated the presence of CO and NO_x and, surprisingly, high concentrations of HCN, CH₄, and NH₃. Lower gas concentrations are obtained for the composite bullets due to an incomplete combustion of gun propellant.     

Synthesis,structural and morphological characteristics,magnetic and optical properties of Co doped ZnO nanoparticles

Zn_1−xCo_xO (x==0.05, 0.10, 0.15) nanoparticles have been synthesized by an alternative wet-chemical synthesis route using the SimAdd technique. The as-obtained powders were investigated by FT-IR spectroscopy, X-ray diffraction and thermal analysis correlated with evolved gas analysis (TG–DTA–FT-IR) in order to determine their chemical nature, crystalline structure and to establish the decomposition sequences. The precipitates are generally amorphous, but low-intensity reflection peaks assigned both to the zinc oxalate dihydrate, and zinc hydroxide can be observed in the recorded patterns, indicating that hydroxy-oxalate precipitates were obtained. The structure, morphology and magnetic properties of the thermally treated samples have been investigated by X-ray diffraction, FT-IR, HRTEM, SAED, UV–vis and EPR. XRD studies reveal a hexagonal wurtzite-type structure for all Zn_1−xCo_xO samples. TEM investigations show particle size between 28 and 37 nm, with spherical and polyhedral shapes and with tendency to form aggregates. The presence of a Co₃O₄ secondary phase was evidenced by XRD, UV–vis and EPR for the Zn_0.85Co_0.15O sample. The ferromagnetic behavior of the samples was revealed. The paper highlights that by varying the cobalt concentration it is possible to modulate the structural, morphological, optical and magnetic properties.     

Concentration influences on recovery in a high gradient magneticseparation axial filter

The buildup differential equations for the case of a single wire in high gradient magnetic filtration (HGMF)-axial configuration taking into account the suspension concentration are solved. A new equation for the deposit contour surface at different moments and for different suspension concentrations are obtained. The existence of a particulate suspension concentration, for which the radial extension velocity of deposit is maximum, is evidenced. The recovery for an ordered ferromagnetic matrix is calculated. The influence of the solid particle concentration from suspension on the filtration efficiency is presented     

Parallel implementation of the biorthogonal multiresolution time-domain method

The three-dimensional biorthogonal multiresolution time-domain (Bi-MRTD) method is presented for both free-space and half-space scattering problems. The perfectly matched layer (PML) is used as an absorbing boundary condition. It has been shown that improved numerical-dispersion properties can be obtained with the use of smooth, compactly supported wavelet functions as the basis, whereas we employ the Cohen-Daubechies-Fouveau (CDF) biorthogonal wavelets. When a CDF-wavelet expansion is used, the spatial-sampling rate can be reduced considerably compared with that of the conventional finite-difference time-domain (FDTD) method, implying that larger targets can be simulated without sacrificing accuracy. We implement the Bi-MRTD on a cluster of allocated-memory machines, using the message-passing interface (MPI), such that very large targets can be modeled. Numerical results are compared with analytical ones and with those obtained by use of the traditional FDTD method.     

Texture anisotropy technique in brain degenerative diseases

Structural alterations anisotropy-based measured for different areas for the most common types of dementia diseases could be a biomarker of brain impairment. The current work aims to assess whether texture anisotropy can discriminate both healthy versus Alzheimer’s and Pick’s patients based on regional evaluation while maintaining high predictive power. The investigated area is reduced from the whole-brain surface to three major lobes (i.e., frontal, temporal and parietal). A predictive model was proposed to associate a disease with a specific area in the brain based on the anisotropy values. Simultaneous analysis of 1680 measurements from 105 brain magnetic resonance images acquired as T2w and PD sequences was performed to establish the significance of the model. The cerebral calcinosis disease has been used as artificial ground truth. The association based on textural anisotropy between targeted diseases and control patients was performed by using Pearson’s correlation coefficients. A new proposed consistency index investigated the texture anisotropy relevance for all image’s types and all analyzed classes and regions. The validation study is based on area under the receiver-operating characteristic curve that depicted the overall diagnostic performance of the texture anisotropy in each region. The proposed model demonstrated that texture anisotropy is accurate solution in diagnosis of Alzheimer’s and Pick’s diseases when the investigated area is reduced to major lobes, with sensitivity >90% and specificity >80%.

     

Ablation of poly(2-hydroxyethyl methacrylate) by 193-nm excimer laser radiation

Data on the ablation of poly(2-hydroxyethyl methacrylate) (PHEMA) by 193-nm radiation pulses, produced by an ArF excimer laser, are presented for the first time and are compared with the data for poly(methyl methacrylate) (PMMA). The ablation rate of PHEMA is lower than that of PMMA and some possible explanations are advanced. The other features of the etch curves are similar and confirm a predicted ablative behavior of the addition polymers susceptible to depolymerization. Geometric aspects of the ablated polymer's surface, and the influence of inhomogeneities in the material, are also presented and discussed.     

Effect of multipurpose solutions for contact lens care on the in vitro drug-induced spoliation of poly(2-hydroxyethyl methacrylate) in simulated aqueous humour.

Drug-induced spoliation of hydrogels as contact lenses or as implants in the anterior eye is a frequent occurrence in clinical practice. This study explores the capacity of three commercial multipurpose solutions for contact lens care to reduce the spoliation of poly(2-hydroxyethyl methacrylate) (PHEMA) specimens exposed to a simulated aqueous humour formulation and to three topical drugs commonly administered after insertion of artificial corneas (Predsol, Optimol and Depo-Ralovera). ReNu MultiPlus (Bausch & Lomb), Complete Blink-N-Cleantrade mark Lens Drops (Allergan) and Complete Protein Remover Tablets dissolved in Complete ComfortPLUS (both from Allergan) were evaluated. All multipurpose solutions were able to dislodge passively the deposits formed on hydrogels in the simulated aqueous and in the presence of Predsol and Optimol, but none were effective against the deposits induced by Depo-Ralovera. A reduction of the calcium content in deposits caused by Predsol and Optimol was confirmed after treatment with the protein remover preparation, while the other multipurpose solutions caused the complete removal of the deposits. In experiments designed to evaluate the preventive action of the multipurpose solutions, no such effects were observed regardless of the drug involved. The prospect of using multipurpose solutions as eye drops following implantation of a hydrogel artificial cornea is a valid alternative for reducing device spoliation, however it appears to depend on the nature of the postoperative medication.