A comparative life cycle assessment of hybrid osmotic dilution desalination and established seawater desalination and wastewater reclamation processes

The purpose of this study was to determine the comparative environmental impacts of coupled seawater desalination and water reclamation using a novel hybrid system that consist of an osmotically driven membrane process and established membrane desalination technologies. A comparative life cycle assessment methodology was used to differentiate between a novel hybrid process consisting of forward osmosis (FO) operated in osmotic dilution (ODN) mode and seawater reverse osmosis (SWRO), and two other processes: a stand alone conventional SWRO desalination system, and a combined SWRO and dual barrier impaired water purification system consisting of nanofiltration followed by reverse osmosis. Each process was evaluated using ten baseline impact categories. It was demonstrated that from a life cycle perspective two hurdles exist to further development of the ODN-SWRO process: module design of FO membranes and cleaning intensity of the FO membranes. System optimization analysis revealed that doubling FO membrane packing density, tripling FO membrane permeability, and optimizing system operation, all of which are technically feasible at the time of this publication, could reduce the environmental impact of the hybrid ODN-SWRO process compared to SWRO by more than 25%; yet, novel hybrid nanofiltration-RO treatment of seawater and wastewater can achieve almost similar levels of environmental impact.     

Bidirectional permeation of electrolytes in osmotically driven membrane processes

Osmotically driven membrane processes (ODMP) are emerging water treatment and energy conversion technologies. In this work, we investigated the simultaneous forward and reverse (i.e., bidirectional) solute fluxes that occur in ODMP. Numerous experiments were conducted using ternary systems (i.e., systems containing three distinct ions) and quaternary systems (i.e., systems containing four distinct ions) in conjunction with a membrane in a forward osmosis orientation. Ten different combinations of strong electrolyte salts constitute the ternary systems; common anion systems studied included KCl-NaCl, KBr-NaBr, KNO(3)-NaNO(3), KCl-CaCl(2), and KCl-SrCl(2); and common cation systems explored were KCl-KH(2)PO(4), NaCl-NaClO(4), NaCl-Na(2)SO(4), NaCl-NaNO(3), and CaCl(2)-Ca(NO(3))(2). For each combination, two experiments were conducted with each salt being used once in the draw solution and once in the feed solution. Quaternary systems studied were NaCl-KNO(3), NaCl-MgSO(4), MgSO(4)-KNO(3), and NaCl-K(2)SO(4). Experimental fluxes of the individual ions were quantified and compared to a set of equations developed to predict bidirectional electrolyte permeation for ODMP in a forward osmosis orientation. Results demonstrate that ion fluxes from the draw solution to the feed solution are well predicted; however, ion fluxes from the feed solution to the draw solution show slight deviations from the model that can be rationalized in terms of the electrostatic interactions between charged ions. The model poorly predicts the flux of nitrate containing solutions; however, several unique mass transfer mechanisms are observed with implications for ODMP process design.     

Advanced Technologies for Engineering Tissue Mimetics

Micro- and nanotechnologies have become central to fields ranging from tissue and cellular biophysics to regenerative medicine toward the creation of more complex and progressive tissues. In this article, we overview some of the new technological concepts in this field for recapitulating the native extracellular matrix, designing dynamic microenvironments, and the incorporation of small-scale devices for actuating and monitoring engineered tissue performances.     

Removal of natural steroid hormones from wastewater using membrane contactor processes

Growing demands for potable water have strained water resources and increased interest in wastewater reclamation for potable reuse. This interest has brought increased attention to endocrine-disrupting chemicals (EDCs) as emerging water contaminants. The effect of EDCs, and in particular natural steroid hormones, on humans is of heightened interest in the study of wastewater reuse in advanced life support systems (e.g., space missions) because they are excreted in urine and have high endocrine-disrupting potencies. Direct contact membrane distillation (DCMD) and forward osmosis (FO) are being investigated for wastewater treatment in space. Retention of two natural steroid hormones, estrone and 17beta-estradiol, by these two processes was evaluated in the current investigation. DCMD provided greater than 99.5% hormone rejection; DCMD also provided constant flux, greater than 99.9% urea and ammonia rejection, and high water recovery. FO provided from 77 to 99% hormone rejection depending on experiment duration and feed solution chemistry.     

Forward osmosis for concentration of anaerobic digester centrate

The nutrient-rich liquid stream produced during the dewatering of digested biomass (i.e., the centrate) is commonly mixed with the influent raw wastewater at wastewater treatment facilities. This increases the nitrogen and phosphorus loading on biological processes, increases operating costs, and in some cases, results in increased nutrient concentrations in the final effluent. Forward osmosis (FO) is a membrane treatment process that was investigated at bench scale to determine its feasibility to concentrate centrate under both batch and continuous operating conditions. The continuous bench-scale system used FO as pretreatment for reverse osmosis (RO). Results demonstrated that high water flux and high nutrient rejection could be achieved. The combined FO/RO process exhibited sustainable flux over an extended time period. A mathematical model was developed in order to determine the specific energy, power, and membrane area requirements for a larger-scale centrate treatment process. Modeling results indicated that to optimize power and membrane area requirements, the system should be operated at approximately 70% water recovery.     

Comprehensive bench- and pilot-scale investigation of trace organic compounds rejection by forward osmosis

Forward osmosis (FO) is a membrane separation technology that has been studied in recent years for application in water treatment and desalination. It can best be utilized as an advanced pretreatment for desalination processes such as reverse osmosis (RO) and nanofiltration (NF) to protect the membranes from scaling and fouling. In the current study the rejection of trace organic compounds (TOrCs) such as pharmaceuticals, personal care products, plasticizers, and flame-retardants by FO and a hybrid FO-RO system was investigated at both the bench- and pilot-scales. More than 30 compounds were analyzed, of which 23 nonionic and ionic TOrCs were identified and quantified in the studied wastewater effluent. Results revealed that almost all TOrCs were highly rejected by the FO membrane at the pilot scale while rejection at the bench scale was generally lower. Membrane fouling, especially under field conditions when wastewater effluent is the FO feed solution, plays a substantial role in increasing the rejection of TOrCs in FO. The hybrid FO-RO process demonstrated that the dual barrier treatment of impaired water could lead to more than 99% rejection of almost all TOrCs that were identified in reclaimed water.     

Three-dimensional fuzzy graphene ultra-microelectrodes for subcellular electrical recordings

Microelectrode arrays (MEAs) have enabled investigation of cellular networks at sub-millisecond temporal resolution. However, current MEAs are limited by the large electrode footprint since reducing the electrode's geometric area to sub-cellular dimensions leads to a significant increase in impedance thus affecting its recording capabilities. We report a breakthrough ultra-microelectrodes platform by leveraging the outstanding surface-to-volume ratio of nanowire-templated out-of-plane synthesized three-dimensional fuzzy graphene (NT-3DFG). The enormous surface area of NT-3DFG leads to 140-fold reduction in electrode impedance compared to bare Au microelectrodes, thus enabling scaling down the geometric size by 625-fold to ca. 2 μm × 2 μm. The out-of-plane morphology of NT-3DFG leads to a tight seal with the cell membrane thus enabling recording of electrical signals with high signal-to-noise ratio (SNR) of > 6. This work highlights the possibility to push the limits of the conventional MEA technology to enable electrophysiological investigation at sub-cellular level without the need of any surface coatings. This presented approach would greatly impact our basic understanding of signal transduction within a single cell as well as complex cellular assemblies.

     

Synthetically encoded ultrashort-channel nanowire transistors for fast, pointlike cellular signal detection

Nanostructures, which have sizes comparable to biological functional units involved in cellular communication, offer the potential for enhanced sensitivity and spatial resolution compared to planar metal and semiconductor structures. Silicon nanowire (SiNW) field-effect transistors (FETs) have been used as a platform for biomolecular sensors, which maintain excellent signal-to-noise ratios while operating on lengths scales that enable efficient extra- and intracellular integration with living cells. Although the NWs are tens of nanometers in diameter, the active region of the NW FET devices typically spans micrometers, limiting both the length and time scales of detection achievable with these nanodevices. Here, we report a new synthetic method that combines gold-nanocluster-catalyzed vapor-liquid-solid (VLS) and vapor-solid-solid (VSS) NW growth modes to produce synthetically encoded NW devices with ultrasharp (<5 nm) n-type highly doped (n(++)) to lightly doped (n) transitions along the NW growth direction, where n(++) regions serve as source/drain (S/D) electrodes and the n-region functions as an active FET channel. Using this method, we synthesized short-channel n(++)/n/n(++) SiNW FET devices with independently controllable diameters and channel lengths. SiNW devices with channel lengths of 50, 80, and 150 nm interfaced with spontaneously beating cardiomyocytes exhibited well-defined extracellular field potential signals with signal-to-noise values of ca. 4 independent of device size. Significantly, these "pointlike" devices yield peak widths of ～500 μs, which is comparable to the reported time constant for individual sodium ion channels. Multiple FET devices with device separations smaller than 2 μm were also encoded on single SiNWs, thus enabling multiplexed recording from single cells and cell networks with device-to-device time resolution on the order of a few microseconds. These short-channel SiNW FET devices provide a new opportunity to create nanoscale biomolecular sensors that operate on the length and time scales previously inaccessible by other techniques but necessary to investigate fundamental, subcellular biological processes.