High-temperature flexural strength of I-CVI processed Cf/SiC composites with variable interphases

The effect of single-layer pyrocarbon (PyC) and multilayered (PyC/SiC)_n=4 interphases on the flexural strength of un-coated and SiC seal-coated stitched 2D carbon fiber reinforced silicon carbide (C_f/SiC) composites was investigated. The composites were prepared by I-CVI process. Flexural strength of the composites was measured at 1200 °C in air atmosphere. It was observed that irrespective of the type of interphase, the seal coated samples showed a higher value of flexural strength as compared to the uncoated samples. The flexural strength of 470 ± 12 MPa was observed for the seal coated C_f/SiC composite samples with multilayered interphase. The seal coated samples with single layer PyC interphase showed flexural strength of 370 ± 20 MPa. The fractured surfaces of tested samples were analyzed in detail to study the fracture phenomena. Based on microstructure-property relations, a mechanism has been proposed for the increase of flexural properties of C_f/SiC composites having multilayered interphase.     

Expression of Aspergillus nidulans phy Gene in Nicotiana benthamiana Produces Active Phytase with Broad Specificities

A full-length phytase gene (phy) of Aspergillus nidulans was amplified from the cDNA library by polymerase chain reaction (PCR), and it was introduced into a bacterial expression vector, pET-28a. The recombinant protein (rPhy-E, 56 kDa) was overexpressed in the insoluble fraction of Escherichia coli culture, purified by Ni-NTA resin under denaturing conditions and injected into rats as an immunogen. To express A. nidulans phytase in a plant, the full-length of phy was cloned into a plant expression binary vector, pPZP212. The resultant construct was tested for its transient expression by Agrobacterium-infiltration into Nicotiana benthamiana leaves. Compared with a control, the agro-infiltrated leaf tissues showed the presence of phy mRNA and its high expression level in N. benthamiana. The recombinant phytase (rPhy-P, 62 kDa) was strongly reacted with the polyclonal antibody against the nonglycosylated rPhy-E. The rPhy-P showed glycosylation, two pH optima (pH 4.5 and pH 5.5), an optimum temperature at 45~55 °C, thermostability and broad substrate specificities. After deglycosylation by peptide-N-glycosidase F (PNGase-F), the rPhy-P significantly lost the phytase activity and retained 1/9 of the original activity after 10 min of incubation at 45 °C. Therefore, the deglycosylation caused a significant reduction in enzyme thermostability. In animal experiments, oral administration of the rPhy-P at 1500 U/kg body weight/day for seven days caused a significant reduction of phosphorus excretion by 16% in rat feces. Besides, the rPhy-P did not result in any toxicological changes and clinical signs.     

Synthesis and characterization of Si/SiC ceramics prepared using cotton fabric

A Si/SiC ceramic was prepared from cotton fabric by the reactive infiltration of liquid silicon into the carbon template. A large density difference between the samples has been observed. This may be due to the variation in the pore size and its distribution within the sample. Scanning electron microscopy with energy dispersive spectroscopy shows the presence of three distinct phases, i.e., SiC, free Si and free carbon. X-ray diffraction pattern also confirms the presence of SiC and Si phases. However, there is no peak corresponding to carbon. So, it is inferred that the carbon exists in amorphous form. Micro-hardness, fracture toughness and bending strength of the ceramics were also studied. The values are lower than commercially available SiC ceramics. This may be due to the highly porous nature of cotton fabric-based SiC, as compared to commercially available SiC.     

A new energy efficient, environment friendly and high productive texturization process of industrial multicrystalline silicon solar cells

A new texturization process based on a uniform, isotropic and slow removal of silicon, using a composition of sodium hydroxide (NaOH) and sodium hypochlorite (NaOCl) solution at an elevated temperature is developed recently for multicrystalline silicon solar cells. This process is applied in optimized condition in regular industrial production line and it immediately replaces the old popular industrial process of texturization using a combination of NaOH solution, alcoholic NaOH solution and hydrochloric acid solution in different steps at a higher temperature. Also the gain in solar cell efficiency at global AM1.5 spectrum, 1 SUN intensity condition is nearly 10% in final value. In addition, it has become finally an energy efficient and environment friendly texturization process for large area multicrystalline silicon solar cells for commercial use. In this paper the cost effectiveness and environment friendly aspects of the proposed process have been studied in detail along with the surface texture analysis of wafers with SEM and AFM micrographs to substantiate the reasons behind the above facts.     

Growth of highly (1 1 1) oriented CuIn0.75Al0.25Se2 thin films

CuIn_0.75Al_0.25Se₂ thin films prepared onto glass substrates at T_S=573 K were single phase, nearly stoichiometric and polycrystalline with a strong (1 1 1) preferred orientation showing sphalerite structure. The results of X-ray diffraction and electron diffraction studies are compared, interpreted and correlated with micro-Raman spectra. The optical absorption studies indicated a direct band gap of 1.16 eV with high absorption coefficient (>10⁴ cm^?1) near the fundamental absorption edge.     

Comparative studies on fly ash coated low heat rejection diesel engine on performance and emission characteristics fueled by rice bran and pongamia methyl ester and their blend with diesel

In this study, for the first time, fly ash was used as a thermal barrier coating material in a diesel engine. The study consists of three phases. In first phase, biodiesel was prepared in a laboratory scale setup by single step base catalyzed transesterification method. In the second phase, engine combustion chamber elements such as cylinder head, cylinder liner, valves and piston crown face were coated with fly ash, which is a thermal power plant waste, to a thickness of 200 μm by using plasma spray coating method. In third phase, experiments were carried out on fly ash coated single cylinder diesel engine fueled by methyl ester of rice bran, pongamia oil and its blend (20% by volume) with diesel. The test run was repeated on uncoated engine under the same running conditions and the results were compared. An increase in engine power and decrease in specific fuel consumption, as well as significant improvements in exhaust gas emissions (except NOx) were observed for all test fuels used in the fly ash coated engine compared with that of the uncoated engine.     

Reliability properties of low-voltage ferroelectric capacitors and memory arrays

We report on the reliability properties of ferroelectric capacitors and memory arrays embedded in a 130-nm CMOS logic process with 5LM Cu/FSG. Low voltage (<1.5 V) operation is enabled by the 70-nm thick MOCVD PZT ferroelectric films. Data loss resulting from high temperature bakes is primarily caused by the imprint effect, which shows /spl sim/1.5 eV time-to-fail activation energy. Excellent bit endurance properties are observed on fully packaged memory arrays, with no degradation up to 10/sup 13/ write/read polarization switching cycles. Retention measured after 10/sup 12/ switching cycles demonstrates no degradation relative to arrays with minimal cycling.     

Hypoglycaemic and Hypolipidaemic Effects of Withania somnifera Root and Leaf Extracts on Alloxan-Induced Diabetic Rats

Withania somnifera is an important medicinal plant, which is used in traditional medicine to cure many diseases. Flavonoids were determined in the extracts of W. somnifera root (WSREt) and leaf (WSLEt). The amounts of total flavonoids found in WSREt and WSLEt were 530 and 520 mg/100 g dry weight (DW), respectively. Hypoglycaemic and hypolipidaemic effects of WSREt and WSLEt were also investigated in alloxan-induced diabetic rats. WSREt and WSLEt and the standard drug glibenclamide were orally administered daily to diabetic rats for eight weeks. After the treatment period, urine sugar, blood glucose, haemoglobin (Hb), glycosylated haemoglobin (HbA1C), liver glycogen, serum and tissues lipids, serum and tissues proteins, liver glucose-6-phosphatase (G6P) and serum enzymes like aspartate transaminase (AST), alanine transaminase (ALT), acid phosphatase (ACP) and alkaline phosphatase (ALP) levels were determined. The levels of urine sugar, blood glucose, HbA1C, G6P, AST, ALT, ACP, ALP, serum lipids except high density lipoprotein-bound cholesterol (HDL-c) and tissues like liver, kidney and heart lipids were significantly (p < 0.05) increased, however Hb, total protein, albumin, albumin:globulin (A:G) ratio, tissues protein and glycogen were significantly (p < 0.05) decreased in alloxan-induced diabetic rats. Treatment of the diabetic rats with WSREt, WSLEt and glibenclamide restored the changes of the above parameters to their normal level after eight weeks of treatment, indicating that WSREt and WSLEt possess hypoglycaemic and hypolipidaemic activities in alloxan-induced diabetes mellitus (DM) rats.     

Synthesis and slurry spray coating of barium strontium alumino silicate on SiC substrate

Barium strontium alumino silicate (BSAS); (Ba_0.6Sr_0.4Al₂Si₂O₈) was synthesized through solid state reaction between BaCO₃, SrCO₃, Al₂O₃ and SiO₂ subjected to wet milling in isopropanol for about 24 h. The sequence of the solid state reaction was studied by subjecting to DG/DTG from room temperature to 1550 °C. The crystallographic phase evolution was confirmed by X-ray diffraction of the powders calcined in the range 1000 to 1300 °C for 2 h. The monoclinic celsian phase obtained at 1300 °C, pelletized through uniaxial pressing was sinterable to 67 to 78% density in the temperature range of 1300 to 1500 °C. The density improved to 75 to 94% after ball milling for 76 h, while ZrO₂ addition further improved the density by 2%. The celcian phase of BSAS was dispersed in isopropyl alcohol, milled for about 24 h and spray coated on to plain SiC and mullite precoated SiC substrates. Sintering of coated samples and characterization for weight gain/loss, microstructure, scratch test prove that mullite + BSAS coating is more effective than single layer coating of BSAS on SiC substrates.     

Thermodynamic Theory of Single-Crystal Lead Titanate with Consideration of Elastic Boundary Conditions

A phenomenological free-energy function including the effects of elastic boundary conditions was presented and used to investigate the single-domain, single-crystal properties of the ferroelectric perovskite, PbTiO₃. In particular, the effects of tensile and compressive hydrostatic stress on the spontaneous polarization, Curie point, dielectric susceptibility, and piezoelectric property coefficients were examined. The calculated shift of the Curie point with hydrostatic stress, along with the entropy and enthalpy of the ferroelectric-paraelectric phase transition, was found to be in good agreement with experimental measurements. The isothermal variation of the relative dielectric susceptibility and piezoelectric coefficients with hydrostatic stress exhibited the expected behavior near the ferroelectric-paraelectric phase transition.