A new design of flocculation tank: the Turbomix applied to weighted flocculation.

As far as flocculation is concerned, the agglomeration of suspended particles into flocs is highly linked to the hydraulic behaviour of the agitation. The Turbomix is a special design of mixing tank; its design was developed to better control the flow during the flocculation stage. It enables a significant decrease in footprint of the process. The combination of the Turbomix and ballasted flocculation has been studied during pilot trials in terms of treatment efficiency. Its controlled hydraulic behaviour explains the efficiency of the process as proved by CFD investigation.     

Metal-graphene interaction studied via atomic resolution scanning transmission electron microscopy

Distributions and atomic sites of transition metals and gold on suspended graphene were investigated via high-resolution scanning transmission electron microscopy, especially using atomic resolution high angle dark field imaging. All metals, albeit as singular atoms or atom aggregates, reside in the omni-present hydrocarbon surface contamination; they do not form continuous films, but clusters or nanocrystals. No interaction was found between Au atoms and clean single-layer graphene surfaces, i.e., no Au atoms are retained on such surfaces. Au and also Fe atoms do, however, bond to clean few-layer graphene surfaces, where they assume T and B sites, respectively. Cr atoms were found to interact more strongly with clean monolayer graphene, they are possibly incorporated at graphene lattice imperfections and have been observed to catalyze dissociation of C-C bonds. This behavior might explain the observed high frequency of Cr-cluster nucleation, and the usefulness as wetting layer, for depositing electrical contacts on graphene.     

The impact of dietary mono‐ and poly‐unsaturated fatty acids on risk factors for atherosclerosis in humans

The fatty acid composition of the diet has various effects on atherosclerosis risk factors. Dietary saturated fatty acids (SFA) and trans‐unsaturated fatty acids increase the low‐density lipoprotein (LDL)‐/high‐density lipoprotein (HDL)‐cholesterol ratio in serum, while these fats do not have a significant bearing on serum triglyceride levels. By contrast, dietary monounsaturated fatty acids (MUFA), n‐6 polyunsaturated fatty acids (PUFA), and α‐linolenic acid (C18:3n‐3) similarly reduce LDL cholesterol concentrations, while their influence on serum HDL cholesterol and triglycerides is not appreciable. Dietary long‐chain n‐3 PUFA slightly increase serum LDL cholesterol concentrations, but are nevertheless considered salubrious with regard to serum lipids due to the distinct triglyceride‐lowering effects. MUFA‐rich compared to n‐6 PUFA‐rich diets strongly reduce the in vitro oxidizability of LDL. The available studies on this subject also suggest that n‐3 PUFA in the small amounts usually present in the diet are not unduly harmful. These findings are consistent with reports from observational studies: the amount of SFA is positively and the amount of MUFA and n‐6 PUFA in the diet is inversely associated with the risk of cardiovascular disease in most epidemiological studies. The available studies have had an impact on current dietary guidelines, which unanimously recommend that most of the dietary fat should be in the form of MUFA, while the amount of SFA and trans fatty acids in the diet should be as low as possible.     

Free-standing graphene at atomic resolution

Research interest in graphene, a two-dimensional crystal consisting of a single atomic plane of carbon atoms, has been driven by its extraordinary properties, including charge carriers that mimic ultra-relativistic elementary particles. Moreover, graphene exhibits ballistic electron transport on the submicrometre scale, even at room temperature, which has allowed the demonstration of graphene-based field-effect transistors and the observation of a room-temperature quantum Hall effect. Here we confirm the presence of free-standing, single-layer graphene with directly interpretable atomic-resolution imaging combined with the spatially resolved study of both the pi --> pi* transition and the pi + sigma plasmon. We also present atomic-scale observations of the morphology of free-standing graphene and explore the role of microstructural peculiarities that affect the stability of the sheets. We also follow the evolution and interaction of point defects and suggest a mechanism by which they form ring defects.     

Low-temperature fabrication of layered self-organized Ge clusters by RF-sputtering

In this article, we present an investigation of (Ge + SiO₂)/SiO₂ multilayers deposited by magnetron sputtering and subsequently annealed at different temperatures. The structural properties were investigated by transmission electron microscopy, grazing incidence small angles X-ray scattering, Rutherford backscattering spectrometry, Raman, and X-ray photoelectron spectroscopies. We show a formation of self-assembled Ge clusters during the deposition at 250°C. The clusters are ordered in a three-dimensional lattice, and they have very small sizes (about 3 nm) and narrow size distribution. The crystallization of the clusters was achieved at annealing temperature of 700°C.     

Macroscopic graphene membranes and their extraordinary stiffness

The properties of suspended graphene are currently attracting enormous interest, but the small size of available samples and the difficulties in making them severely restrict the number of experimental techniques that can be used to study the optical, mechanical, electronic, thermal, and other characteristics of this one-atom-thick material. Here, we describe a new and highly reliable approach for making graphene membranes of a macroscopic size (currently up to 100 microm in diameter) and their characterization by transmission electron microscopy. In particular, we have found that long graphene beams supported by only one side do not scroll or fold, in striking contrast to the current perception of graphene as a supple thin fabric, but demonstrate sufficient stiffness to support extremely large loads, millions of times exceeding their own weight, in agreement with the presented theory. Our work opens many avenues for studying suspended graphene and using it in various micromechanical systems and electron microscopy.     

Using LMIs to optimize robustness of observer‐based state‐feedback for a synchrotron

In this article, a synthesis method for linear systems subject to uncertain time‐varying parameters is proposed. Starting with the given values for the nominal parameters, the first objective is to find a constant state feedback such that the controlled system is stabilized and given dynamic specifications, such as a minimal decay rate, are met. In a second step, the constant feedback is then locally optimized such that the uncertain system parameters are allowed to vary around their nominal point as much as possible, whereas stabilization and dynamic specifications still hold. In addition, the procedure is extended toward observer‐based state feedback. Finally, this approach is applied to a synchrotron example, where the particle beam in longitudinal direction is to be stabilized and the coherent synchrotron frequency as well as the damping rate are uncertain. Copyright © 2013 John Wiley & Sons, Ltd.     

Scanning tunnelling microscopy of suspended graphene

Suspended graphene has been studied by STM for the first time. Atomic resolution on mono- and bi-layer graphene samples has been obtained after ridding the graphene surface of contamination via high-temperature annealing. Static local corrugations (ripples) have been observed on both types of structures.