Formulation of a ceramic ink for a wide-array drop-on-demand ink-jet printer

This paper describes the methodology for simulating a reprographic ink with a ceramic ink based on a commercially available zirconia powder for direct ceramic ink-jet printing. Of over-riding importance was matching viscosity and this was tested systematically by using a mineral oil–hexane binary system. Of secondary importance was adjustment of the pressure defect behind the nozzle to compensate for small differences in surface tension. The inks tested in the wide array print-head were based on low electrical conductivity liquids to avoid damage to the electroding system. The organic binder for the zirconia ink was paraffin wax and the dispersant was a hydroxystearic acid based polyester.     

Dynamique motivationnelle de l'epuisement et du bien-etre chez des enseignants africains.

This study examines the links between antecedents and consequences of Gabonese teachers' (N= 152) work motivation. The theoretical underpinnings are based on the Motivational Model of Job Burnout (MMJB) which is grounded in Self-Determination Theory (SDT) and states that the more supervisors satisfy an employee's need for self-determination, competence, and relatedness, the more self-determined is the latter's work motivation. The level of self-determined motivation has an impact on job satisfaction, which in turn determines life satisfaction. Higher levels of self-determined motivation also buffer emotional exhaustion and psychological distress. The model was confirmed via structural equation modeling and provides support for the validity and generalizability of the MMJB and SDT. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Development of temperature-heating rate diagrams for the pyrolytic removal of binder used for powder injection moulding

A polypropylene-based binder system was used to injection mould test bars containing 65 vol% aluminium powder. Specimens, 3 and 6 mm thick, made from these bars were used for pyrolytic binder removal experiments in static air and nitrogen. The development of a carefully defined experimental procedure for the determination of the heating rate at which binder removal can be carried out at a given temperature without the creation of macro defects is fully described. The use of isothermal heat treatments during pyrolysis are also considered and results are presented as temperature-heating rate diagrams for each atmosphere and thickness investigated. These diagrams show a lower and an upper boundary. Defect formation occurs if the temperature-heating rate relationship lies between the boundaries. Near optimum binder removal schedules deduced from each diagram have been experimentally verified.     

Die Anfänge der neuzeitlichen Chemie in der Pharmazie und Metallurgie. Zu E.F. Geoffroys tabelle stofflicher Beziehungen

E.F. Geoffroy's table of different relations (“rapports”) between different chemical substances is mainly based on empirical knowledge accumulated in 16th and 17th century metallurgy and pharmacy. The substances listed in the left half of the table were basic for the formation of salts which were produced for medical ends in the chemical-pharmaceutical practice of the 17th century. The right half of the table refers to substances and operations of metallurgy which had already been described in the metallurgical writings of the 16th century. Even Geoffroy's ordering of the substances within the columns of his table has its origin in metallurgical and pharmaceutical practice. The key concept of the conceptual framework underlying the table and its commentary is the concept of chemical compound which emerged at the end of the 17th century. Geoffroy extends the range of application of this concept, which was first limited to chemical artefacts, to include natural bodies. Eliminating the peripatetical distinction between natural bodies and chemical artefacts he formulates a new research program, consisting in the determination of the “laws” of the relations (“rapports”) between different chemical substances.     

Synthesis of silicon oxynitride from a polymeric precursor

Proton nuclear magnetic resonance (¹H NMR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy and gas chromatography (GC) have been used to study the products of ammonolysis of dichloromethylsilane in diethyl ether at 0 °C. Results indicate that the major products are trimethylcyclotrisilazane and tetramethylcyclotetrasilazane. Hydrolysis of the cyclosilazanes has also been qualitatively investigated. A simple and useful method for the identification of cyclosilazanes has been developed using the ¹H NMR technique.     

Downhole Upgrading of Extra-heavy Crude Oil Using Hydrogen Donors and Methane Under Steam Injection Conditions

An extra-heavy crude oil underground upgrading process is described which involves the downhole addition of a hydrogen donor additive under steam injection conditions (280-315°C and residence times of at least 24-h). Laboratory experiments showed a 4° increase in the API gravity (from 9 to 12°) of the upgraded product, a two-fold reduction in the viscosity and, an approximately 8% decrease in the asphaltene content with respect to the original crude. Further increases on the temperature led to products with improved properties reaching 15°API at 315°C. It was found that the presence of the natural formation (catalysts) and methane (natural gas) is necessary to enhance the properties of the upgraded crude oil. From GC and GC-MS results a reaction pathway is proposed that involves hydrogen transfers from tetralin to the extra-heavy crude oil resulting in the formation of 1,2-dihydronaphthalene. This compound is then transformed into naphthalene, further upgrading of crude oil through hydrogen donation. The results of the experiments carried out in the presence and absence of the mineral formation and with an inert solid (SiC) strongly indicate that the former acts as a catalyst and not as a heat transfer matrix. Isotopic labeling studies (CD₄ and ¹³CH₄) give evidences that, most probably, methane is involved in the upgrading reactions.     

The timing of appraisals.

The appraisal process consists of the subjective evaluation that occurs during an individual's encounter with significant events in the environment, determining the nature of the emotional reaction and experience. Placed in the context of appraisal theories of emotion-elicitation and differentiation, the aim of the present research was to test empirically the hypothesis that the intrinsic pleasantness evaluation occurs before the goal conduciveness evaluation. In two studies, intrinsically pleasant and unpleasant images were used to manipulate pleasantness, and a specific event in a Pacman-type videogame was used to manipulate goal conduciveness. Facial EMG was used to measure facial reactions to each evaluation. As predicted, facial reactions to the intrinsic pleasantness manipulation were faster than facial reactions to the goal conduciveness manipulation. These results provide good empirical support for the sequential nature of the appraisal process. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Analysis of the Structure and Biosynthesis of the Lipopolysaccharide Core Oligosaccharide of Pseudomonas syringae pv. tomato DC3000

Lipopolysaccharide (LPS), the major component of the outer membrane of Gram-negative bacteria, is important for bacterial viability in general and host–pathogen interactions in particular. Negative charges at its core oligosaccharide (core-OS) contribute to membrane integrity through bridging interactions with divalent cations. The molecular structure and synthesis of the core-OS have been resolved in various bacteria including the mammalian pathogen Pseudomonas aeruginosa. A few core-OS structures of plant-associated Pseudomonas strains have been solved to date, but the genetic components of the underlying biosynthesis remained unclear. We conducted a comparative genome analysis of the core-OS gene cluster in Pseudomonas syringae pv. tomato (Pst) DC3000, a widely used model pathogen in plant–microbe interactions, within the P. syringae species complex and to other plant-associated Pseudomonas strains. Our results suggest a genetic and structural conservation of the inner core-OS but variation in outer core-OS composition within the P. syringae species complex. Structural analysis of the core-OS of Pst DC3000 shows an uncommonly high phosphorylation and presence of an O-acetylated sugar. Finally, we combined the results of our genomic survey with available structure information to estimate the core-OS composition of other Pseudomonas species.     

Processing and morphology of molecularly imprinted nylon thin films

The characterization of thin, selectively imprinted films of nylon‐6 was performed. Amino acids were used as template molecules. Spin‐cast films were prepared with sizes ranging from 2 μm to 300 nm, depending on the nylon and template concentration in the casting solution. The morphological characteristics of the film surface were examined by atomic force microscopy, and the structure within the films was observed by freeze‐fracture scanning electron microscopy. The film activity was clearly coordinated with the appearance of nanometer‐sized pores both on the surface and within the film. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2919–2926, 2006