Hydraulic reactivity and cement formation of baghdadite

In this study, the hydraulic reactivity and cement formation of baghdadite (Ca₃ZrSi₂O₉) was investigated. The material was synthesized by sintering a mixture of CaCO₃, SiO₂, and ZrO₂ and then mechanically activated using a planetary mill. This leads to a decrease in particle and crystallite size and a partial amorphization of baghdadite as shown by X-ray powder diffraction (XRD) and laser diffraction measurements. Baghdadite cements were formed by the addition of water at a powder to liquid ratio of 2.0 g/ml. Maximum compressive strengths were found to be ~2 MPa after 3-day setting for a 24-h ground material. Inductively coupled plasma mass spectrometry (ICP-MS) measurements showed an incongruent dissolution profile of set cements with a preferred dissolution of calcium and only marginal release of zirconium ions. Cement formation occurs under alkaline conditions, whereas the unground raw powder leads to a pH of 11.9 during setting, while prolonged grinding increased pH values to approximately 12.3.     

Experimental investigation of unconfined spherical and cylindrical flame propagation in hydrogen-air mixtures

This paper presents results of experimental investigations on spherical and cylindrical flame propagation in pre-mixed H₂/air-mixtures in unconfined and semi-confined geometries. The experiments were performed in a facility consisting of two transparent solid walls with 1 m² area and four weak side walls made from thin plastic film. The gap size between the solid walls was varied stepwise from thin layer geometry (6 mm) to cube geometry (1 m). A wide range of H₂/air-mixtures with volumetric hydrogen concentrations from 10% to 45% H₂ was ignited between the transparent solid walls. The propagating flame front and its structure was observed with a large scale high speed shadow system. Results of spherical and cylindrical flame propagation up to a radius of 0.5 m were analyzed. The presented spherical burning velocity model is used to discuss the self-acceleration phenomena in unconfined and unobstructed pre-mixed H₂/air flames.     

Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

Using an integrated process of data and modeling in HRA

The paper describes an approach taken to estimate the probabilities of failure associated with various railroad tasks to prevent accidents (principally collisions and derailments). These probabilities were estimated using an expert elicitation process that used partially relevant data available from a variety of databases and that were filtered and scaled to make them more directly relevant to the analyses being performed. Extensive qualitative studies were performed prior to the elicitation process to identify relevant contexts under which the tasks can be performed.     

RFID im Blickpunkt wirtschaftlicher Überlegungen

Diese Recherche zeigt, dass sich die Bedeutung, die dem Thema RFID in den Medien und der ?ffentlichen Diskussion derzeit beigemessen wird, auch in der Anzahl der im Internet zu findenden Seiten niederschl?gt. Dabei bewegt sich die Qualit?t der betrachteten Angebote überwiegend auf einem hohen Niveau, was vor allem auf Seiten der kommerziellen Anbieter nicht weiter verwundert, da es sich bei RFID doch um einen zunehmend st?rker umk?mpften Markt handelt, auf dem es hei?t, potenzielle Kunden für sich zu akquirieren. Es darf mit Spannung erwartet werden, wie sich das Informationsangebot wandelt, wenn tats?chlich das prognostizierte exponentielle Wachstum des RFID-Marktes eintritt.     

Implementation of RNS-Based Distributed Arithmetic Discrete Wavelet Transform Architectures Using Field-Programmable Logic

Currently there are design barriers inhibiting the implementation of high-precision digital signal processing (DSP) objects with field programmable logic (FPL) devices. This paper explores overcoming these barriers by fusing together the popular distributed arithmetic (DA) method with the residue number system (RNS) for use in FPL-centric designs. The new design paradigm is studied in the context of a high-performance filter bank and a discrete wavelet transform (DWT). The proposed design paradigm is facilitated by a new RNS accumulator structure based on a carry save adder (CSA). The reported methodology also introduces a polyphase filter structure that results in a reduced look-up table (LUT) budget. The 2C-DA and RNS-DA are compared, in the context of a FPL implementation strategy, using a discrete wavelet transform (DWT) filter bank as a common design theme. The results show that the RNS-DA, compared to a traditional 2C-DA design, enjoys a performance advantage that increases with precision (wordlength).     

Light-induced electron spin polarization in the ground state of water-soluble copper porphyrins

Light-induced spin-polarized transient EPR spectra are reported for several water-soluble copper porphyrins. The spectra are assigned to the doublet ground state, with emissive spin polarization resulting from photoexcitation and subsequent electronic relaxation. In contrast to other systems for which polarization of a doublet ground state has been observed, the exchange interactions in the copper porphyrins are strong and the geometry is fixed. It is proposed that intersystem crossing from the photoexcited trip-doublet to the trip-quartet state can lead to net polarization of the spin system and that this polarization is maintained during electronic decay, possibly via charge-transfer and exciplex states. The intensity of the observed spin polarization is essentially independent of the molecular orientation in the external field, but is strongly dependent on the nature of the charged peripheral groups. Possible reasons for this behavior are discussed.     

A cost comparison of balloon angioplasty and stenting versus endarterectomy for the treatment of carotid artery stenosis

PURPOSE: Percutaneous transluminal angioplasty with stenting (PTAS) of the carotid artery has been advocated as an alternative treatment for high-grade stenosis. Rationale for this approach includes less morbidity, shorter recovery, and lower cost when compared with carotid endarterectomy (CEA). METHODS: The clinical results and hospital charges of patients who underwent elective treatment for carotid stenosis were reviewed. During a concurrent 14-month period, 218 patients were admitted 229 times for 234 procedures for the treatment of 239 carotid bifurcation stenoses, 109 by PTAS and 130 by CEA. Hospital charges were reviewed for each hospitalization and were categorized according to radiology, operating room, cardiac catheterization laboratory, and all other hospital charges. RESULTS: The combined incidence of postprocedure strokes and deaths were: PTAS, eight strokes (7.7%) and one death (0.9%); CEA, two strokes (1.5%) and two deaths (1.5%). Total hospital charges per admission for the two groups were $30,140 for PTAS and $21,670 for CEA. The average postprocedure length of stay for PTAS was 2.9 days (median, 2 days) and for CEA was 3.1 days (median, 3 days). Cardiac catheterization laboratory charges for the PTAS group were $12,968, whereas the operating room charges for the CEA group were $4263. When hospitalizations that were extended by complications were excluded, the average total charges for the PTAS group (n = 84) dropped to $24,848 (mean length of stay, 1.9 days) and for the CEA group (n = 111) to $19,247 (mean length of stay, 2.6 days). CONCLUSIONS: After evaluating hospital charges, PTAS for the treatment of carotid stenosis cannot currently be justified on the basis of reduced costs alone. With future cost-containing measures, total hospital charges can be reduced in both groups.