Biohydrogen Production from Organic Waste – A Review

Hydrogen fuel is a promising alternative to fossil fuels because of its energy content, clean nature, and fuel efficiency. However, it is not readily available. Most current producion processes are very energy intensive and emit carbon dioxide. Therefore, this article reviews technological options for hydrogen production that are eco-friendly and generate clean hydrogen fuel. Biological methods, such different fermentation processes and photolysis are discussed together with the required substrates and the process efficiency.     

Electrocatalytic Reduction of CO2 to Ethylene by Molecular Cu‐Complex Immobilized on Graphitized Mesoporous Carbon

The electrochemical reduction of carbon dioxide (CO₂) to hydrocarbons is a challenging task because of the issues in controlling the efficiency and selectivity of the products. Among the various transition metals, copper has attracted attention as it yields more reduced and C2 products even while using mononuclear copper center as catalysts. In addition, it is found that reversible formation of copper nanoparticle acts as the real catalytically active site for the conversion of CO₂ to reduced products. Here, it is demonstrated that the dinuclear molecular copper complex immobilized over graphitized mesoporous carbon can act as catalysts for the conversion of CO₂ to hydrocarbons (methane and ethylene) up to 60%. Interestingly, high selectivity toward C2 product (40% faradaic efficiency) is achieved by a molecular complex based hybrid material from CO₂ in 0.1 m KCl. In addition, the role of local pH, porous structure, and carbon support in limiting the mass transport to achieve the highly reduced products is demonstrated. Although the spectroscopic analysis of the catalysts exhibits molecular nature of the complex after 2 h bulk electrolysis, morphological study reveals that the newly generated copper cluster is the real active site during the catalytic reactions.     

Photo-Chemically-Deposited and Industrial Cu/ZnO/Al2O3 Catalyst Material Surface Structures During CO2 Hydrogenation to Methanol: EXAFS,XANES and XPS Analyses of Phases After Oxidation,Reduction, and Reaction

Catalysis Letters - Industrial Cu/ZnO/Al2O3 or novel rate catalysts, prepared with a photochemical deposition method, were studied under functional CH3OH synthesis conditions at the set temperature...     

Extranasal Staphylococcus aureus colonization predisposes to bloodstream infections in patients on hemodialysis with noncuffed internal jugular vein catheters

Introduction: Staphylococcal infection of endogenous origin is an important cause of morbidity and mortality in patients who receive hemodialysis (HD). The risk of such infections in nasal carriers of the organism is well defined. Extranasal carriage of the organism at extranasal sites may pose similar risks. Methods: A total of 70 patients about to undergo internal jugular vein catheterization for HD were enrolled in this prospective observational study. Swab cultures were obtained from anterior nares, posterior pharynx, axillae, toe web spaces, and vascular access sites at baseline and 1 week later. A patient was defined as a persistent carrier when the same organism was grown in both samples. Staphylococcus aureus bloodstream infections were assessed by blood and catheter tip cultures over a 90‐day period. Findings: The mean age of the patients was 43.71 ± 16.2 years. Persistent S. aureus carriage at anterior nares, throat, axilla, toe web spaces, vascular access site, and all sites was documented in 27.9%, 11.4%, 40%, 32.9%, 4.3%, and 64.2% of patients, respectively. Fifteen patients developed S. aureus infections. Catheter related S. aureus infections (CRI) were more likely in persistent carriers than nonpersistent carriers with odds ratios (95% CI) of 10.2 (2.8–37.1), 8.6 (1.7–42.2), 17.3 (3.4–86.0), 3.0 (0.9–9.8), and 1.9 (0.2–22.4) for anterior nares, throat, axilla, toe web spaces, and vascular access site carriers, respectively. The probability of developing CRI in persistent S. aureus carriers was 55% compared to none in noncarriers at 90 days (P = 0.04). Discussion: Extranasal S. aureus carriage is as significant a risk factor as nasal carriage for staphylococcal infections in patients on HD through catheters. The study is limited by lack of molecular phenotyping.     

A learning automata-based fault-tolerant routing algorithm for mobile ad hoc networks

Reliable routing of packets in a Mobile Ad Hoc Network (MANET) has always been a major concern. The open medium and the susceptibility of the nodes of being fault-prone make the design of protocols for these networks a challenging task. The faults in these networks, which occur either due to the failure of nodes or due to reorganization, can eventuate to packet loss. Such losses degrade the performance of the routing protocols running on them. In this paper, we propose a routing algorithm, named as learning automata based fault-tolerant routing algorithm (LAFTRA), which is capable of routing in the presence of faulty nodes in MANETs using multipath routing. We have used the theory of Learning Automata (LA) for optimizing the selection of paths, reducing the overhead in the network, and for learning about the faulty nodes present in the network. The proposed algorithm can be juxtaposed to any existing routing protocol in a MANET. The results of simulation of our protocol using network simulator 2 (ns-2) shows the increase in packet delivery ratio and decrease in overhead compared to the existing protocols. The proposed protocol gains an edge over FTAR, E2FT by nearly 2% and by more than 10% when compared with AODV in terms of packet delivery ratio with nearly 30% faulty nodes in the network. The overhead generated by our protocol is lesser by 1% as compared to FTAR and by nearly 17% as compared to E2FT when there are nearly 30% faulty nodes.     

Mechanical,morphological, and thermogravimetric analysis of alkali-treated Cordia-Dichotoma natural fiber composites

ABSTRACT

Usage of composites with natural fiber reinforcement is drastically increasing in recent times because of their low density, biodegradable nature, and low cost. However, natural fibers have certain core problems such as poor adhesion between the fiber and matrix and a relatively high degree of moisture absorption. Alkaline treatment of natural fibers is aimed at improving the adhesive strength so that effective stress transferability takes place in the composite. In the present work, Cordia-Dichotoma fibers were treated with sodium hydroxide (NaOH) and composites were prepared with different weight ratios of these fibers reinforced with epoxy. The prepared composites were tested for their tensile and flexural strengths (mechanical properties). Besides, for a comprehensive material characterization, IR spectroscopy (FT-IR), scanning electron microscope, and thermogravimetric analysis were carried out. This work investigates the influence of aforementioned NaOH treatment on thermal, mechanical, and morphological properties of the composite material.     

Review: Investigation of Partially Pre-mixed Charge Ignitions (PPCI) Engine Mode

This paper embraces the key points of unpolluted internally combusted engine emissions. Core objective is focused on the recent effort to improve compression ignition(CI) and spark ignition(SI) engine to have fuel-efficient and minimized pollutant emissions. There are many advanced internal combustion engines to overcome the challenges of conventional compression ignition engines of the high level of particulate matter(PM) and oxides of nitrogen emission. One of the latest options on which many ...     

Effectiveness of sodium silicate as gangue depressants in iron ore slimes flotation

The recovery of iron from the screw classifier overflow slimes by direct flotation was studied.The relative effectiveness of sodium silicates with different silica-to-soda mole ratios as depressants for silica and silicate bearing minerals was investigated.Silica-to-soda mole ratio and silicate dosage were found to have significant effect on the separation efficiency.The results show that an increase of Fe content in the concentrate is observed with concomitant reduction in SiO2 and Al2O3 levels when a particular type of sodium silicate at a proper dosage is used.The concentrate of 58.89wt％ Fe,4.68wt％ SiO2,and 5.28wt％ Al2O3 with the weight recovery of 38.74％ and the metal recovery of 41.13％ can be obtained from the iron ore slimes with 54.44wt％ Fe,6.72wt％ SiO2,and 6.80wt％ Al2O3,when Na2SiO3 with a silica-to-soda mole ratio of 2.19 is used as a depressant at a feed rate of 0.2 kg/t.     

Effect of TiO2 Nano-Filler on Electrical Properties of Na+ Ion Conducting PEO/PVDF Based Blended Polymer Electrolyte

Journal of Inorganic and Organometallic Polymers and Materials - Nanocomposite polymer electrolyte (NCPE) films based on a blend of two polymers poly (ethylene oxide) (PEO) and poly (vinylidene...