Phytoplankton primary production, chlorophyll-a and nutrient concentrations in the water column of mountainous Lake Phewa, Nepal

The seasonal patterns of phytoplankton primary production, chlorophyll‐a concentration, cell number and several other limnological variables in Lake Phewa, located in the active monsoon zone in Central Himalaya, Nepal, were studied for a year beginning in April 2001. During the study period, the gross primary production and chlorophyll‐a concentrations were relatively low during the monsoon season. The phytoplankton cell number, represented by 24 genera, also fluctuated seasonally, but tended to increase in the pre‐ and post‐monsoon period. These results suggest that the monsoon plays a crucial role in the primary production and phytoplankton dynamics for Lake Phewa. Among the phytoplankton species, Microcystis aeruginosa, a representative species for eutrophic lakes, was the dominant phytoplankton. At the same time, however, it is clear that the lake is not yet heavily eutrophic. The present study suggests that the exchange of lake water during the monsoon season contributes to maintaining the health of the lake against further degradation. Nevertheless, the silt carried in the monsoon rain run‐off from the lake's catchment area suggests increasingly serious degradation problems for this small mountainous lake.     

Synthesis and characterization of biocompatible hydroxyapatite coated ferrite

Ferrite particles coated with biocompatible phases can be used for hyperthermia treatment of cancer. We have synthesized substituted calcium hexaferrite, which is not stable on its own but is stabilized with small substitution of La. Hexaferrite of chemical composition (CaO)_0.75(La₂0₃)_0.20(Fe₂O₃)₆ was prepared using citrate gel method. Hydroxyapatite was prepared by precipitating it from aqueous solution of Ca(NO₃)₂ and (NH₄)₂HPO₄ maintaining pH above 11. Four different methods were used for coating of hydroxyapatite on ferrite particles. SEM with EDX and X-ray diffraction analysis shows clear evidence of coating of hydroxyapatite on ferrite particles. These coated ferrite particles exhibited coercive field up to 2 kOe, which could be made useful for hysteresis heating in hyperthermia. Studies by culturing BHK-21 cells and WBC over the samples show evidence of biocompatibility. SEM micrographs and cell counts give clear indication of cell growth on the surface of the sample. Finally coated ferrite particle was implanted in Kasaulli mouse to test its biocompatibility. The magnetic properties and biocompatibility studies show that these hydroxyapatite coated ferrites could be useful for hyperthermia.     

Photocatalytic oxidation of low concentration 2,4-D solution with new TiO2 fiber catalyst in a continuous flow reactor.

Environmental pollution by low concentrations of 2,4-Dichlorophenoxyacetic acid (2,4-D) is a concern these days due to ever increasingly stringent regulations. Photocatalysis with immobilized TiO2 fiber is a promising oxidation method. Laboratory experiments on photocatalytic degradation of 0.045 mmol l(-1) 2,4-D with the world's first high-strength TiO2 fiber catalyst were carried out in a continuous flow reactor in which the degradations were, in general, similar to those with high 2,4-D concentrations investigated elsewhere. Degradation and mineralization of 2,4-D were significantly enhanced with no initial pH adjustments. The rate constants for total organic carbon (TOC) without pH adjustment were about two-fold bigger than the pH adjustment cases. CO2 gas measurement and carbon mass-balance were carried out for the first time, where about 34% organic carbon converted into CO2 gas during four-hour oxidation. 2,4-Dichlorophenol (2,4-DCP), phenol, benzyl alcohol and two unknowns (RT = 2.65 and 3.78 min.) were detected as aromatic intermediates while Phenol was the new aromatic in HPLC analysis. Dechlorination efficiencies were high (> 70%) in all the cases, and more than 90% efficiencies were observed in chloride mass balance. Bigger flow rates and solution temperature fixed at 20 degrees C without pH adjustment greatly enhanced 2,4-D mineralization. These results can be an important basis in applying the treatment method for dioxin-contaminated water and wastewater.     

Structure and mechanical properties of polyethylene-fullerene composites

The microhardness of films of fullerene-polyethylene composites prepared by gelation from semidilute solution, using ultrahigh molecular weight polyethylene (PE) (6×10⁶), has been determined. The composite materials were characterized by optical microscopy and X-ray diffraction techniques. The microhardness of the films is shown to increase notably with the concentration of fullerene particles within the films. In addition, a substantial hardening of the composites is obtained after annealing the materials at high temperatures (T _a=130 °C) and long annealing times (t _a=10⁵s). The hardening of the composites with annealing temperature has been identified with the thickening of the PE crystalline lamellae. Comparison of X-ray scattering data and the microhardness values upon annealing leads to the conclusion of phase separation of C₆₀ molecules from the polyethylene crystals within the material. The temperature dependence is discussed in terms of the independent contribution of the PE matrix of the C₆₀ aggregates to the hardness value.     

Discrete-time spare ordering policy with randomized lead times and discounting

The paper considers a generalized discrete‐time order‐replacement model for a single unit system, which is subject to random failure when in operation. Two types of discrete randomized lead times are considered for a spare unit; one is for regular (preventive) order and another is for expedited (emergency) order. The model is formulated based on the discounted cost criterion. The underlying two‐dimensional optimization problem is reduced to a simple one‐dimensional one and then the optimal ordering policy for the spare unit is characterized under two extreme conditions: (i) unlimited inventory time and (ii) zero inventory time for the spare unit. A numerical example is used to determine the optimal spare‐ordering policy numerically and to examine the sensitivity of the model parameters.     

Novel aspects of the microstructure of PP/PA blends prepared by reactive compounding as studied by microhardness

The microhardness of injection-moulded i-polypropylene/polyamide (iPP/PA) blends prepared by reactive compounding was determined. The formulation rules and processing technology for the preparation of these alloys was reported previously. iPP/PA compositions between 100/0 and 50/50 using functionalized PP with various degrees of mainchain grafting, were investigated. It is shown that the deviation of microhardness from the additivity law of the single components is mainly due to a decrease in the crystallinity of the iPP phase. The results are discussed in the light of the microstructural variations as revealed by X-ray diffraction methods.     

Implementations of a four-level mechanical architecture for fault-tolerant robots

This paper describes a fault tolerant mechanical architecture with four levels devised and implemented in concert with NASA (Tesar, D. & Sreevijayan, D., Four-level fault tolerance in manipulator design for space operations. In First Int. Symp. Measurement and Control in Robotics (ISMCR '90), Houston, Texas, 20–22 June 1990.) Subsequent work has clarified and revised the architecture. The four levels proceed from fault tolerance at the actuator level, to fault tolerance via in-parallel chains, to fault tolerance using serial kinematic redundancy, and finally to the fault tolerance multiple arm systems provide. This is a subsumptive architecture because each successive layer can incorporate the fault tolerance provided by all layers beneath. For instance a serially-redundant robot can incorporate dual fault-tolerant actuators. Redundant systems provide the fault tolerance, but the guiding principle of this architecture is that functional redundancies actively increase the performance of the system. Redundancies do not simply remain dormant until needed. This paper includes specific examples of hardware and/or software implementation at all four levels.     

An alternate method for using a visual discrimination model (VDM) to optimize soft-copy display image quality

Researchers have developed visual discrimination models (VDMs) that can predict a human observer's ability to detect a target object superposed on an image. These models incorporate sophisticated knowledge of the properties of the human visual system. In the predictive approach, termed conventional VDM usage, two input images with and without a target are analyzed by an algorithm that calculates a just-noticeable-difference (JND) index, which is a taken as a measure of the detectability of the target. A new method of using the VDM is described, termed channelized VDM, which involves finding the linear combination of the VDM-generated channels (which are not used in conventional VDM analysis) that has optimal classification ability between normal and abnormal images. The classification ability can be measured using receiver operating characteristic (ROC) or two alternative forced choice (2AFC) experiments, and in special cases they can also be predicted by signal detection theory (SDT) based model-observer methods. In this study simulated background and nodule containing regions were used to validate the new method. It was found that the channelized VDM predictions were in excellent qualitative agreement with human-observer validated SDT predictions. Either VDM method (conventional or channelized) has potential applicability to soft-copy display optimization. An advantage of any VDM-based approach is that complex effects, such as visual masking, are automatically accounted for, which effects are usually not included in SDT-based methods.     

Transporters for cationic amino acids in animal cells: discovery, structure, and function

The structure and function of the four cationic amino acid transporters identified in animal cells are discussed. The systems differ in specificity, cation dependence, and physiological role. One of them, system y+, is selective for cationic amino acids, whereas the others (B[0,+], b[0,+], and y+ L) also accept neutral amino acids. In recent years, cDNA clones related to these activities have been isolated. Thus two families of proteins have been identified: 1) CAT or cationic amino acid transporters and 2) BAT or broad-scope transport proteins. In the CAT family, three genes encode for four different isoforms [CAT-1, CAT-2A, CAT-2(B) and CAT-3]; these are approximately 70-kDa proteins with multiple transmembrane segments (12-14), and despite their structural similarity, they differ in tissue distribution, kinetics, and regulatory properties. System y+ is the expression of the activity of CAT transporters. The BAT family includes two isoforms (rBAT and 4F2hc); these are 59- to 78-kDa proteins with one to four membrane-spanning segments, and it has been proposed that these proteins act as transport regulators. The expression of rBAT and 4F2hc induces system b[0,+] and system y+ L activity in Xenopus laevis oocytes, respectively. The roles of these transporters in nutrition, endocrinology, nitric oxide biology, and immunology, as well as in the genetic diseases cystinuria and lysinuric protein intolerance, are reviewed. Experimental strategies, which can be used in the kinetic characterization of coexpressed transporters, are also discussed.     

Dose-related effects of Ampligen (poly(I).poly(C12U)), a mismatched double-stranded RNA, in a bleomycin-mouse model of pulmonary fibrosis

The antifibrotic effect of the mismatched double-stranded RNA, Ampligen (poly(I).poly(C12U)), was evaluated in a bleomycin-mouse model of pulmonary fibrosis. Mice received a single intratracheal dose of bleomycin (0.125 U/mouse) or saline (50 microL) at the beginning of the experiment, followed by 5 or 6 intraperitoneal injections of Ampligen (1.0, 5.0, 10.0, 15.0, or 25.0 mg/kg) or saline at regular intervals for 2 weeks. Ampligen did not produce increased mortality or weight loss by itself. However, it produced varying degrees of mortality in combination with bleomycin. Five injections of 10 mg/kg Ampligen or three injections of 25 mg/kg Ampligen plus three injections of 10 mg/kg Ampligen in combination with bleomycin .produced significant reductions in lung collagen accumulation as indicated by lung hydroxyproline content compared to the bleomycin control group. Animals receiving bleomycin plus Ampligen at all dosages had significantly reduced prolyl hydroxylase activity compared to the bleomycin control group. Lipid peroxidation and bronchoalveolar lavage fluid (BALF)-supernatant protein content for the groups receiving bleomycin plus Ampligen were not reduced compared to the bleomycin control group. In the BALF-supernatant, the activity of acid phosphatase, a lysosomal enzyme produced by neutrophils, monocytes, and macrophages, was significantly decreased in the group receiving bleomycin plus 10 mg/kg Ampligen. Also, selected BALF differential immune cell counts were reduced in some of the groups receiving bleomycin plus Ampligen, but not in a consistent or dose-dependent manner. The results of this study indicate that Ampligen can significantly reduce the bleomycin-induced increased collagen accumulation and may be therapeutically useful in the management of lung fibrosis in humans.