Mobile positioning using wireless networks: possibilities and fundamental limitations based on available wireless network measurements

Positioning in wireless networks is mainly used for safety, gaming, and commercial services. It is expected to increase in popularity when emergency call services become mandatory as well as with the advent of more advanced location-based services and mobile gaming. In this article, we discuss and illustrate the possibilities and fundamental limitations associated with mobile positioning based on available wireless network measurements. The possibilities include a sensor fusion approach and model-based filtering, while the fundamental limitations provide hard bounds on the accuracy of position estimates, given the information in the measurements in the most favorable situation. The focus of this article is to illustrate the relation between performance requirements, such as those stated by the Federal Communications Commission (FCC), and the available measurements. Specific issues on accuracy limitation in each measurement, such as synchronization and multipath problems, are briefly commented upon. A geometrical example, as well as a realistic example adopted from a cell planning tool, are used for illustration.     

Cover Picture: Programmable Motion and Separation of Single Magnetic Particles on Patterned Magnetic Surfaces (Adv. Mater. 14/2005)

Structured magnetic surfaces enabling programmable motion of single micrometer‐sized magnetic particles are reported on p. 1730 by Gunnarsson and co‐workers. Patterns of thin‐film magnetic elements are tailored to form transport lines with junctions for the separation of individual particles. This method has the potential to improve and generate new applications in biotechnology. The cover shows a schematic of the transportation and separation of magnetic particles functionalized with antibodies capable of selectively capturing the corresponding analytes from a sample.     

Stabilization of slugging in oil production facilities with or without upstream pressure sensors

This paper presents methods for suppressing the slugging phenomenon occurring in multiphase flow. The considered systems include industrial oil production facilities such as gas-lifted wells and flowline risers with low-points. Given the difficulty to maintain sensors in deep locations, a particular emphasis is put on observer-based control design. It appears that, without any upstream pressure sensor, such a strategy can stabilize the flow. Besides, given a measurement or estimate of the upstream pressure, we propose a control strategy alternative to the classical techniques. The efficiency of these methods is assessed through experiments on a mid-scaled multiphase flow loop.     

Using Weibull Analysis for Evaluation of Cost and Schedule Performance

Large amounts of money are lost each year in the construction industry because of poor schedule and cost control. Few contractors specify and follow systematic schedule monitoring practices. Traditionally, the earned value method (EVM) is used to control and monitor schedule performance using the schedule and cost performance indices which compare the budgeted cost of work performed to what was originally scheduled or what is actually expended. This paper presents a statistical approach, namely Weibull analysis, to evaluate stochastically the schedule performance of construction or design projects. The approach can be used in conjunction with the EVM to enhance the evaluation and control of schedule performance. Weibull analysis is a common method for failure analysis and reliability engineering used in a wide range of applications. In this paper, the applicability of Weibull analysis for evaluating and comparing the reliability of the schedule performance of multiple projects is presented. The various steps in the analysis are discussed along with an example in which two projects are analyzed and compared. The authors conclude that Weibull analysis has several advantages and provides a relatively robust and effective method for construction managers to better control and monitor their projects.     

Measurements of Decoherence Times in a Josephson Charge Qubit Using Fast Pulses

We study decoherence of a Josephson charge qubit using fast pulses to perform qubit rotations. The gate charge dependence of the decoherence rate indicates that the low frequency fluctuations affecting the qubit are from charges distributed with a 1/f-type spectrum. Assuming the form S_q(ω) = α/|ω|, we find $\sqrt \alpha$ = 4 × 10^?3e, which is slightly higher than the value found from very low frequency noise measurements. PACS numbers: 03.67.-a, 75.40.+r, 85.25.Cp.     

60 GHz Single-Chip Front-End MMICs and Systems for Multi-Gb/s Wireless Communication

Single-chip 60 GHz transmitter (TX) and receiver (RX) MMICs have been designed and characterized in a 0.15mum (f_T~ 120 GHz/f _MAX> 200 GHz) GaAs mHEMT MMIC process. This paper describes the second generation of single-chip TX and RX MMICs together with work on packaging (e.g., flip-chip) and system measurements. Compared to the first generation of the designs in a commercial pHEMT technology, the MMICs presented in this paper show the same high level of integration but occupy smaller chip area and have higher gain and output power at only half the DC power consumption. The system operates with a LO signal in the range of 7-8 GHz. This LO signal is multiplied in an integrated multiply-by-eight (X8) LO multiplier chain, resulting in an IF center frequency of 2.5 GHz. Packaging and interconnects are discussed and as an alternative to wire bonding, flip-chip assembly tests are presented and discussed. System measurements are also described where bit error rate (BER) and eye diagrams are measured when the presented TX and RX MMICs transmits and receives a modulated signal. A data rate of 1.5 Gb/s with simple ASK modulation was achieved, restricted by the measurement setup rather than the TX and RX MMICs. These tests indicate that the presented MMICs are especially well suited for transmission and reception of wireless signals at data rates of several Gb/s     

Lichen Compounds Restrain Lichen Feeding by Bank Voles <Emphasis Type="Italic">(Myodes glareolus</Emphasis>)

Some lichen compounds are known to deter feeding by invertebrate herbivores. We attempted to quantify the deterring efficiency of lichen compounds against a generalist vertebrate, the bank vole (Myodes glareolus). In two separate experiments, caged bank voles had the choice to feed on lichens with natural or reduced concentrations of secondary compounds. We rinsed air-dry intact lichens in 100% acetone to remove extracellular compounds non-destructively. In the first experiment, pairs of control and rinsed lichen thalli were hydrated and offered to the bank voles. Because the lichens desiccated fast, we ran a second experiment with pairs of ground control and compound-deficient thalli, each mixed with water to porridge. Eight and six lichen species were tested in the first and second experiment, respectively. In the first, bank voles preferred compound-deficient thalli of Cladonia stellaris and Lobaria pulmonaria, but did not discriminate between the other thallus pairs. This was likely a result of deterring levels of usnic and stictic acid in the control thalli. When lichens were served as porridge, significant preference was found for acetone-rinsed pieces of Cladonia arbuscula, C. rangiferina, Platismatia glauca, and Evernia prunastri. The increased preference was caused mainly by lower consumption of control thalli. Grinding and mixing of thallus structures prevented bank voles from selecting thallus parts with lower concentration of secondary compounds and/or strengthened their deterring capacity. We conclude that some lichen secondary compounds deter feeding by bank voles.