Diluted chemical bath deposition of CdZnS as prospective buffer layer in CIGS solar cell

In this study, dilute chemical bath deposition technique has been used to deposit CdZnS thin films on soda-lime glass substrates. The structural, morphological, optoelectronic properties of as-grown films have been investigated as a function of different Zn²⁺ precursor concentrations. The X-ray diffractogram of CdS thin-film reveals a peak corresponding to (002) plane with wurtzite structure, and the peak shift has been observed with the increase of the Zn²⁺ concentration upon formation of CdZnS thin film. From morphological studies, it has been revealed that the diluted chemical bath deposition technique provides homogeneous distribution of film on the substrate even at a lower concentration of Zn²⁺. Optical characterization has shown that the transparency of the film is influenced by Zn²⁺ concentration and when the Zn²⁺ concentration is varied from 0 M to 0.0256 M, bandgap values of resulting films range from 2.42 eV to 3.90 eV while. Furthermore, electrical properties have shown that with increasing zinc concentration the resistivity of the film increases. Finally, numerical simulation validates and suggests that CdZnS buffer layer with composition of 0.0032 M Zn²⁺ concentration would be a promising candidate in CIGS solar cell.     

High-efficiency Silicon Solar Cells: A Review

Over the past few decades, crystalline silicon solar cells have been extensively studied due to their high efficiency, high reliability, and low cost. In addition, these types of cells lead the industry and account for more than half of the market. For the foreseeable future, Si will still be a critical material for photovoltaic devices in the solar cell industry. In this paper, we discuss key issues, cell concepts, and the status of recent high-efficiency crystalline silicon solar cells.     

Exploiting ILP, TLP, and DLP with the polymorphous trips architecture

The Tera-op reliable intelligently adaptive processing system (TRIPS) architecture seeks to deliver system-level configurability to applications and runtime systems. It does so by employing the concept of polymorphism, which permits the runtime system to configure the hardware execution resources to match the mode of execution and demands of the compiler and application.     

Foveation-Based Error Resilience and Unequal Error Protection over Mobile Networks

By exploiting new human-machine interface techniques, such as visual eyetrackers, it should be possible to develop more efficient visual multimedia services associated with low bandwidth, dynamic channel adaptation and robust visual data transmission. In this paper, we introduce foveation-based error resilience and unequal error protection techniques over highly error-prone mobile networks. Each frame is spatially divided into foveated and background layers according to perceptual importance. Perceptual importance is determined either through an eye tracker or by manually selecting a region of interest. We attempt to improve reconstructed visual quality by maintaining the high visual source throughput of the foveated layer using foveation-based error resilience and error correction using a combination of turbo codes and ARQ (automatic reQuest). In order to alleviate the degradation of visual quality, a foveation based bitstream partitioning is developed. In an effort to increase the source throughput of the foveated layer, we develop unequal delay-constrained ARQ (automatic reQuest) and rate compatible punctured turbo codes where the punctual pattern of RCPC (rate compatible punctured convolutional) codes in H.223 Annex C is used. In the simulation, the visual quality is significantly increased in the area of interest using foveation-based error resilience and unequal error protection; (as much as 3 dB FPSNR (foveal peak signal to noise ratio) improvement) at 40% packet error rate. Over real-fading statistics measured in the downtown area of Austin, Texas, the visual quality is increased up to 1.5 dB in PSNR and 1.8 dB in FPSNR at a channel SNR of 5 dB.     

Travelling-wave photodetectors with 172-GHz bandwidth and 76-GHzbandwidth-efficiency product

Results of the first fabrication and measurement of travelling-wave photodetectors are reported. The devices have bandwidths as high as 172 GHz, the highest reported for a p-i-n photodetector, and bandwidth-efficiency products as large as 76 GHz, the largest reported for any photodetector without gain. Comparisons with vertically illuminated and waveguide photodetectors fabricated on the same wafer establish the superior performance of travelling-wave photodetectors. Microwave loss on the travelling-wave photodetector structure is identified as a bandwidth limitation     

Study of Magnetic and Electrical Properties of Poly(o-phenylenediamine)/Manganese Substituted ZnFe2O4 Nanocomposites

Journal of Inorganic and Organometallic Polymers and Materials - Different concentrations of ZnFe2O4 and manganese substituted ZnFe2O4 nanoparticles (10%, 20% and 30%) dispersed...     

Observations on the role of oxide scales in high-temperature erosion-corrosion of alloys

The results are presented of exposure to a controlled high-temperature erosive gas stream of a series of alloys, which were selected to represent the range of microstructures and mechanical properties available in commercial high-temperature alloys. Analysis of the kinetic and morphological data suggested that the high-temperature oxidation behavior of a given alloy plays a very important role in determining its erosion-corrosion behavior under the conditions studied. In terms of relative behavior, alloys which are weak but ductile at temperature, and which form tenacious oxide scales, exhibited the highest resistance to high-temperature erosion-corrosion. Simple models were developed to describe the expected interaction between high-temperature oxidation and erosion.     

Corrosion of Fe-10Al-Cr alloys by coal char

Corrosion of iron-base alloys at 982°C (1800°F) by coal char is observed and the phase morphologies are discussed. No sulfidation was observed at 50 hr exposure. After 100 hr internal aluminum-rich sulfides were observed along with thick outer scales of iron oxide. The species causing the hightemperature-induced corrosion are probably sulfides and sulfates, present in most coal chars. Possible mechanisms for the corrosion are also discussed.Department of Materials Science and Mineral Engineering.     

Structure of polyurethane elastomers. X-ray diffraction and conformational analysis of MDI-propandiol and MDI-ethylene glycol hard segments

X-ray diffraction and conformational analysis have been used to investigate the structure of polyurethane hard segments prepared from diphenylmethane 4,4′-diisocyanate (MDI) with propandiol (PDO) and ethylene glycol (EDO) as chain extenders. The results are compared with those obtained previously for MDI-butandiol (BDO) hard segments. In the latter system, the poly(MDI-BDO) chains are fully extended with an all-trans conformation for the O(CH₂)₄O unit, and a monomer repeat of 18.95 Å. The unit cell is triclinic with a tilted base plane such that adjacent chains are staggered along the fibre axis. In contrast both poly(MDI-PDO) and poly(MDI-EDO) adopt unstaggered structures, i.e. the chains are in register and the unit cell base planes are perpendicular to the chain axis. The monomer repeats of 16.2 Å for poly(MDI-PDO) and 15.0 Å for poly(MDI-EDO) are shorter than the predicted repeats for fully-extended chains, indicating that these polymers have contracted conformations containing some gauche CH₂ groups. Conformational analysis shows that the 16.2 Å repeat for poly(MDI-PDO) can be achieved with the O(CH₂)₃O unit in the trans-gauche⁺-gauche⁺-trans or gauche⁺-trans-trans-gauche⁺ conformations. Similarly the 15.0 Å repeat for poly(MDI-EDO) is predicted for the gauche⁺-trans-gauche^? conformation for the O(CH₂)₂O unit. These conformations are of higher energy than the all-trans fully-extended chains. This may explain the higher crystalline perfection of the poly(MDI-BDO) hard segments, for which crystallization in the all-trans form will probably provide a greater driving force for phase separation.