Oxygen-enrichment of YBa2Cu3 YBa2Cu3O7-δ using the fluidization techniqueusing the fluidization technique

The oxygen-deficient phase of the highT _c superconductor, YBa₂Cu₃O₇, was oxygen-enriched using the fluidization technique to give good superconducting properties. The normal method of oxygen treatment at 900°C for 24 h and at 600°C for 24 h has been reduced to just one treatment at 600°C for 12 h by the fluidization technique to achieve almost the same strength of superconducting signal for the YBa₂Cu₃O₇ powder, which establishes the attractiveness of the latter route for the large-scale preparation of superconducting material. The particle sizes were in the range 0–90, 90–180 and 180–420 μm. The fluidized particles were crystalline with orthorhombic distortion.T _c ^onset , estimated using the a.c. magnetic susceptibility method, was 91·3 K. The volume fraction of superconducting material in the product was 83·7–85·3%, one of the highest values reported so far for YBa₂Cu₃O₇.     

Phase diagram modeling for titanium alloys with light element impurities

It is well known that low levels of light element impurities, such as oxygen and nitrogen, can significantly modify phase equilibria in conventional titanium alloys. However, although the role of nitrogen and oxygen as alpha stabilizers is well established, little quantitative work exists in ternary and higher order systems. Moreover the effect of such elements on equilibria with phases other than cx-and P-Ti is often unknown. The problems in measuring light elements at the microscopic level adds to the difficulty of establishing partitioning, and old axioms are often transferred to new alloys with little evidence that they are applicable. As part of a current program on titanium alloys, phase diagram modeling has been performed for a variety of titanium alloys with additions of oxygen and nitrogen. This paper presents results for the system Ti-Al-V-O-(N,C) with particular reference to the O additions to the commercially important alloy Ti-6A1-4V. This paper was presented at the International Phase Diagram Prediction Symposium sponsored by the ASM/MSD Thermodynamics and Phase Equilibria Committee at Materials Week, October 21–23,1991, in Cincinnati, OH. The symposium was organized by John Morral, University of Connecticut, and Philip Nash, Illinois Institute of Technology.     

Characterization of surface micromachined metallic microneedles

The purpose of the paper is to provide quantitative characterization of metallic microneedles. Mechanical and fluid flow experiments were performed to evaluate the buckling force, the penetration force, and the pressure versus flow rate characteristics of the microneedles. The microneedle design variations characterized included varying the shaft lengths, varying the tip taper angles/geometries, and the inclusion of micromechanical barbs. The penetration force was found to range from 7.8 gF for a microneedle of shaft length 500 /spl mu/m, to 9.4 gF for a length of 1500 /spl mu/m, both with a tip taper angle of 30/spl deg/. Microneedles with a linear tip taper angle of 30/spl deg/ penetrated 95 +% of the time without failure. The microneedles with a 15/spl deg/ and 20/spl deg/ linear tip taper penetrated 10% and 25% of the time, respectively. The buckling force was found to be 98.4 gF for a 500 /spl mu/m long microneedle shaft, 72.3 gF for a needle of shaft length 1000 /spl mu/m, and 51.6 gF for a 1500 /spl mu/m long shaft. The results demonstrate that the penetration force was 7.9% of the buckling force for 500 /spl mu/m long shafts, 11.6% for a 1000 /spl mu/m long shaft, and 18.2% for a 1500 /spl mu/m long microneedle shafts. The microneedle fluid flow characteristics were studied. An inlet pressure of 49.0 Pa was required for a flow rate of 1000 /spl mu/L/h and 243.0 Pa for a flow rate of 4000 /spl mu/L/h using air as the fluid medium. For water, an average pressure of 30.0 kPa was required for a flow rate of 1000 /spl mu/L/h and 106.0 kPa for a flow rate of 4000 /spl mu/L/h.     

Nodal ant colony optimization for solving profit based unit commitment problem for GENCOs

This paper proposes a nodal ant colony optimization (NACO) technique to solve profit based unit commitment problem (PBUCP). Generation companies (GENCOs) in a competitive restructured power market, schedule their generators with an objective to maximize their own profit without any regard for system social benefit. Power and reserve prices become important factors in decision process. Ant colony optimization that mimics the behavior of ants foraging activities is suitably implemented to search the UCP search space. Here a search space consisting of optimal combination of binary nodes for unit ON/OFF status is represented for the movement of the ants to maintain good exploration and exploitation search capabilities. The proposed model help GENCOs to make decisions on the quantity of power and reserve that must be put up for sale in the markets and also to schedule generators in order to receive the maximum profit. The effectiveness of the proposed technique for PBUCP is validated on 10 and 36 generating unit systems available in the literature. NACO yields an increase of profit, greater than 1.5%, in comparison with the basic ACO, Muller method and hybrid LR-GA.     

Magnetic and mössbauer studies on ductile Fe-Cr-Co permanent magnet alloys

Iron-chromium-cobalt alloys possess attractive magnetic properties combined with good formability and hence are identified as technologically important magnetic materials. Alloys with compositions Fe-28·9 Cr-15·6 Co and Fe-28·4 Cr-20·1Co (weight percent) have been studied. Heat-treatment parameters during thermomagnetic treatment viz temperature, time and external magnetic field were optimized with reference to magnetic properties. The fully treated anisotropic alloys develop remanence=11·5–12·0 kilo Gauss, coercivity=600–650 Oersted and energy product=4–4·5 million Gauss Oersted. Electron microscopic and Mössbauer spectroscopic techniques were used to identify the original and transformed phases. During the various stages of the development of the alloy, the changes in mechanical hardness were correlated with magnetic hardness.     

Performance of floating cum tilted-wick type solar still with the effect of water flowing over the glass cover

A simple transient performance of floating cum tilted-wick type solar still has been presented by incorporating the effects of water flowing over a glass cover, heat capacity of tilted-wick water surface and floating-wick water surface. Explicit expressions for flowing water, glass, tilted-wick water surface and floating-wick water surface temperature and efficiency of the system have been derived. Numerical calculations have been carried out for a typical day in the month of March 2004. The relative standard deviations between the numerical and experimental results of different temperature components of the proposed still have been found. The results indicate that the relative standard deviations between theoretical and experimental results are less than 8% (glass cover), 2% (tiltedwick water surface), 1% (floating-wick water surface) and 2% (flowing water at the lower end of the glass cover) an average for the working hours of the day. Moreover, based on the numerical results, the following conclusions have been drawn: (i) glass cover temperature decreases significantly; (ii) the effect of water flowing over the glass cover has a fascinating effect on the production of distillate output during peak sunny hours; (iii) water flow rate of 1.5 m/s is optimum, and beyond it the efficiency decreases. Experimental investigations have been performed at Sri Ramakrishna Mission Vidyalaya College of Arts and Science, Coimbatore, India.     

A Polynomial Time Solution to Minimum Forwarding Set Problem in Wireless Networks under Unit Disk Coverage Model

Network-wide broadcast (simply broadcast) is a frequently used operation in wireless ad hoc networks (WANETs). One promising practical approach for energy-efficient broadcast is to use localized algorithms to minimize the number of nodes involved in the propagation of the broadcast messages. In this context, the minimum forwarding set problem (MFSP) (also known as multipoint relay (MPR) problem) has received a considerable attention in the research community. Even though the general form of the problem is shown to be NP-complete, the complexity of the problem has not been known under the practical application context of ad hoc networks. In this paper, we present a polynomial time algorithm to solve the MFSP for wireless network under unit disk coverage model. We prove the existence of some geometrical properties for the problem and then propose a polynomial time algorithm to build an optimal solution based on these properties. To the best of our knowledge, our algorithm is the first polynomial time solution to the MFSP under the unit disk coverage model. We believe that the work presented in this paper will have an impact on the design and development of new algorithms for several wireless network applications including energy-efficient multicast, broadcast, and topology control protocols for WANETs and sensor networks.     

Topological alternate centrality measure capturing drug targets in the network of MAPK pathways

A new centrality of the nodes in the network is proposed called alternate centrality, which can isolate effective drug targets in the complex signalling network. Alternate centrality metric defined over the network substructure (four nodes – motifs). The nodes involving in alternative activation in the motifs gain in metric values. Targeting high alternative centrality nodes hypothesised to be destructive free to the network due to their alternative activation mechanism. Overlapping and crosstalk among the gene products in the conserved network of MAPK pathways selected for the study. In silico knock‐out of high alternate centrality nodes causing rewiring in the network is investigated using MCF‐7 breast cancer cell line‐based data. Degree of top alternate centrality nodes lies between the degree of bridging and pagerank nodes. Node deletion of high alternate centrality on the centralities such as eccentricity, closeness, betweenness, stress, centroid and radiality causes low perturbation. The authors identified the following alternate centrality nodes ERK1, ERK2, MEKK2, MKK5, MKK4, MLK3, MLK2, MLK1, MEKK4, MEKK1, TAK1, P38alpha, ZAK, DLK, LZK, MLTKa/b and P38beta as efficient drug targets for breast cancer. Alternate centrality identifies effective drug targets and is free from intertwined biological processes and lethality.Inspec keywords: biochemistry, molecular biophysics, cellular biophysics, cancer, drugs, genetics, biomedical materialsOther keywords: MAPK pathways, complex signalling network, pagerank nodes, node deletion, drug targets, MCF‐7 breast cancer cell line‐based data, cellular mechanisms, ERK1 nodes, ERK2 nodes, MEKK2 nodes, MKK5 nodes, MKK4 nodes, MLK3 nodes, MLK2 nodes, MLK1 nodes, MEKK4 nodes, MEKK1 nodes, TAK1 nodes, P38alpha nodes, ZAK nodes, DLK nodes, LZK nodes, MLTKa/b nodes, P38beta nodes