A Monte Carlo simulation study of the mechanical and conformational properties of networks of helical polymers. I. General concepts

We study the mechanical and conformational properties of networks of helical polymers with a combination of Monte Carlo simulations based on the Wang-Landau algorithm and the three-chain model. We find that the stress-strain behavior of these networks has novel features not observed in typical networks made of synthetic polymers. In particular, we find that as these networks are stretched they first strengthen, then soften and finally strengthen again. This non-monotonic behavior of the stress correlates with the one of the helical content and is rationalized by the elongation-induced formation and melting of the helical structure of the polymer. We complement these results with a study of other conformational properties of the polymer strands that clarify the molecular mechanisms behind the mechanical behavior of these networks. Finally, we present a qualitative comparison of some of our results with the theoretical ones recently reported by Kutter and Terentjev.     

Antineoplastic and antioxidant potential of phycofabricated silver nanoparticles using microalgae Chlorella minutissima

This study for the first time reports on fresh water microalgae Chlorella minutissima aqueous extract (CmAe) which was utilized for the biogenic synthesis of silver nanoparticles and tested their antineoplastic potential against Liver Hepatocellular Carcinoma (HepG2) cell line. The characteristic colour change of the reaction mixture from greenish yellow to yellowish brown confirmed the synthesis of Chlorella minutissima silver nanoparticles (CmAgNPs). Microscopic analysis revealed CmAgNPs to be spherical‐shaped with particle size ranging from 10 to 30 nm. The carbohydrates and proteins distinctive peaks were observed in Fourier transform infrared spectroscopy (FTIR) spectra which suggested these biomolecules acted as reducing and capping agents. Further, the crystalline nature of CmAgNPs was confirmed by X‐ray diffraction (XRD) analysis. CmAgNPs showed maximum free radical scavenging proving it to be more potent antioxidant agent as compared to CmAe. The mortality rate of HepG2 cells treated with CmAgNPs was found to be 91.8 % at 120 μg/ml with IC₅₀ value 12.42 ± 1.096 μg/ml after 48 h whereas no effect was observed on normal Human Embryonic Kidney (HEK 293) cells. Fluorescent images of the treated HepG2 cells revealed the formation of apoptotic bodies, condensed nuclei and cell shrinkage indicating their effectiveness against the cancer cells.Inspec keywords: silver, nanoparticles, nanomedicine, microorganisms, cellular biophysics, nanofabrication, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, proteins, Fourier transform infrared spectra, molecular biophysics, X‐ray chemical analysis, X‐ray diffraction, kidney, cancer, biomedical materialsOther keywords: antineoplastic potential, antioxidant potential, phycofabricated silver nanoparticle, Chlorella minutissima, freshwater microalgae, aqueous extract, liver hepatocellular carcinoma cell line, CmAgNP synthesis, field emission scanning electron microscopy, high‐resolution transmission electron microscopy, atomic force microscopy, dynamic light scattering, carbohydrate, protein, Fourier transform infrared spectroscopy, biomolecule, energy‐dispersive X‐ray spectroscopy, elemental silver signal, CmAgNP crystalline, X‐ray diffraction analysis, antioxidant agent, HepG2 cell mortality rate, human embryonic kidney, HEK 293 cell, fluorescent image, apoptotic body formation, condensed nuclei, cell shrinkage, cancer cell, antineoplastic agent, Ag     

Reliability evaluation and optimal design in heterogeneous multi-state series-parallel systems

This paper addresses the heterogeneous redundancy allocation problem in multi-state series-parallel reliability structures with the objective to minimize the total cost of system design satisfying the given reliability constraint and the consumer load demand. The demand distribution is presented as a piecewise cumulative load curve and each subsystem is allowed to consist of parallel redundant components of not more than three types. The system uses binary capacitated components chosen from a list of available products to provide redundancy so as to increase system performance and reliability. The components are characterized by their feeding capacity, reliability and cost. A system that consists of elements with different reliability and productivity parameters has the capacity strongly dependent upon the selection of constituent components. A binomial probability based method to compute exact system reliability index is suggested. To analyze the problem and suggest an optimal/near-optimal system structure, an ant colony optimization algorithm has been presented. The solution approach consists of a series of simple steps as used in early ant colony optimization algorithms dealing with other optimization problems and offers straightforward analysis. Four multi-state system design problems have been solved for illustration. Two problems are taken from the literature and solved to compare the algorithm with the other existing methods. The other two problems are based upon randomly generated data. The results show that the method can be appealing to many researchers with regard to the time efficiency and yet without compromising over the solution quality.     

Conductometric Study of Some Metal Halides in Glycerol + Water Mixtures

Electrolytic conductivities of potassium halides, KX (X = Cl⁻, Br⁻, I⁻) have been investigated in 10, 20, and 30 mass% glycerol + H₂O mixtures at 298.0, 308.0, and 318.0 K. The conductance data have been analyzed by the Fuoss-conductance–concentration equation in terms of the limiting molar conductance (Λ⁰), the association constant (K _A ), and the distance of closest approach of ion (R). The association constant (K _A ) tends to increase in the order: 10 mass% < 20 mass% < 30 mass% glycerol + water mixtures, while it decreases with temperature. Thermodynamic parameters ΔH ⁰, ΔG ⁰, and ΔS ⁰ are obtained and discussed. Also, Walden products (Λ⁰η) are reported. The results have been interpreted in terms of ion–solvent interactions and structural changes in the mixed solvents.     

A Discrete Water Cycle Algorithm for Cellular Network Cost Management

Wireless Personal Communications - Water Cycle Algorithm (WCA) is a nature-inspired metaheuristic algorithm. There is a lack of literature surrounding the use of WCA in modern cellular mobile...     

A Novel FrWT Based Arrhythmia Detection in ECG Signal Using YWARA and PCA

Wireless Personal Communications - In general, Electrocardiogram (ECG) signal gets corrupted by variety of noise at the time of its acquisition. Unfortunately, these noise tend to mask the crucial...     

Effect of amphiphilic compatibilizers on the filler dispersion and properties of polyethylene—thermally reduced graphene nanocomposites

Compatibilizers of different chemical structures and specifications were used to enhance the filler exfoliation in nanocomposites of polyethylene and thermally reduced graphene prepared by melt mixing route. The mechanical performance of the compatibilized nanocomposites was observed to be better than PE/G nanocomposites due to enhanced extent of filler exfoliation and distribution. Highest increase of 45% in tensile modulus and 13% in peak stress was observed in the composites. Overall, from the mechanical, rheological, thermal, and calorimetric properties, the compatibilizers with best performance were ethylene acrylic acid (EAA) copolymer and chlorinated polyethylene (CPE25). Furthermore, the extent of filler exfoliation was observed to increase with increasing EAA content thus confirming positive interactions between EAA and thermally reduced graphene, though no specific chemical interactions could be detected. The composite properties were observed to reach maximum around 7.5 wt % EAA content, followed by reduced performance due to extensive matrix plasticization. The observed behaviors were a result of interplay of opposing factors like filler exfoliation due to compatibilizer addition and matrix plasticization due to its lower molecular weight, thus the observed optimum comaptibilizer amount was specific to the compatibilizer. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42484.