An exploratory study of the behaviour of crude oil spills under ice

An experimental spill of 0.38 m³ of warm (55°C) crude oil under the ice cover of a fresh water pond with an underwater viewing port is described. Temperatures, dissolved hydrocarbon concentrations and oil slick behaviour and areas were determined. Some oil recovery and disposal methods were tested. An attempt has been made to quantify the rates of heat and mass transfer from the oil using reported values for transfer coefficients. The results indicate that the oil slick adopted a thickness of about 2 cm under the ice, that heat transfer from the oil was relatively fast and complete, that dissolution mass transfer is slow resulting in oil concentrations in the water of only 18 to 287 μg/l in the vicinity of the spill. Some recommendations are made for further studies to elucidate the nature and rates of the relevant physical processes and thus assist in assessing the environmental impact of under-ice oil spills.     

Surfascan 3D — An industrial 3D surface texture characterisation instrument

2D profile analysis has often in the past been considered sufficient to control the geometrical features of a surface and to ensure that they are compatible with the required functionalities. Yet, experience shows that 3D surface texture analysis is now essential wherever a complete assessment of the surface is required to enable the selection of the most appropriate surface texture to achieve a required functionality.This paper introduces measurement strategies and features considered as essential by SOMICRONIC when designing or developing 3D surface texture measuring instruments, knowing that the pursued aim is to assess the measured surface in a way to reveal the real surface. This is achieved without losing sight of existing ISO standardized concepts concerning surface texture profile analysis.Indeed, essentially for economical reasons, we consider that 31) surface texture stylus instruments must be designed to achieve classical surface texture profiles measurements and characterisations and to fulfil conditions and characteristics listed and described in existing surface texture ISO standards.We propose to develop in the next paragraphs, the following points:

• - Design of the data acquisition unit of a 3D surface texture instrument

• - Strategy for the measurement of the surface

• - Application of these concepts - Examples.

     

‘Podracing’: experimenting with mobile TV content consumption and delivery methods

Recently, mobile TV has been launched in several countries. While mobile TV integrates television contents into mobile phones, the most personal of communication devices, it becomes interesting to know how this feature will be used throughout the day and in varying contexts of everyday life. This paper presents empirical results on the use of mobile TV with different delivery mechanisms and both quantitative and qualitative results on how end-users prefer to use mobile TV contents in different situations. The data is based on ongoing empirical research in Finland in 2006 and 2007. The mobile TV services under study included both news and entertainment contents, and were tested in 3G, DVB-H and Wi-Fi networks using different delivery paradigms: broadcast, on-demand and download. To explore the use of different delivery methods and content consumption, we have developed a mobile TV service protoype, called Podracing. The analysis shows that users appreciated up-to-date information and information-rich media forms and contents especially for mobile news delivery. There was high demand for only the latest news on mobiles. The real-time property was considered important. Most of the users looked at the headlines or followed the news several times a day – much more often than the traditional TV and news prime times would allow.     

Managing the requirements flow from strategy to release in large-scale agile development: a case study at Ericsson

In a large organization, informal communication and simple backlogs are not sufficient for the management of requirements and development work. Many large organizations are struggling to successfully adopt agile methods, but there is still little scientific knowledge on requirements management in large-scale agile development organizations. We present an in-depth study of an Ericsson telecommunications node development organization which employs a large scale agile method to develop telecommunications system software. We describe how the requirements flow from strategy to release, and related benefits and problems. Data was collected by 43 interviews, which were analyzed qualitatively. The requirements management was done in three different processes, each of which had a different process model, purpose and planning horizon. The release project management process was plan-driven, feature development process was continuous and implementation management process was agile. The perceived benefits included reduced development lead time, increased flexibility, increased planning efficiency, increased developer motivation and improved communication effectiveness. The recognized problems included difficulties in balancing planning effort, overcommitment, insufficient understanding of the development team autonomy, defining the product owner role, balancing team specialization, organizing system-level work and growing technical debt. The study indicates that agile development methods can be successfully employed in organizations where the higher level planning processes are not agile. Combining agile methods with a flexible feature development process can bring many benefits, but large-scale software development seems to require specialist roles and significant coordination effort.     

The 4-way deterministic tiling problem is undecidable

It is shown that the (infinite) tiling problem by Wang tiles is undecidable even if the given tile set is deterministic by all four corners, i.e. a tile is uniquely determined by the colors of any two adjacent edges. The reduction is done from the Turing machine halting problem and uses the aperiodic tile set of Kari and Papasoglu.     

平面四杆机构高阶和复合点阶综合的CAD几何法

提出四连杆机构高阶和复合点近似综合的CAD几点法，确定机构连杆的位置、速度和加速度与轨迹曲线的点，一阶导数和二阶导数的等效关系，基于几何约束和尺寸驱动技术，构造一个基本四连杆模拟机构，再根据机构高阶和复合点阶综合的任务，由基本四连杆模拟机构分别构造出高阶和复合点阶近似综合模拟机构，采用修改尺寸和尺寸动态变化技术，检查和分析尺寸变化对机构的影响因素，干涉情况，确定机构的理想形状，计算机模拟结果表明，该方法不仅快捷，直观，而且具有求解精度高和重复性好的优点，为连杆机构的高阶和复合点阶综合提供有效的工具。     

Brain decoding: Opportunities and challenges for pattern recognition

The neuroimaging community heavily relies on statistical inference to explain measured brain activity given the experimental paradigm. Undeniably, this method has led to many results, but it is limited by the richness of the generative models that are deployed, typically in a mass-univariate way. Such an approach is suboptimal given the high-dimensional and complex spatiotemporal correlation structure of neuroimaging data.Over the recent years, techniques from pattern recognition have brought new insights into where and how information is stored in the brain by prediction of the stimulus or state from the data. Pattern recognition is intrinsically multivariate and the underlying models are data-driven. Moreover, the predictive setting is more powerful for many applications, including clinical diagnosis and brain–computer interfacing. This special issue features a number of papers that identify and tackle remaining challenges in this field. The specific problems at hand constitute opportunities for future research in pattern recognition and neurosciences.     

Drag Power Loss Investigation in Cylindrical Roller Bearings Using CFD Approach

In high-speed rolling element bearings, the drag forces can be prominent and it is demonstrated in this investigation that the classical models may not be appropriate for correctly estimating this power loss contribution. A modification of the models is thus proposed, including the usual drag forces formulation relying upon the drag coefficient to be evaluated from a numerical computational fluid dynamics (CFD) approach. A three-dimensional approach that considers both the rings and the cylinder ends seems the only adequate approach to be used because a two-dimensional approach predicts a drag coefficient value that is too low. When using the former computed drag coefficient for the evaluation of the total power losses, high values of oil volume fraction must be employed to recover the measured power losses.