Agronomic performance of high oleic,low linolenic soybean in Tennessee

Soybean oil hydrogenation alters the linolenic acid molecule to prevent the oil from becoming rancid, however, health reports have indicated trans-fat caused by hydrogenation, is not generally regarded as safe. Typical soybeans contain approximately 80 g kg⁻¹ to 120 g kg⁻¹ linolenic acid and 240 g kg⁻¹ of oleic acid. In an effort to accommodate the need for high-quality oil, the United Soybean Board introduced an industry standard for a high oleic acid greater than 750 g kg⁻¹ and linolenic acid less than 30 g kg⁻¹ oil. By combing mutations in the soybean plant at four loci, FAD2-1A and FAD2-1B, oleate desaturase genes and FAD3A and FAD3C, linoleate desaturase genes, and seed oil will not require hydrogenation to prevent oxidation and produce high-quality oil. In 2017 and 2018, a study comparing four near-isogenic lines across multiple Tennessee locations was performed to identify agronomic traits associated with mutations in FAD3A and FAD3C loci, while holding FAD2-1A and FAD2-1B constant in the mutant (high oleic) state. Soybean lines were assessed for yield and oil quality based on mutations at FAD2-1 and FAD3 loci. Variations of wild-type and mutant genotypes were compared at FAD3A and FAD3C loci. Analysis using a generalized linear mixed model in SAS 9.4, indicated no yield drag or other negative agronomic traits associated with the high oleic and low linolenic acid genotype. All four mutations of fad2-1A, fad2-1B, fad3A, and fad3C were determined as necessary to produce a soybean with the new industry standard (>750 g kg⁻¹ oleic and <30 g kg⁻¹ linolenic acid) in a maturity group-IV-Late cultivar for Tennessee growers.     

Nonhydrolyzable Heptose Bis- and Monophosphate Analogues Modulate Pro-inflammatory TIFA-NF-κB Signaling

d -Glycero-d -manno-heptose-1β,7-bisphosphate (HBP) and d -glycero-d -manno-heptose-1β-phosphate (H1P) are bacterial metabolites that were recently shown to stimulate inflammatory responses in host cells through the activation of the TIFA-dependent NF-κB pathway. To better understand structure-based activity in relation to this process, a family of nonhydrolyzable phosphonate analogues of HBP and H1P was synthesized. The inflammation modulation by which these molecules induce the TIFA-NF-κB signal axis was evaluated in vivo at a low-nanomolar concentration (6 nM) and compared to that of the natural metabolites. Our data showed that three phosphonate analogues had similar stimulatory activity to HBP, whereas two phosphonates antagonized HBP-induced TIFA-NF-κB signaling. These results open new horizons for the design of pro-inflammatory and innate immune modulators that could be used as vaccine adjuvant.     

Geopolymer assembly by emulsion templating: Emulsion stability and hardening mechanisms

This work investigates emulsion templating to synthesize hexadecane oil/geopolymer composites. In a system with hexadecane as the internal (dispersed) phase and an alkali activated continuous phase without added surfactant, adding aluminosilicate clay particles does not increase resistance against creaming or coalescence, while adding a surfactant (L35 or CTAB) stabilizes the solid-liquid interface. Infrared studies and rheological studies of the associated geopolymerization determined that the presence of the organic phase or surfactant has no significant effect on the geopolymerization kinetics, as determined by the change in time of the Si-O-T IR stretching frequency and the rheological moduli involved during the process. The stabilization of the organic template is reminiscent of Pickering emulsion even though we employ a much greater amount of inorganic material for geopolymer formation. Although the addition of surfactant has a significant effect on the behavior of the paste, the percolation of the network remains unmodified, highlighting the fact that the phenomenon is not dependent on viscosity. Finally, rheological measurements were used to obtain the mass fractal dimension of the as-made gel network, which is able to differentiate the interfacial effect between surfactant molecules with a slightly denser interphase when a cationic surfactant is used.     

Characterization of Austempered Ductile Iron Through Barkhausen Noise Measurements

The outstanding mechanical properties of austempered ductile irons (ADI) are linked to the microstructure of the matrix obtained by subjecting a ductile iron with an appropriate composition to a heat treatment called austempering. Then the microstructure of the matrix consists of bainitic ferrite with different volume fractions of retained austenite. The aim of this work is to use the magnetic Barkhausen noise (MBN) as a nondestructive method for characterizing the microstructure of ADI. First, it is shown that the amplitude and position of the peak-shaped MBN response is quite sensitive to the microstructure of the matrix of ductile irons. Thus each type of constituent (equiaxial ferrite, pearlite, martensite or bainite) exhibits a typical response and, in turn, it can be identified from the MBN response. Furthermore, a good correlation is found between MBN signal parameters and ADI heat treatment parameters, indicating that MBN is also quite sensitive to fine evolutions of the microstructure of ADI. MBN peak position is especially sensitive to the type of bainite, whereas peak amplitude is linked to the progress of the bainite reaction. Hence MBN measurements appear to be a powerful tool to assess some important microstructural features of ADI castings.     

Evaluation and optimization of package processing and design through solder joint profile prediction

Solder joints are generated using a variety of methods to provide both mechanical and electrical connection for applications such as flip-chip, wafer level packaging, fine pitch, ball-grid array, and chip scale packages. Solder joint shape prediction has been incorporated as a key tool to aid in process development, wafer level and package level design and development, assembly, and reliability enhancement. This work demonstrates the application of an analytical model and the Surface Evolver software in analyzing a variety of solder processing methods and package types. Bump and joint shape prediction was conducted for the design of wafer level bumping, flip-chip assembly, and wafer level packaging. The results from the prediction methodologies are validated with experimentally measured geometries at each level of design.     

On body-fitted co-ordinates for separated laminar flows past wall-mounted obstacles

A body-fitted curvilinear co-ordinate system is used to solve the equations of two-dimensional incompressible laminar flow over bluff obstructions by finite differences. Arbitrary conditions at the corner are removed by this method. Results for a backward-facing step are in reasonable agreement with those obtained with conventional mesh systems, and the differences are explained. A treatment of a channel expansion, in comparison with empirical data, is also included. The capability of the present method to handle arbitrary two-dimensional geometries is stressed and demonstrated, using a triangle and a semi-circle as examples.     

The effects of recent practice on task switching.

Four experiments investigated the effect of recent selective practice on the cost of switching between 2 tasks afforded by letter-digit pairs: alphabet arithmetic and shape comparison. Experiments 1 and 2 found a greater cost associated with switching to the more recently practiced task: evidence that task-set inertia contributes to switching costs. Experiment 3 found this effect to be limited to trials on which a recently trained stimulus followed another such stimulus: a result problematic for all current theories of task-set priming. Experiment 4 showed that the effect of recent practice was eliminated by active preparation for a task switch: It appears that endogenous task-set preparation reduces the effects of task-set inertia. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Development of a monoclonal antibody to 6 beta-hydroxycortisol and its application in an enzyme-linked immunosorbent assay (ELISA) for 6 beta-hydroxycortisol in urine

A novel monoclonal antibody to 6 beta-hydroxycortisol (6 beta-OHC) was generated and incorporated into an antigen-coated indirect enzyme-linked immunosorbent assay (ELISA) using 6 beta-OHC-protein conjugate as the steroid-coating antigen. The monoclonal antibody is specific to 6 beta-OHC and 6 beta-OHC-3-carboxymethyloxime. Cross-reactivity with other structurally related steroids such as cortisol, cortisone, and 6 beta-hydroxycortisone was less than 10%. Two different clones (clone 5C1 and 19F) of the monoclonal anti-6 beta-OHC antibody have been developed, each with slightly different sensitivity and specificity. The sensitivity of the MAb clones was not significantly improved when compared to the rabbit polyclonal antibodies in this study, but still within the accepted detection limit for 6 beta-OHC in both human and laboratory animals. The assay had a detection limit of 200 ng/ml, an intraassay variation of 6.4% and an interassay variation of 7.3%. The application of the anti-6 beta-OHC-MAb-based-ELISA was tested by measuring the urinary output of 6 beta-OHC in human before and after enzyme induction by rifampicin treatment. The mean 24-h urine output of 6 beta-OHC in human subjects was 485 +/- 100 micrograms and 1478 +/- 281 micrograms before and after rifampicin administration, respectively. In conclusion, the monoclonal anti-6 beta-OHC antibody developed in this study has the required specificity and sensitivity as an alternative method for measuring urinary 6 beta-OHC in the detection of enzyme induction or enzyme inhibition of CYP3A in humans and laboratory animals.