Metabolic Profiling of VOCs Emitted by Bacteria Isolated from Pressure Ulcers and Treated with Different Concentrations of Bio-AgNPs

Considering the advent of antibiotic resistance, the study of bacterial metabolic behavior stimulated by novel antimicrobial agents becomes a relevant tool to elucidate involved adaptive pathways. Profiling of volatile metabolites was performed to monitor alterations of bacterial metabolism induced by biosynthesized silver nanoparticles (bio-AgNPs). Escherichia coli, Enterococcus faecalis, Klebsiella pneumoniae and Proteus mirabilis were isolated from pressure ulcers, and their cultures were prepared in the presence/absence of bio-AgNPs at 12.5, 25 and 50 µg mL⁻¹. Headspace solid phase microextraction associated to gas chromatography–mass spectrometry was the employed analytical platform. At the lower concentration level, the agent promoted positive modulation of products of fermentation routes and bioactive volatiles, indicating an attempt of bacteria to adapt to an ongoing suppression of cellular respiration. Augmented response of aldehydes and other possible products of lipid oxidative cleavage was noticed for increasing levels of bio-AgNPs. The greatest concentration of agent caused a reduction of 44 to 80% in the variety of compounds found in the control samples. Pathway analysis indicated overall inhibition of amino acids and fatty acids routes. The present assessment may provide a deeper understanding of molecular mechanisms of bio-AgNPs and how the metabolic response of bacteria is untangled.     

Retention of gallium ions from acidic solutions by pyridine strong‐base anion exchangers

Using the batch method, the retention of Ga(III) from HCl solutions by two gel‐type pyridine strong‐base anion exchangers containing 1‐methyl‐ or 1‐butyl‐4‐vinylpyridinium chloride structural units, called S₁ and S₂ resins, respectively, was studied. The influence of the HCl and Ga(III) concentrations as well as of the contact time between the resin and the liquid phase was investigated. The parameters, which characterize the retention process, were estimated using Langmuir and Freundlich isotherms. Both resins exhibited a higher affinity for gallium ions from a 6M HCl solution. According to Langmuir isotherms, maximum retention capacities of 44.44 and 60 mg Ga(III)/g dry resin for the S₁ and S₂ resins, respectively, were obtained. Freundlich isotherms provide additional proof for a higher affinity of the S₂ resin for Ga(III) from HCl solutions. It is clear that the substituent length increase on N⁺ atoms led to an increasing affinity of the pyridine strong base anion exchangers toward Ga(III). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3440–3444, 2002     

The stacked lamellar texture on the fracture surfaces of fibre composites

A fracture surface texture, which has been variously termed as lacerations, hackles or serrations, is often observed on the matrix surface of fibre composites, most often in resin-rich regions. This texture, referred to here as a stacked lamellar texture to emphasize its plate-like nature, was studied in an E-glass/epoxy composite. Scanning electron fractographs of these materials suggest that the stacked lamellar texture arises from crack fingers due to a meniscus instability mechanism interacting with a reorienting stress field.     

Synthesis of poly(urethane-urea) varnish bearing azobenzene chromophoric pendants

A new diol with azoaromatic pendant was prepared by N-phenyl-4-amido-3,4-dichloromaleimide with 2-mercaptoethanol in the presence of NaOH, and used to obtain photosensible poly(urethane-urea) varnish. A poly(urethane-urea) varnish bearing azobenzene chromophores, based on a poly(ethylene adipate)diol (average molecular weight—2000), 4,4′-dibenzyldiisocyanate, diethylene glycol, trimethylolpropane, and afore-mentioned diol, were prepared and characterized. The polymers were characterized by FTIR spectroscopy, thermal analysis (DMA, DSC, and TGA), and the photochromic behavior by UV irradiation of thin films was discussed.     

Contactless Spin Switch Sensing by Chemo-Electric Gating of Graphene

Direct electrical probing of molecular materials is often impaired by their insulating nature. Here, graphene is interfaced with single crystals of a molecular spin crossover complex, [Fe(bapbpy)(NCS)₂], to electrically detect phase transitions in the molecular crystal through the variation of graphene resistance. Contactless sensing is achieved by separating the crystal from graphene with an insulating polymer spacer. Next to mechanical effects, which influence the conductivity of the graphene sheet but can be minimized by using a thicker spacer, a Dirac point shift in graphene is observed experimentally upon spin crossover. As confirmed by computational modeling, this Dirac point shift is due to the phase-dependent electrostatic potential generated by the crystal inside the graphene sheet. This effect, named as chemo-electric gating, suggests that molecular materials may serve as substrates for designing graphene-based electronic devices. Chemo-electric gating, thus, opens up new possibilities to electrically probe chemical and physical processes in molecular materials in a contactless fashion, from a large distance, which can enhance their use in technological applications, for example, as sensors.     

Polyimides with 3,3’-Bipyrrolidine-2,2’,5,5’-Tetrone Units

Summary New linear polymers with 3,3’-bipyrrolidine-2,2’,5,5’-tetrone units were prepared by the ring-coupling reaction of α,α’-bis(chlorosuccinimide)s under the action of dust zinc and iodine. Bis(α-chlorosuccinimide)s were synthesized by the dehydrocyclization of the bismaleamic acids in the presence of thionyl chloride. The IR, ¹H-NMR and ¹³C-NMR spectroscopy and elemental analysis confirmed the structure of monomers and polymers. The thermal behaviour of the polymers was monitored using dynamic thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC).     

Degradation of pharmaceutical compound pentoxifylline in water by non-thermal plasma treatment

The decomposition of a model pharmaceutical compound, pentoxifylline, in aqueous solution was investigated using a dielectric barrier discharge (DBD) in coaxial configuration, operated in pulsed regime, at atmospheric pressure and room temperature. The solution was made to flow as a film over the surface of the inner electrode of the plasma reactor, so the discharge was generated at the gas-liquid interface. Oxygen was introduced with a flow rate of 600 sccm. After 60 min plasma treatment 92.5% removal of pentoxifylline was achieved and the corresponding decomposition yield was 16 g/kWh. It was found that pentoxifylline degradation depended on the initial concentration of the compound, being faster for lower concentrations. Faster decomposition of pentoxifylline could be also achieved by increasing the pulse repetition rate, and implicitly the power introduced in the discharge, however, this had little effect on the decomposition yield. The degradation products were investigated by liquid chromatography-mass spectrometry technique (LC-MS). The evolution of the intermediates during plasma treatment showed a fast increase in the first 30 min, followed by a slower decrease, so that these products are almost completely removed after 120 min treatment time.     

Chemical modification of chloromethylated polysulfones via click reactions

A new approach to the modification of azidomethyl polyethersulfones using click reactions with acetylenic derivatives in the presence of CuBr as catalyst is presented. An azidomethyl polyethersulfone was prepared by the reaction of chloromethylated polysulfone with sodium azide in dimethylformamide. By the Cu(I)‐catalysed Huisgen 1,3‐dipolar cycloaddition reaction of the azidomethyl polyethersulfone to acetylenic derivatives, new polyethersulfones containing 1,2,3‐triazole rings were obtained. The structures of the polymers were confirmed using attenuated total reflectance Fourier transform infrared and NMR spectroscopy. The polymers were characterized using dynamic mechanical analysis, thermogravimetric analysis, stress‐strain and water contact angle measurements and solubility tests. The polymers bearing 1,2,3‐triazole rings having OH or COOH as substituents exhibited static contact angles smaller than that of the parent polyethersulfone. Copyright © 2010 Society of Chemical Industry     

Metal Triflates Incorporated in Mesoporous Catalysts for Green Synthesis of Fine Chemicals

Strong Lewis acid SnTf-MCM-41 and SnTf-UVM-7 catalysts with unimodal and bimodal pore systems were prepared in a two-step synthesis in which the triflic acid (Tf) was incorporated into previously synthesized mesoporous tin-containing silicas. The Sn incorporation inside the pore walls was carried out through the Atrane method. The SnTf-UVM-7 catalysts were prepared by aggregating nanometric mesoporous particles defining a hierarchic textural-type additional pore system. Catalysts with different Si/Sn ratios in the range 21.8–50.8 for SnTf-MCM-41 and 18.4 for SnTf-UVM-7 were found to be efficient catalysts for the acylation of aromatics and heteroaromatics. Under microwave irradiation the reaction was possible even with acetic acid. The selectivity to the desired product (o-hydroxyacetophenone for phenol) or the unfavored three-substituted five ring heterocycles was dramatically increased under these conditions. The process is green, environmentally safe, and heterogeneous.