Preparation of an anion‐exchange adsorbent by the radiation‐induced grafting of vinylbenzyltrimethylammonium chloride onto cotton cellulose and its application for protein adsorption

Poly(vinylbenzyltrimethylammonium chloride)‐graft‐cotton cellulose, an anion‐exchange matrix, was synthesized by a mutual radiation‐induced grafting technique with a ⁶⁰Co γ‐radiation source. The grafted matrix was characterized by grafting yield estimation, elemental analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. The grafting yield decreased with the increase in the dose rate. However, the grafting yield and nitrogen content of grafted samples increased almost linearly with an increase in the total irradiation dose. To evaluate the performance of the grafted anion‐exchange matrix, the protein adsorption and elution behavior were investigated in a continuous column process under various experimental conditions, with bovine serum albumin used as a model protein. The binding and elution behavior of the anion‐exchange matrix depended on different experimental parameters, such as the grafting yield, ionic strength, pH of the medium, and amount of protein loaded. From a breakthrough curve, the equilibrium binding capacity and elution percentage of the grafted anion‐exchange matrix were estimated to be 40 mg/g and 94%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5512–5521, 2006     

MEASUREMENT OF COEFFICIENTS FOB SIMULTANEOUS HEAT AND MASS TRANSFER IN FOOD PRODUCTS

Two experimental devices were designed and built to determine four coefficients K_T K_M D_M D (or δ_T = D_T / D_M occurring in simultaneous heat and mass transfer equations, where,K _T and D_M are thermal conductivity and moisture diffcusivity respectively, D_T ( or δ _T is temperature gradient Induced moisture migration coefficient and K_M is moisture gradient Induced heat transfer coefficient. Three food materials, i.e. potato, bread dough and bread, were tested. From this study, it was found that the value of 5 was higher for low density food materials, such as bread, than for high density materials, such as potato. The coefficient & measures moisture migration contribution due to temperature gradient within the material. The average values of δ _T for potato, bread dough and bread were 0.0014, 0.0059 and 0.0127 per °C, respectively. The contribution of temperature gradient to the overall moisture migration is negligible In high density materials. However, this contribution may be important in the moisture migratlon analysls for low density materials. The moisture gradient induced heat transfer coefficient % as found to be negligible for the materials tested in this study     

Surveillance of Drinking Water Quality for Safe Water Supply—A Case Study from Shillong,India

To ascertain the quality of drinking water being supplied and maintained, it is necessary to conduct water quality surveillance for evolving suitable strategy for future planning. In the present investigation, water quality was monitored in treatment plants, service reservoirs, and at consumer ends in three seasons to assess the baseline water quality status at Shillong in Meghalaya. There are three water treatment plants at Shillong namely Umkhen, Mawlai and GSWS with design capacities of 1.5, 3.4 and 34 Million liter per day (MLD) respectively. Each treatment plant is having rapid sand filtration followed by disinfection. The study reveals that the physico-chemical parameters of water quality at consumer end meets Indian drinking water quality standards (BIS 1991) after conventional treatment followed by disinfection, whereas the bacteriological parameters for raw water sources exceed the permissible limit indicating the treatment need for drinking purposes. Throughout year the average feacal coliform contamination at service reservoir and to consumer end were found as 44 to 156 CFU/100 ml which may be attributed to the general management practices for maintenance of service reservoirs and the possibility of en route contamination.     

Biogenic copper nanoparticles promote the growth of pigeon pea (Cajanus cajan L.)

Environmental pollution and toxicity have been increasing due to the overuse of chemical fertilisers, which has encouraged nanotechnologists to develop eco‐friendly nano‐biofertilisers. The authors demonstrated the effect of biogenic copper nanoparticles (CuNPs) on the growth of pigeon pea (Cajanus cajan L.). The UV–visible analysis showed absorbance at 615 nm. Nanoparticle tracking and analysis revealed particle concentration of 2.18 × 10⁸ particles/ml, with an average size of 33 nm. Zeta potential was found to be −16.7 mV, which showed stability. X‐ray diffraction pattern depicted the face centred cubic structure of CuNPs; Fourier transform infrared spectroscopy demonstrated the capping due to acidic groups, and transmission electron micrograph showed nanoparticles with size 20–30 nm. The effect of CuNPs (20 ppm) on plant growth was studied, for the absorption of CuNPs by plants on photosynthesis, which was evaluated by measuring chlorophyll a fluorescence using Handy‐Plant Efficiency Analyser. CuNPs treatment showed a remarkable increase in height, root length, fresh and dry weights and performance index of seedlings. The overall growth of plants treated with CuNPs after 4 weeks was recorded. The results revealed that inoculation of CuNPs contribute growth and development of pigeon pea due to growth promoting activity of CuNPs.Inspec keywords: pollution, toxicology, nanotechnology, cropsOther keywords: biogenic copper nanoparticles, pigeon pea, Cajanus cajan L, environmental pollution, toxicity, chemical fertilisers, nanotechnologists, eco‐friendly nano‐biofertilisers, cash crop, UV‐visible analysis, nanoparticle tracking, zeta potential, X‐ray diffraction pattern, Fourier transform infrared spectroscopy, acidic groups, transmission electron micrograph, photosynthesis, chlorophyll, fluorescence, Handy‐Plant Efficiency Analyser, performance index     

Experimental investigations into electric discharge grinding and ultrasonic vibration-assisted electric discharge grinding of Inconel 601

The paper presents experimental investigations into electric discharge grinding (EDG) and ultrasonic vibration-assisted electric discharge grinding (UVAEDG) of Inconel 601. The process parameters selected for both processes were duty cycle, discharge current, pulse on time, grinding wheel speed, work speed, and speed ratio to study their influence on responses like surface roughness (R_a) and material removal rate (MRR). It was found that duty cycle, wheel speed, work speed, discharge current, speed ratio, and pulse duration significantly influenced MRR and R_a. It was inferred that MRR increased with increase in duty cycle, wheel speed, current, work speed, and pulse duration in both EDG and UVAEDG processes. It was also inferred that R_a increased with rise in duty factor, pulse on time, and discharge current in EDG and UVAEDG processes.     

Orthonormal polynomials in wavefront analysis: analytical solution

Zernike circle polynomials are in widespread use for wavefront analysis because of their orthogonality over a circular pupil and their representation of balanced classical aberrations. In recent papers, we derived closed-form polynomials that are orthonormal over a hexagonal pupil, such as the hexagonal segments of a large mirror. We extend our work to elliptical, rectangular, and square pupils. Using the circle polynomials as the basis functions for their orthogonalization over such pupils, we derive closed-form polynomials that are orthonormal over them. These polynomials are unique in that they are not only orthogonal across such pupils, but also represent balanced classical aberrations, just as the Zernike circle polynomials are unique in these respects for circular pupils. The polynomials are given in terms of the circle polynomials as well as in polar and Cartesian coordinates. Relationships between the orthonormal coefficients and the corresponding Zernike coefficients for a given pupil are also obtained. The orthonormal polynomials for a one-dimensional slit pupil are obtained as a limiting case of a rectangular pupil.     

Orthonormal aberration polynomials for anamorphic optical imaging systems with rectangular pupils

The classical aberrations of an anamorphic optical imaging system, representing the terms of a power-series expansion of its aberration function, are separable in the Cartesian coordinates of a point on its pupil. We discuss the balancing of a classical aberration of a certain order with one or more such aberrations of lower order to minimize its variance across a rectangular pupil of such a system. We show that the balanced aberrations are the products of two Legendre polynomials, one for each of the two Cartesian coordinates of the pupil point. The compound Legendre polynomials are orthogonal across a rectangular pupil and, like the classical aberrations, are inherently separable in the Cartesian coordinates of the pupil point. They are different from the balanced aberrations and the corresponding orthogonal polynomials for a system with rotational symmetry but a rectangular pupil.     

Copyright protection using KELM-PSO based multi-spectral image watermarking in DCT domain with local texture information based selection

Multimedia Tools and Applications - Since many years, researchers have been developing techniques for copyright protection. This paper presents a novel approach for copyright protection of...     

Comparison of mechanical properties of ground corn stover,switchgrass, and willow and their pellet qualities

Mechanical and physical properties of ground corn stover, switchgrass, and willow were measured and compared in addition to the quality of pellets. Biomass was size-reduced with two different screen sizes (3.175 and 6.35?mm) and conditioned to obtain samples at two different moisture contents (17.5 and 20% on wet basis). Ground switchgrass had the smallest and willow had the highest D₅₀ when size-reduced with the same screen size. Hydrostatic triaxial compression tests were performed using the cubical triaxial tester to determine the bulk modulus, compression index, and spring-back index at specific unloading pressures (20, 45, 70, and 95?kPa). The trends of pressure vs. volumetric strain and void ratio vs. natural log of pressure were similar for all three materials; however, the magnitudes were different. Willow, size-reduced with 3.175?mm screen size at 17.5% wet basis, had the highest bulk modulus among different conditions of all the three biomass. Pellet durability values for all the three materials were higher than 80%. Corn stover pellets formed with 3.175?mm screen size at 20% wet basis had the highest diametral tensile and axial compressive strengths among different conditions for all the three biomass, however the values were not significantly different (p?>?0.05).