A review on queueing network models with finite capacity queues for software architectures performance prediction

A review is carried out on how queueing network models with blocking have been applied so far into the performance evaluation and prediction of Software Architectures (SA). Queueing network models with finite capacity queues and blocking have recently been introduced and applied as more realistic models of systems with finite capacity resources and population constraints. Queueing network models have been often adopted as models for the evaluation of software performance. Starting from our own experience, we observe the need of a more accurate definition of the performance models of SA to capture some features of the communication systems. We consider queueing networks with finite capacity and blocking after service (BAS) to represent some synchronization constraints that cannot be easily modeled with queueing network models with infinite capacity queues. We investigate the use of queueing networks with blocking as performance models of SA with concurrent components and synchronous communication. Queueing theoretic analysis is used to solve the queueing network model and study the synchronous communication and performance of concurrent software components. Our experience is supported by other approaches that also propose the use of queueing networks with blocking. Directions for future research work in the field are included.     

FMR and EXAFS modeling of heat-treated Fe-rich and Co-rich TM-M thin films

Ion-beam sputter-deposited alloy films of Co/sub 74/Fe/sub 6/B/sub 15/Si/sub 5/ and Fe/sub 75/Ni/sub 5/B/sub 15/Si/sub 5/ were examined for their magnetic and structural properties. Films were characterized by ferromagnetic resonance, vibrating sample magnetometry, and extended X-ray absorption fine structure (EXAFS) analysis. Using atomic parameters deduced from EXAFS modeling and fitting procedures, magnetic properties were calculated with no adjustable parameters. Correlation between perpendicular FMR measurements and EXAFS first-shell modeling suggests a low-temperature formation of cobalt-borides in the Co/sub 74/Fe/sub 6/B/sub 15/Si/sub 5/ alloy. Annealed Fe/sub 75/Ni/sub 5/B/sub 15/Si/sub 5/ samples did not display evidence of structural and/or magnetic instabilities until the onset of long-range crystallization near T/sub ann/=400 degrees C.<>     

Macrophage-derived cytokines in the follicular fluids of women with infertility due to immunological causes. Elevated levels of interleukin 6 and low levels of granulocyte-macrophage colony-stimulating factor

Myoclonus of the middle ear is a rare condition characterized by abnormal repetitive muscle contractions of the tympanic cavity. In this paper we describe what we believe is the first reported case of continuous high-frequency objective tinnitus caused by middle ear myoclonus. During exploratory tympanomastoidectomy it was hypothesized that a small dural arteriovenous malformation not identified on previous tests was the cause of the tinnitus. However, complete disappearance of the tinnitus during administration of curare for anesthesia led us to believe that the tinnitus might have been caused by myoclonus of the middle ear. Sectioning of the stapedius and tensor tympani tendons rendered the patient asymptomatic and confirmed the diagnosis of middle ear myoclonus. At follow-up of one year, the patient's quality of life had improved substantially; the tinnitus did not recur and she no longer had vertigo.     

Transport properties of dichloromethane in glassy polymers. I. Atactic polystyrene films

Sorption and diffusion of dichloromethane vapor were measured in atactic polystyrene films, obtained with different cooling conditions and after controlled aging times at different temperatures. The diffusional behavior is characterized by three zones, depending on temperature and penetrant activity. In Zone I, at low activity, the diffusion coefficient is independent of vapor concentration; Zone II is characterized by concentration-dependent diffusion, whereas in Zone III structural transformations are possible. The study of diffusion at three temperatures allowed building of a temperature-penetrant concentration diagram, which is very useful to visualize the different zones of behavior. The aging at room temperature has no effect on the curve of sorption as a function of vapor activity, whereas it determines two effects on the diffusion: a decrease of the zero concentration diffusion coefficient and a more and more anomalous behavior with the aging time. The aging at 70°C produces the same effects on the diffusion behavior as the aging at room temperature; in addition, a decrease sorption is observed at low penetrant activity. The possible presence of ordered domains, impermeable to the vapor, in the samples stored at 70°C, was suggested on the basis of sorption results.     

Molecular orientation in drawn smectic and crystalline isotactic polypropylene

The drawing behavior of two polypropylene films of different structures was analyzed. The two films differ as a consequence of different quenching conditions. At low temperature, a biphasic smectic-amorphous system was obtained, while quenching at 100°C produced a biphasic crystalline-amorphous system. The drawing of samples was carried out at 110°C at which temperature the smectic phase is not stable and is transformed into the crystalline α-form. The initial structure affects the drawing behavior and the properties of the drawn samples. The mechanical, optical, and X-ray analyses clearly show that high molecular orientation is achieved at lower deformations in the initially smectic sample. In particular, the amorphous phase is highly oriented, inducing higher axial elastic modulus.     

Variational multiscale large-eddy simulations of the flow past a circular cylinder: Reynolds number effects

Variational multiscale large-eddy simulations (VMS–LES) of the flow around a circular cylinder are carried out at different Reynolds numbers in the subcritical regime, viz. Re = 3900, 10,000 and 20,000, based on the cylinder diameter. A mixed finite-element/finite-volume discretization on unstructured grids is used. The separation between the largest and the smallest resolved scales is obtained through a variational projection operator and finite-volume cell agglomeration. The WALE subgrid scale model is used to account for the effects of the unresolved scales; in the VMS approach, it is only added to the smallest resolved ones. The capability of this methodology to accurately predict the aerodynamic forces acting on the cylinder and in capturing the flow features are evaluated for the different Reynolds numbers considered. The sensitivity of the results to different simulation parameters, viz. agglomeration level and numerical viscosity, is also investigated at Re = 20,000.     

Capacitive micromachined ultrasonic transducer (CMUT) arrays for medical imaging

Capacitive micromachined ultrasonic transducers (CMUTs) bring the fabrication technology of standard integrated circuits into the field of ultrasound medical imaging. This unique property, combined with the inherent advantages of CMUTs in terms of increased bandwidth and suitability for new imaging modalities and high frequency applications, have indicated these devices as new generation arrays for acoustic imaging. The advances in microfabrication have made possible to fabricate, in few years, silicon-based electrostatic transducers competing in performance with the piezoelectric transducers. This paper summarizes the fabrication, design, modeling, and characterization of 1D CMUT linear arrays for medical imaging, established in our laboratories during the past 3 years. Although the viability of our CMUT technology for applications in diagnostic echographic imaging is demonstrated, the whole process from silicon die to final probe is not fully mature yet for successful practical applications.     

Semi-transparent blotches removal from sepia images exploiting visibility laws

This paper presents a novel model for the removal of semi-transparent blotches on the digitized copy of sepia archive photographs. As these defects cannot be successfully eliminated by conventional interpolation methods, a proper combination of a novel visual distortion and multiresolution analysis is used for performing user-independent detection and restoration. Extensive experimental results and comparative studies show the potential of the proposed model in terms of visual quality and computational complexity.     

A polyfluoroalkyl imidazolium ionic liquid as iodide ion source in dye sensitized solar cells

We report on the use of a fluorinated imidazolium ionic liquid as a source of iodide ions in solvent-based electrolytes for DSSCs. Efficient dye regeneration and fast charge transport in the fluorinated electrolyte result in an overall improvement of the device performances compared to conventional hydrogenated ionic liquids.     

A Cumulative Effect of Food and Viruses to Trigger Celiac Disease (CD): A Commentary on the Recent Literature

Celiac disease (CD) is a type of inflammatory chronic disease caused by nutrients such as gliadin that induce a TC (T cell)-mediated response in a partially known genetical background in an environment predisposed to inflammation, including viruses and food. Various experimental and clinical observations suggest that multiple agents such as viruses and bacteria have some common, inflammatory pathways predisposing individuals to chronic inflammatory diseases including celiac disease (CD). More recently, a Western diet and lifestyle have been linked to tissue inflammation and increase in chronic inflammatory diseases. In CD, the gliadin protein itself has been shown to be able to induce inflammation. A cooperation between viruses and gliadin is present in vitro and in vivo with common mechanisms to induce inflammation. Nutrients could have also a protective effect on CD, and in fact the anti-inflammatory Mediterranean diet has a protective effect on the development of CD in children. The possible impact of these observations on clinical practice is discussed.