Optoelectronic devices towards monolithic integration

Starting from the present state-of-the-art of discrete devices up to the realization of monolithic semiconductor integrated prototypes, an overview of optoelectronic devices for telecommunications is given. Among discrete devices single frequency lasers, tunable and multi-sectionDFB lasers andPIN andAPD photodiode detectors are analysed, including the use of new technologies in progress for a second generation of devices. On the future perspective ofIBCN distribution networks, some economics of the hybrid and monolithic form of integration are attempted. Finally a short outline of the most recent achievements in monolithic integration is presented, taking into particular consideration the activities in this field byEEC ESPRIT andRACE programmes.     

Degradation of lincomycin in aqueous medium: Coupling of solar photocatalysis and membrane separation

The photocatalytic oxidation of a common antibiotic, the lincomycin was carried out in aqueous suspensions of polycrystalline TiO₂ Degussa P25 irradiated by sunlight. In order to improve the performance of the lincomycin degradation a hybrid system consisting of a solar photoreactor with the photocatalyst in suspension coupled with a membrane module, used to confine both photocatalyst and pollutants in the reaction environment, was tested.A preliminary study was carried out in order to determine some kinetics parameters of the drug photodegradation. The influence of initial substrate concentration on the lincomycin photooxidation rate was investigated. The photooxidation rate follows a pseudo-first order kinetics with respect to the lincomycin concentration under the used experimental conditions. The presence of the membrane reactor allows the catalyst separation and to operate in continuous mode as the membranes rejection for lincomycin and its oxidation products was quite high.     

BRAF Gene and Melanoma: Back to the Future

As widely acknowledged, 40–50% of all melanoma patients harbour an activating BRAF mutation (mostly BRAF V600E). The identification of the RAS–RAF–MEK–ERK (MAP kinase) signalling pathway and its targeting has represented a valuable milestone for the advanced and, more recently, for the completely resected stage III and IV melanoma therapy management. However, despite progress in BRAF-mutant melanoma treatment, the two different approaches approved so far for metastatic disease, immunotherapy and BRAF+MEK inhibitors, allow a 5-year survival of no more than 60%, and most patients relapse during treatment due to acquired mechanisms of resistance. Deep insight into BRAF gene biology is fundamental to describe the acquired resistance mechanisms (primary and secondary) and to understand the molecular pathways that are now being investigated in preclinical and clinical studies with the aim of improving outcomes in BRAF-mutant patients.     

Hydrogen sorption sites in the gallium containing hybrid catalysts used for the aromatization of light alkanes

Gallium species which were incorporated initially in the oxide form, were all in the (+3) oxidation state in the hybrid catalyst and exhibited two types of hydrogen chemisorption sites, s_hw and s_hs. The stronger sorption sites shs which predominated at higher gallium dispersion, corresponded probably to the most effective surface configuration for gallium in the aromatization ofn-butane.     

Manufacturing of polypropylene laminates and related structural reorganization in the crystalline phase

The conditions for obtaining recrystallization in more ordered modifications are described for an uniaxially oriented sample of isotactic polypropylene, annealed with fixed ends. These recrystallization conditions are related to the conditions of a lamination process.     

The kinetics of CO2 hydrogenation on a Rh foil promoted by titania overlayers

Submonolayer deposits of titania on a Rh foil have been found to increase the rate of CO₂ hydrogenation. The primary product, methane, exhibits a maximum rate at a TiO _x coverage of 0.5 ML which is a factor of 15 higher than that over the clean Rh surface. The rate of ethane formation displays a maximum which is 70 times that over the unpromoted Rh foil; however, the selectivity for methane remains in excess of 99%. The apparent activation energy for methane formation and the dependence of the rate on H₂ and CO₂ partial pressure have been determined both for the bare Rh surface and the titania-promoted surface. These rate parameters show very small variations as titania is added to the Rh catalyst. The methanation of CO₂ is proposed to start with the dissociation of CO₂ into CO_(a) and O_(a), and then proceed through steps which are identical to those for the hydrogenation of CO. The increase in the rate of CO₂ hydrogenation in the presence of titania is attributed to an interaction between the adsorbed CO, released by CO₂ dissociation, and Ti³⁺ ions located at the edge of TiO _x islands covering the surface. Differences in the effects of titania promotion on the methanation of CO₂ and CO are discussed in terms of the mechanisms that have been proposed for these two reactions.     

Lewis acidity as an explanation for oxide promotion of metals: implications of its importance and limits for catalytic reactions

Sub-monolayer quantities of metal oxides are found to influence CO hydrogenation, CO₂ hydrogenation, acetone hydrogenation, ethylene hydroformylation, ethylene hydrogenation, and ethane hydrogenolysis over Rh foils. The metal oxides investigated include AlOx, TiOx, VOx, FeOx, ZrOx, NbOx, TaOx, and WOx. Only those reactions involving the hydrogenation of C-O bonds are enhanced by the oxide overlayers. The coverage at which maximum rate enhancement occurs is approximately 0.5 ML for each oxide promoter. Titanium, niobium, and tantalum oxides are the most effective promoters. XPS measurements after reaction show that of the oxides studied titanium, niobium, and tantalum oxide overlayers are stable in the highest oxidation states. The trend in promotion effectiveness is attributed to the direct relationship between oxidation state and Lewis acidity. For the oxide promoters, bonding at the metal oxide/metal interface between the O-end of adsorbed CO and the Lewis acidic oxide is postulated to facilitate C-O bond dissociation and subsequent hydrogenation.     

Privacy leakage on the Web: Diffusion and countermeasures

Protecting privacy on the Web is becoming increasingly complicated because of the considerable amount of personal and sensitive information left by users in many locations during their Web browsing and the silent actions of third party sites that collect data, aggregate information and build personal profiles of Internet users in order to provide free and personalized services. On the other hand, most of people are unaware that their information may be collected online, and that, after their aggregation from multiple sources, could be used for secondary purposes, such as linked to allow identification, without user’s notice.     

Experience with model-based performance, reliability, and adaptability assessment of a complex industrial architecture

In this paper, we report on our experience with the application of validated models to assess performance, reliability, and adaptability of a complex mission critical system that is being developed to dynamically monitor and control the position of an oil-drilling platform. We present real-time modeling results that show that all tasks are schedulable. We performed stochastic analysis of the distribution of task execution time as a function of the number of system interfaces. We report on the variability of task execution times for the expected system configurations. In addition, we have executed a system library for an important task inside the performance model simulator. We report on the measured algorithm convergence as a function of the number of vessel thrusters. We have also studied the system architecture adaptability by comparing the documented system architecture and the implemented source code. We report on the adaptability findings and the recommendations we were able to provide to the system’s architect. Finally, we have developed models of hardware and software reliability. We report on hardware and software reliability results based on the evaluation of the system architecture.