Characterization of steel mill electric-arc furnace dust

In order to make a complete characterization of electric-arc furnace (EAF) dust, as hazardous industrial waste, and to solve its permanent disposal and/or recovery, bearing in mind both the volumes formed in the Croatian steel industry and experiences of developed industrial countries, a study of its properties was undertaken. For this purpose, samples of EAF dust, taken from the regular production process in the Zeljezara Sisak Steel Mill between December 2000 and December 2001, were subjected to a series of tests. The chemical composition of EAF dust samples was investigated by means of a several different analytical methods. The results from the chemical analysis show that the approximate order of abundance of major elements in EAF dusts is as follows: Fe, Zn, Mn, Ca, Mg, Si, Pb, S, Cr, Cu, Al, C, Ni, Cd, As and Hg. Granular-metric composition of single samples was determined by applying sieve separation. Scanning electron micro-structural examination of EAF dust microstructure was performed and results indicated that all twelve EAF dusts were composed of solid spherical agglomerates with Fe, Zn, Pb, O, Si and Ca as the principal element. The investigation of grain morphology and the mineralogical composition of EAF dust were taken by combination of high resolution Auger electron spectroscopy (HR AES), X-ray photoelectron spectroscopy (XPS) and X-ray powder diffraction analysis. The analysis of XPS-spectra determined the presence of zinc in the form of ZnO phase and the presence of lead in the form of PbO phase, i.e. PbSO3/PbSO4 forms. The results of the X-ray diffraction phase analysis show that the basis of the examined EAF dust samples is made of a mixture of metal oxides, silicates and sulphates. The metal concentration, anions, pH value and conductivity in water eluates was determined in order to define the influence of EAF dust on the environment.     

Content of polyphenolic constituents and antioxidant activity of some Stachys taxa

Seven Croatian Stachys taxa (S. alpina, S. officinalis, S. palustris, S. recta subsp. recta, S. recta subsp. subcrenata, S. salviifolia and S. sylvatica) have been investigated in order to determine their content of biologically active compounds (polyphenols, tannins, phenolic acids and flavonoids) as well as their antioxidant activity. All taxa tested had a high content of total polyphenols, medium content of total phenolic acids, and a rather low content of tannins and flavonoids. The total phenolic acids content correlated significantly with total polyphenols content and the content of polyphenols unadsorbed on hide powder. A low correlation between plant phenolic acids and tannins was observed. Methanolic, ethanolic and dichloromethane extracts were investigated using DPPH, lipid peroxidase and xanthine oxidase assays. The extracts showed no inhibitory effects against lipid peroxidation and xanthine oxidase, but they had the ability to scavenge DPPH. The most effective in the DPPH assay were methanolic extracts of S. recta sub. recta and S. palustris whose radical scavenging activity was higher then that of the reference rutin. A low correlation between radical scavenging capacities of extracts with total flavonoids content was observed. The results indicate that investigated Stachys taxa exhibit potent antiradical activity and therefore could be a potential material for extracting free radical scavengers.     

Miscibility in blends of sulfonylated poly(2,6-dimethyl-1,4-phenylene oxide) and poly(p-bromostyrene-co-o-bromostyrene)

Miscibility in blends of random copolymers of p-bromostyrene (pBrSt) and o-bromostyrene (oBrSt) [P(pBrSt-co-oBrSt)] with partially sulfonylated poly(2,6-dimethyl-1,4-phenylene oxide) (SPPO) have been studied by differential scanning calorimetry (DSC). For an SPPO of given degree of sulfonylation, a miscibility window in terms of the isomeric composition of the brominated copolymer was seen; the location and width of the window was a function of sulfonylation. In general, copolymers with a higher content of pBrSt exhibit miscibility with SPPOs with higher degrees of sulfonylation. Upon annealing to temperatures of 280° and 320°C, only small changes in the miscibility regime were observed. The miscibility behavior was analyzed on the basis of the mean-field theory in terms of the individual segmental interaction parameters. © 1994 John Wiley & Sons, Inc.     

Development and in vitro evaluation of surface modified poly(lactide-co-glycolide) nanoparticles with chitosan-4-thiobutylamidine

The objective of this study was to develop a nanoparticulate drug delivery system based on the surface modification of poly(lactide-co-glycolide) (PLGA) nanoparticles with a thiolated chitosan. PLGA nanoparticles were prepared by the emulsification-solvent evaporation method. Immobilization of chitosan to the surface of PLGA nanoparticles via amide bonds was mediated by a carbodiimide. Thiol groups were covalently bound to the chitosan surface of particles by reaction with 2-iminothiolane. Obtained nanoparticles were characterized in vitro regarding size, zeta potential, thiol group content, stability at different pH values, mucoadhesion, and drug release. Results demonstrated that the surface modification of PLGA nanoparticles with thiolated chitosan (chitosan-TBA) leads to nanoparticles of a mean diameter of 889.5 ± 72 nm and positive zeta potential of + 24.74 mV. The modified nanoparticles contained 7.32 ± 0.24 μmol thiol groups per gram nanoparticles. The size of nanoparticles was strongly influenced by the pH of the surrounding medium, being 925.0 ± 76.3 nm at pH 2 and 577.8 ± 66.7 nm at pH 7.4. Thiolated nanoparticles showed a 3.3-fold prolonged residence time on the mucosa and an unchanged release profile in comparison to unmodified PLGA nanoparticles. These data suggest that surface modified chitosan-TBA conjugate PLGA nanoparticles have the potential to be used as mucoadhesive drug delivery system.     

Solution properties of poly(fluorostyrene-co-chlorostyrene) copolymers. I. Light scattering,differential refractometry and viscometry

The weight-average molecular weights (M?_w) of nominally random, unfractionated copolymers of ortho- and para-fluorostyrene and ortho- and para-chlorostyrene were determined by light scattering measurements in tetrahydro-furan, toluene, carbon tetrachloride and chloroform. It was shown that there is no significant variation in measured M?_w in the various solvents, a finding indicating that the copolymers are not compositionally heterogeneous. Intrinsic viscosity measurements in the same solvents established a consistent relationship between [n] and M?_w despite the differences in copolymer compositions. It was not possible to establish a similar relationship between the second virial coefficient A₂ and M?_w. It was concluded that measurements of the specific refractive index increment could be used for determining copolymer composition if the measurements were performed in thermodynamically poorer solvents. The results established for the Mark-Houwink constant α, intrinsic viscosity, and A₂ values indicated that these solvated copolymer molecules are in a less expanded conformation than are polystyrene molecules of similar molecular weights in a given solvent.     

Development and In Vitro Evaluation of Surface Modified Poly(lactide-co-glycolide) Nanoparticles with Chitosan-4-Thiobutylamidine

ABSTRACT

The objective of this study was to develop a nanoparticulate drug delivery system based on the surface modification of poly(lactide-co-glycolide) (PLGA) nanoparticles with a thiolated chitosan. PLGA nanoparticles were prepared by the emulsification-solvent evaporation method. Immobilization of chitosan to the surface of PLGA nanoparticles via amide bonds was mediated by a carbodiimide. Thiol groups were covalently bound to the chitosan surface of particles by reaction with 2-iminothiolane. Obtained nanoparticles were characterized in vitro regarding size, zeta potential, thiol group content, stability at different pH values, mucoadhesion, and drug release. Results demonstrated that the surface modification of PLGA nanoparticles with thiolated chitosan (chitosan-TBA) leads to nanoparticles of a mean diameter of 889.5 ± 72 nm and positive zeta potential of + 24.74 mV. The modified nanoparticles contained 7.32 ± 0.24 μmol thiol groups per gram nanoparticles. The size of nanoparticles was strongly influenced by the pH of the surrounding medium, being 925.0 ± 76.3 nm at pH 2 and 577.8 ± 66.7 nm at pH 7.4. Thiolated nanoparticles showed a 3.3-fold prolonged residence time on the mucosa and an unchanged release profile in comparison to unmodified PLGA nanoparticles. These data suggest that surface modified chitosan-TBA conjugate PLGA nanoparticles have the potential to be used as mucoadhesive drug delivery system.     

Miscibility behaviour of sulfonylated poly(2,6-dimethyl-1,4-phenylene oxide) copolymers in the blends with poly(styrene-co-maleic anhydride) and with poly(α-methylstyrene-co-maleic anhydride)

Summary The miscibility behaviour of sulfonylated poly(2,6-dimethyl-1,4-phenylene oxide) of the different degree of sulfonylation blended with poly(styrene-co-maleic anhydride) or poly(-methylstyrene-co-maleic anhydride) was studied. The critical degree of sulfonylation for phase separation in these blends was found to be 55 mole % and 66 mole %, respectively. The miscibility behaviour was analyzed on the basis of the mean field treatment and studied by DSC.Dedicated to Professor Dragutin Fle in honor of his 70th birthday     

Permeation studies on freshly excised rat gastric mucosa: influence of pH

The objective of this study was to evaluate the influence of pH on the permeation of model drugs through freshly excised rat stomach. Additionally, the capability of excised gastric mucosa to maintain an acidic pH was assessed. In vitro permeation studies were performed in Ussing-type diffusion chambers with rat stomach using fluorescence-labeled bacitracin (bac-FITC), sodium fluorescein (NaFlu), propranolol HCl, and cimetidine as model drugs. The pH was adjusted to pH 1, 2, and 6.8 in the donor chamber and pH 7.4 in the acceptor chamber. The study demonstrated that both, the fore stomach and the glandular gastric mucosa, are capable of maintaining an acidic pH of 1-1.2 in the donor chamber. P(app) (permeation coefficients) were found to be 1.4?±?0.6 ×·10(-7) and 7.6?±?0.7 ×·10(-7) for bac-FITC and 3.3?±?1.5 ×·10(-7) and 2.4?±?0.6 ×·10(-6) cm/sec for NaFlu at pH 2 and 6.8, respectively, in the glandular stomach. In order to evaluate the effect of pH on the integrity of paracellular space, propranolol as high-permeability drug and cimetidine as low-permeability drug were chosen. The P(app) of propranolol HCl was determined to be 5.9?±?0.3 ×·10(-7) and 1.1?±?0.7 ×·10(-6) cm/sec at pH 2 and 6.8, respectively, in the glandular stomach. Cimetidine showed a permeability of 1.4?±?0.4 ×·10(-5) and 9.6?±?2.3 ×·10(-6) cm/sec at pH 2 and 6.8. Results provide essential basic information for the development of gastric drug delivery systems.     

Compatibility of poly(2,6-dimethyl-1,4-phenylene oxide)/poly(fluorostyrene-co-chlorostyrene) blends

The compatibility of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) with random copolymers of ortho- and para-fluorostyrene as well as with ortho- and para-chlorostyrene of various copolymer compositions was examined. The compatibility was studied by DSC and visual observation of film clarity. It was found that copolymers of ortho-fluorostyrene with para-chlorostyrene containing 15–74 mol % p-CIS are compatible with PPO in all proportions. Compatibility of the PPO/poly-(ortho-fluorostyrene-co-ortho-chlorostyrene) system was observed for copolymers containing between 15 and 36 mol % ortho-chlorostyrene. Copolymers of para-fluorostyrene with para-chlorostyrene, as well as copolymers of para-fluorostyrene with ortho-chlorostyrene appear to be incompatible with PPO at 210°C.