The kinetic and thermodynamic analysis of ultrasound-extraction of minerals from aerial parts of white lady's bedstraw (Galium mollugo L.)

The present paper deals with the extraction of some minerals (potassium, calcium and magnesium) from ground, dried aerial parts of white lady's bedstraw (Galium mollugo L.) using an aqueous ethanol solution (50% by volume) at different temperatures (from 23 to 40 °C) in the presence and absence of ultrasound. The main goal was to establish the kinetics and the thermodynamics of the two extraction processes. A phenomenological model involving simultaneous washing and diffusion was proved for both ultrasound-assisted and silent extraction of the minerals. The minerals extraction both in the presence and the absence of ultrasound is endothermic and irreversible since the enthalpy change and the entropy change are positive in the ranges of extraction temperature applied. The Gibbs free energy change for the extraction of minerals is negative, indicating that the process is feasible and spontaneous. The minerals yield increased by a factor of 1.02–1.06 and 1.14–1.27 in the absence and the presence of ultrasound, respectively for every 10 °C rise in temperature.     

Mechanochemically induced amorphous/crystalline phase transition in the Bi4Ti3O12 compound

Concurrent milling of Bi₄Ti₃O₁₂ was carried out in a planetary ball mill with hardened-steel 13 or 6 mm diameter balls with a goal to investigate how the system responds to the constrains imposed by milling. Milling intensity for various milling parameters was derived from the electrical power measurement. The reverse amorphous ↔ crystalline phase transition induced by milling is governed by impact energy and frequency. Below a certain threshold value of impact energy crystallization does not occur, whereas a higher impact frequency accelerates amorphization. Mechanochemical reactions are predominantly discrete processes, which occur at the moment of impact.     

Hydrodynemics of a cocurrent upflow liquid–liquid reciprocating plate reactor for homogeneously base-catalyzed methanolysis of vegetable oils

Hydrodynamics of a continuous cocurrent two-phase upflow reciprocating plate reactor (RPR) for homogeneously base-catalyzed methanolysis of sunflower oil was studied. Here, methanol constituted the dispersed phase and sunflower oil was the continuous phase. The measurements were performed in both the non-reactive (methanol–sunflower oil) and reactive (sunflower oil–methanol–KOH) systems. The main goal was to define the effects of the vibration intensity and the important reaction operating conditions on the pressure fluctuation at the reactor bottom, the power consumption, the dispersed phase holdup, the Sauter-mean drop diameter and the specific interfacial area. The power consumption under batch, single- and two-phase flow was proved to depend on the vibration intensity. The Sauter-mean drop diameter was found to depend on the specific power consumption in accordance with the turbulent model due to the turbulent energy dissipation in well-mixed regions around perforated plates. The simplified correlation of Kumar and Hartland could be used for estimating the Sauter-mean drop diameter. The energy dissipation due to reciprocating plate motion and the superficial dispersed phase velocity affected the dispersed phase holdup and the specific interfacial area. The present results are crucial for designing RPRs for application in continuous base-catalyzed methanolysis of vegetable oils.     

Kinetics of sunflower oil methanolysis catalyzed by calcium oxide

The methanolysis of sunflower oil was studied in the presence of CaO previously calcined at various temperatures and the optimal temperature for CaO calcination was determined. The sigmoidal process kinetics was explained by the initial triglyceride (TG) mass transfer controlled region, followed by the chemical reaction controlled region in the latter reaction period. The TG mass transfer limitation was due to the small available active specific catalyst surface, which was mainly covered by adsorbed molecules of methanol. In the later phase, the adsorbed methanol concentration decreased, causing the increase of both the available active specific catalyst surface and the TG mass transfer rate, and the chemical reaction rate become smaller than the TG mass transfer rate.     

A new kinetic model for the common juniper essenstial oil extraction by microwave hydrodistillation

The main objective of the present study was to model the kinetics of essential oil extraction from swelled ground juniper berries by classic hydrodistillation (HD) and microwave-assisted hydrodistillation (MAHD). A new phenomenological kinetic model was developed on the basis of the juniper essential oil extraction mechanism that assumed three mass transfer processes occurring simultaneously: washing, unhindered diffusion and hindered diffusion. The new model was compared to the existing kinetic models. Among the tested models, the new model had the smallest mean relative percentage deviation and the highest corrected Akaike information criterion value. In addition, that, the new model was verified for HD and MAHD of essential oils from some other plant materials. On the basis of the above-mentioned facts, the new model can be recommended for modeling the kinetics of essential oil extraction by both HD and MAHD.     

Modeling of biodiesel production: Performance comparison of Box-Behnken,face central composite and full factorial design

The performances of the response surface methodology (RSM) in connection with the Box-Behnken, face central composite or full factorial design (BBD, FCCD or FFD, respectively) were compared for the use in modeling of the NaOH-catalyzed sunflower oil ethanolysis. The influence of temperature, catalyst loading, and ethanol-to-oil molar ratio (EOMR) on fatty acid ethyl esters (FAEE) content was evaluated. All three multivariate strategies were efficient in the statistical modeling and optimization of the influential process variables but BBD and FCCD realization involved less number of experiments, generating smaller costs, requiring less work and consuming shorter time than the corresponding FFD. All three designs resulted in the same optimal catalyst loading (1.25% of oil) and EOMR (12:1). The reduced two-factorinteraction (2FI) models based on the BBD and FCCD defined a range of optimal reaction temperature (25℃-75℃) and 25℃, respectively while the same model based on the 3³ FFD appointed 75℃. The predicted FAEE content of about 97%-98.0% was close to the experimentally obtained FAEE content of about 97.0%-97.6% under the optimal reaction conditions. Therefore, the simpler BBD or FCCD might successfully be applied for statistical modeling of biodiesel production processes instead of the more extensive, more laborious and more expensive FFD.     

The Effect of Deflazacort Treatment on the Functioning of Skeletal Muscle Mitochondria in Duchenne Muscular Dystrophy

Duchenne muscular dystrophy (DMD) is a severe hereditary disease caused by a lack of dystrophin, a protein essential for myocyte integrity. Mitochondrial dysfunction is reportedly responsible for DMD. This study examines the effect of glucocorticoid deflazacort on the functioning of the skeletal-muscle mitochondria of dystrophin-deficient mdx mice and WT animals. Deflazacort administration was found to improve mitochondrial respiration of mdx mice due to an increase in the level of ETC complexes (complexes III and IV and ATP synthase), which may contribute to the normalization of ATP levels in the skeletal muscle of mdx animals. Deflazacort treatment improved the rate of Ca²⁺ uniport in the skeletal muscle mitochondria of mdx mice, presumably by affecting the subunit composition of the calcium uniporter of organelles. At the same time, deflazacort was found to reduce the resistance of skeletal mitochondria to MPT pore opening, which may be associated with a change in the level of ANT2 and CypD. In this case, deflazacort also affected the mitochondria of WT mice. The paper discusses the mechanisms underlying the effect of deflazacort on the functioning of mitochondria and contributing to the improvement of the muscular function of mdx mice.