Indomethacin reduces contraction of isolated non-pregnant human uterine artery induced by prostaglandin F2 alpha

The purpose of this study was to explore whether cyclooxygenase products derived from endothelium or vascular smooth muscle participate in the response of human uterine artery to prostaglandin F2 alpha. Experiments were performed using human uterine arterial rings. Prostaglandin F2 alpha (0.4 nM-1 microM) induced contraction of human uterine arteries with both intact and denuded endothelium with similar potency and efficacy (pD2 values: 7.93 +/- 0.01 and 8.07 +/- 0.03 for vessels with and without endothelium respectively; maximal response values: 89.1 +/- 4.7% and 92.3 +/- 3.8% for vessels with and without endothelium respectively). Indomethacin (10 microM) significantly suppressed the maximum effects of prostaglandin F2 alpha and induced a shift towards the right of the prostaglandin F2 alpha concentration-response curves, regardless of the endothelial condition. On the other hand, in both types of preparations, OKY-046 (10 microM), an inhibitor of thromboxane synthesis, did not affect prostaglandin F2 alpha-induced contraction of human uterine arteries. It is concluded that in human uterine artery prostaglandin F2 alpha-induced contraction is mediated, at least in part, through constrictor prostanoid(s) of vascular smooth muscle origin that is not thromboxane A2.     

Rigid osteosynthesis with the AO plate and Phemister''s spongioplasty in secondary treatment of diaphyseal gunshot fractures

To clarify the histogenesis and differentiation potential of central neurocytoma, a pathological investigation of seven tumors from three patients was conducted using immunohistochemistry and ultrastructural analysis in addition to systematic in vitro studies. Six tumors were studied immunohistochemically and five were examined ultrastructurally. All cases that were immunostained were positive for synaptophysin in nuclear-free neuropil islands. In five tumors, a few tumor cells, in addition to reactive astrocytes, were positive for glial fibrillary acidic protein (GFAP). Vimentin staining was also positive in a few tumor cells of five specimens. Neurofilament staining was always negative. All cases for which ultrastructure was examined showed various synaptic abnormalities. Cultured cells were subdivided into three distinct tumor cell types: neuronal cells which stained for neurofilament proteins with neurosecretory granules; small flat undifferentiated cells with a high nuclear-cytoplasmic ratio and scant cytoplasmic organelles; and small round or multipolar astrocytic cells with 10-nm intermediate filaments which stained for GFAP. Our tissue culture studies disclosed that cultured neurocytoma cells form a cellular mosaic similar to subependymal plate layers that are composed of mitotically active cells, neurons and glia.     

The influence of selenium and neuroleptics on the rat brain nuclear regulatory mechanism in carcinogenesis

alpha-Crystallins possess molecular chaperone properties and are one of the most abundant of the lenticular proteins. Posttranslational modifications of these proteins have been implicated as a possible etiology of human cataracts. This article will review current knowledge concerning the effects of known posttranslational modifications upon the molecular chaperone properties and aggregation behavior of alpha-A and alpha-B crystallin. Based upon these effects, experimental approaches will be discussed that may be useful in the development of reagents that may selectively inhibit the cataractogenic process in the aging human lens.     

The properties of electroactive ruthenium oxide coatings supported by titanium-based ternary carbides

Electroactive oxide coatings on titanium, known in industrial chlorine production as dimensionally stable anodes (DSA), are of limited service life owing to the dissolution of active oxide, but also due to low corrosion stability of titanium, at high anodic potentials and elevated temperatures. In order to improve the anode stability, ternary carbide, Ti₃SiC₂, could be a promising material for the coating support, since chemical corrosion stability of Ti₃SiC₂ is significantly higher if compared to Ti. In this work, the possibility of the sol-gel preparation of RuO₂-TiO₂ coating on Ti₃SiC₂ is investigated and comparison of the basic characteristics of sol-gel processed oxide coating, Ru_0.5Ti_0.5O₂, applied onto Ti₃SiC₂ and Ti, is reported. Microscopic investigation of the coating surface showed that considerably less cracked coating is formed onto the Ti₃SiC₂ support. Slightly higher voltammetric currents are registered for Ti₃SiC₂-supported coating in H₂SO₄ and NaCl solution. The activity for chlorine evolution is higher, while the currents of oxygen evolution reaction are lower for Ru_0.5Ti_0.5O₂/Ti₃SiC₂ anode in comparison to Ru_0.5Ti_0.5O₂/Ti anode. Even though these preliminary results on the basic electrochemical properties of Ru_0.5Ti_0.5O₂/Ti₃SiC₂ anode and chemical stability of Ti₃SiC₂ are promising, the accelerated stability test in NaCl solution showed that coated Ti₃SiC₂ is not anodically stable and lasts considerably shorter than Ru_0.5Ti_0.5O₂/Ti anode prepared and tested under the same conditions.     

Functionalized oligopolysiloxanes by heterogeneously catalyzed equilibration polymerization reactions

Summary A new general procedure for preparation of functionalized oligopolysiloxanes of predetermined molecular weight is described. It utilizes heterogeneously catalyzed siloxane equilibration polymerization reactions which do not require troublesome and sometimes difficult post-preparative work-up procedures usually encountered with the well known homogeneously catalyzed corresponding reactions. The method is described using as example the preparation of , -telechelic vinyldimethylsiloxy-oligopolydimethylsiloxanes from octamethylcyclotetrasiloxane and 1,3-divinyltetramethyldisiloxane, but reference to the preparations of trimethylsiloxy-, dimethylsiloxy-and carboxypropyldimethylsiloxyoligopolydimethylsiloxanes, oligopolymethylhydridosiloxanes or their copolymers is also made.     

The holy grail of microfluidics: sub-laminar drag by layout of periodically embedded microgrooves

The sub-laminar drag effect of microgroove surfaces was studied numerically in a steady two-dimensional channel flow at subcritical Reynolds numbers. Considerations are restricted to grooves of a few viscous length scales in depth, which are assumed not to promote the laminar to turbulent transition process. It was found that the drag reduction effect is due to the layout of grooves with respect to the flow direction and contour geometry. Results of computations show that for grooves of curved contour placed normal to the flow direction, drag arising from viscous and pressure forces is modulated due to the functional dependence of forces on the surface area projected in the flow direction. Such a groove layout leads to a large skin-friction reduction, but a comparable increase in pressure drag results in sub-laminar drag if drag over flat surface is considered as a reference. For a curved groove contour, the drag reduction increases with increasing Reynolds number and reaches about 5 % at Reynolds numbers approaching critical.     

Virtual Mechatronic/Robotic laboratory – A step further in distance learning

The implementation of the distance learning and e-learning in technical disciplines (like Mechanical and Electrical Engineering) is still far behind the grown practice in narrative disciplines (like Economy, management, etc.). This comes out from the fact that education in technical disciplines inevitably involves laboratory exercises and this fact drastically increases the complexity of a potential e-learning system. New approach and new specific knowledge are needed to develop such a system. We expect to meet the requirements of distance learning by developing the software-based laboratory exercises, i.e., a virtual laboratory. To fully substitute a physical system like laboratory equipment, one must emulate its full dynamics. The mathematical model in the form of differential equations will be applied to calculate dynamics and provide the data that would otherwise be measured on a physical system – this means simulation.     

Morphometric and some immunohistochemical characteristics of human choroids plexus stroma and psammoma bodies

Psammoma bodies (PBs) are one of many choroids plexus aging changes. The aim of our research was to perform the quantification of PBs' presence in human choroids plexus stroma, as well as to evaluate the characteristics of choroids plexus stroma in cases in which PBs were present. Afterwards, the observations of the histochemical analysis would be confirmed by immunohistochemical analysis. Choroid plexuses of 30 cadavers were used for the histochemical and, choroids plexuses of 15 cadavers in which PBs' presence was confirmed during the histochemical analysis, were used as material for the immunohistochemical analysis. Light microscopy, histochemical, immunohistochemical, and morphometric method were applied during the study. Classification of the cases was performed by cluster analysis. We observed increase of choroids plexus PBs' presence during the aging process. But this increase is not linear. Their presence is the largest in the second cluster that is younger than the third and older than the first. Nuclear morphometric parameters of the stroma in these cases showed that the cellular composition in this cluster is different than in other two and, that contain larger number of lymphoid cells. Immunohistochemical analysis showed PBs' positive reaction on vimentin, CD45R0, and LCA markers, while in their vicinity, as well as inside them, numerous T-cells were observed. So, the presence of CD45R0 and LCA-positive T cells, PBs' positive reaction on the same markers, indirectly connect these cells with PBs' formation process.     

Mechanical and fracture behavior of powder metalurgy processed Ti3Al-based alloys

This work considers structural and compression mechanical properties of three Ti₃Al-based alloys processed by powder metallurgy. Mechanically alloyed powders were compacted by hot-pressing to non-porous homogenous compacts. Prior to compression tests, all compacts were homogenized by a solution treatment at 1050°C (α + β region) for 1h, followed by water quenching. The compression tests were performed from room temperature to 500°C in vacuum at a strain rate of 2.4 × 10⁻³ s⁻¹. Detailed microstructural characterization has been evaluated by scanning electron microscopy (SEM), followed by electron dispersive spectroscopy (EDS) and X-ray diffraction analysis. Fracture topography was examined by SEM. The Ti₃Al-Nb alloy exhibits the highest ductility in the whole temperature range, whereas addition of Mo to Ti₃Al-Nb alloy yields the highest ultimate compression strength. A correlation between ductility and the fracture mode exists for all materials.     

MALDI Q-TOF CID MS for Diagnostic Ion Screening of Human Milk Oligosaccharide Samples

Human milk oligosaccharides (HMO) represent the bioactive components of human milk, influencing the infant’s gastrointestinal microflora and immune system. Structurally, they represent a highly complex class of analyte, where the main core oligosaccharide structures are built from galactose and N-acetylglucosamine, linked by 1–3 or 1–4 glycosidic linkages and potentially modified with fucose and sialic acid residues. The core structures can be linear or branched. Additional structural complexity in samples can be induced by endogenous exoglycosidase activity or chemical procedures during the sample preparation. Here, we show that using matrix-assisted laser desorption/ionization (MALDI) quadrupole-time-of-flight (Q-TOF) collision-induced dissociation (CID) as a fast screening method, diagnostic structural information about single oligosaccharide components present in a complex mixture can be obtained. According to sequencing data on 14 out of 22 parent ions detected in a single high molecular weight oligosaccharide chromatographic fraction, 20 different oligosaccharide structure types, corresponding to over 30 isomeric oligosaccharide structures and over 100 possible HMO isomers when biosynthetic linkage variations were taken into account, were postulated. For MS/MS data analysis, we used the de novo sequencing approach using diagnostic ion analysis on reduced oligosaccharides by following known biosynthetic rules. Using this approach, de novo characterization has been achieved also for the structures, which could not have been predicted.