Manganese ferrite-polyaniline hybrid materials: Electrical and magnetic properties

Magnetic MnFe₂O₄ nanopowders were synthesized by an original solvothermal method in the absence and in the presence of tetra-n-butylammonium bromide (TBAB) and Tween 80 (TW) as surfactants. Manganese ferrite/polyaniline (PANI) hybrid materials were synthesized by in situ polymerization of aniline on the surface of MnFe₂O₄ using ammonium persulfate as oxidant. The purpose of the study was to investigate the influence of the two surfactants on the properties of the MnFe₂O₄ powders and of their composites with PANI. The specific surface area, the cumulative surface area of pores and the cumulative volume of pores are influenced by the nature of surfactant in case of MnFe₂O₄ powders and are higher by comparison to those of the MnFe₂O₄/PANI hybrid materials. The values of saturation magnetization in case of MnFe₂O₄ powders are higher than those of the hybrid materials and are not influenced by the surfactant nature. These features revealed that MnFe₂O₄ powders can be efficiently used as adsorbents for the purification of wastewaters. The values of the electrical conductivity of the composites exhibit a significant increase in comparison to the MnFe₂O₄ powders and depend on the surfactant nature. The highest value of electrical conductivity was achieved by the composite obtained using Tween 80 as surfactant (σ_DC = 54.5·10^?5S?m^?1) which was close to that of PANI (σ_DC = 61.2·10^?5 S?m^?1). The fact that the magnetic and electric properties of the synthesized MnFe₂O₄/PANI composites can be changed by design, demonstrate the high potential of these materials to be used in magneto-electric applications.     

Intergenerational Metabolomic Analysis of Mothers with a History of Gestational Diabetes Mellitus and Their Offspring

Shared metabolomic patterns at delivery have been suggested to underlie the mother-to-child transmission of adverse metabolic health. This study aimed to investigate whether mothers with gestational diabetes mellitus (GDM) and their offspring show similar metabolomic patterns several years postpartum. Targeted metabolomics (including 137 metabolites) was performed in plasma samples obtained during an oral glucose tolerance test from 48 mothers with GDM and their offspring at a cross-sectional study visit 8 years after delivery. Partial Pearson’s correlations between the area under the curve (AUC) of maternal and offspring metabolites were calculated, yielding so-called Gaussian graphical models. Spearman’s correlations were applied to investigate correlations of body mass index (BMI), Matsuda insulin sensitivity index (ISI-M), dietary intake, and physical activity between generations, and correlations of metabolite AUCs with lifestyle variables. This study revealed that BMI, ISI-M, and the AUC of six metabolites (carnitine, taurine, proline, SM(-OH) C14:1, creatinine, and PC ae C34:3) were significantly correlated between mothers and offspring several years postpartum. Intergenerational metabolite correlations were independent of shared BMI, ISI-M, age, sex, and all other metabolites. Furthermore, creatinine was correlated with physical activity in mothers. This study suggests that there is long-term metabolic programming in the offspring of mothers with GDM and informs us about targets that could be addressed by future intervention studies.     

Effects of seat slope and hip flexion on spinal angles in sitting

Lumbar and thoracic spinal angles of 25 male and 25 female subjects were measured in four sitting postures, with standing angles used as reference. Subjects sat with either 90 deg or 65 deg of hip flexion on either flat or forward-sloping seats. Lumbar kyphosis was greatest when the flat seat/90-deg posture was adopted and least when the sloping seat/65-deg posture was adopted. The opposite was observed for the thoracic angles, and intermediate results were observed for the other two sitting postures. No statistically significant interactions were observed among seat slope, hip flexion, and subject sex. The findings are discussed with reference to the anatomy of sitting and factors influencing pelvic tilt and the implications for the ergonomic design of chairs.     

Rationalisierung des Zeichnungswesens im Chemie-Apparatebau

Rationalizing drawings for chemical apparatus . For small and medium-sized manufacturers of apparatus, producing drawings may constitute a disproportionate waste of time and personnel, particularly when no new designs are involved but only modification or improvement of drawings supplied by the customer. One possibility for rationalizing drawing is to simplify the old-fashioned approach by using symbols for frequently drawn or standard items, or by listing alphanumerically. This presumes a kind of systematization permitting determination of those symbols and their reasonable use, as well facilitating rationalization by means of data processing. There are different approaches to computer-aided drawing (from computer controlled drawing-board to interactive screens); here a CAD programme is presented which was especially developed for graphic presentation of chemical apparatus, and which can be used without learning a programming language.     

Triple tangent flank milling of ruled surfaces

This paper presents a positioning strategy for flank milling ruled surfaces. It is a modification of a positioning method developed by Bedi et al. [Comput Aided Des 35 (2003) 293]. A cylindrical cutting tool is initially positioned tangential to the two boundary curves on a ruled surface. Optimization is used to move these tangential points to different curves on the ruled surface to reduce the error. A second optimization step is used to additionally make the tool tangent to a rule line, further reducing the error and resulting in a tool position, where the tool is positioned tangential to two guiding rails and one rule line. The resulting surface has 88% less under cutting than the method of Bedi et al.     

Implications of spatial aggregation of parasites for the population dynamics in host-parasite interaction

Some aspects of the widely observed over-dispersed pattern of the distribution of parasites within the host population are examined. It has been established in the parasitological literature that most hosts usually harbour few parasites, while only few hosts harbour a large proportion of the parasite population. Factors that may influence the pattern of distribution of parasites, the relation between the level of parasite aggregation and the prevalence of infection, and changes in this level of aggregation as a function of host age are analysed. Factors which determine the diversity of species in parasite communities are presented, and aspects of exploitative and interference competition among parasites and their relations with biological control procedures are also considered. Attention is also focused on the regulatory and destabilizing processes influencing the dynamic behaviour of host-parasite population interactions.     

Imaging of the optic disc and retinal nerve fiber layer: the effects of age, optic disc area, refractive error, and gender.

We cross-sectionally examined the relationship between age, optic disc area, refraction, and gender and optic disc topography and retinal nerve fiber layer (RNFL) measurements, using optical imaging techniques. One eye from each of 155 Caucasian subjects (age range 23.0-80.8 y) without ocular pathology was included. Measurements were obtained by using the Heidelberg Retina Tomography (HRT), the GDx Nerve Fiber Analyzer, and the Optical Coherence Tomograph (OCT). The effects of age were small (R2 < 17%) and were limited to specific HRT, GDx, and OCT parameters. Disc area was significantly associated with most HRT parameters and isolated GDx and OCT parameters. Refraction and gender were not significantly associated with any optic disc or RNFL parameters. Although effects of age on the optic disc and RNFL are small, they should be considered in monitoring ocular disease. Optic disc area should be considered when cross-sectionally evaluating disc topography and, to a lesser extent, RNFL thickness.     

Passive navigation as a pattern recognition problem

The most basic visual capabilities found in living organisms are based on motion. Machine vision, of course, does not have to copy animal vision, but the existence of reliably functioning vision modules in nature gives us some reason to believe that it is possible for an artificial system to work in the same or a similar way. In this article it is argued that many navigational capabilities can be formulated as pattern recognition problems. An appropriate retinotopic representation of the image would make it possible to extract the information necessary to solve motion-related tasks through the recognition of a set of locations on the retina. This argument is illustrated by introducing a representation of image motion by which an observer's egomotion could be derived from information globally encoded in the image-motion field. In the past, the problem of determining a system's own motion from dynamic imagery has been considered as one of the classical visual reconstruction problems, wherein local constraints have been employed to compute from exact 2-D image measurements (correspondence, optical flow) the relative 3-D motion and structure of the scene in view. The approach introduced here is based on new global constraints defined on local normal-flow measurements—the spatio-temporal derivatives of the image-intensity function. Classifications are based on orientations of normal-flow vectors, which allows selection of vectors that form global patterns in the image plane. The position of these patterns is related to the 3-D motion of the observer, and their localization provides the axis of rotation and the direction of translation. The constraints introduced are utilized in algorithmic procedures formulated as search techniques. These procedures are very stable, since they are not affected by small perturbations in the image measurements. As a matter of fact, the solution to the two directions of translation and rotation is not affected, as long as the measurement of the sign of the normal flow is correct.Part of this work was accomplished while the author was visiting the Royal Institute of Technology, Stockholm, Sweden. The research was supported in part by ARPA, ONR, and Swedish National Science Foundation.     

Retention of gallium ions from acidic solutions by pyridine strong‐base anion exchangers

Using the batch method, the retention of Ga(III) from HCl solutions by two gel‐type pyridine strong‐base anion exchangers containing 1‐methyl‐ or 1‐butyl‐4‐vinylpyridinium chloride structural units, called S₁ and S₂ resins, respectively, was studied. The influence of the HCl and Ga(III) concentrations as well as of the contact time between the resin and the liquid phase was investigated. The parameters, which characterize the retention process, were estimated using Langmuir and Freundlich isotherms. Both resins exhibited a higher affinity for gallium ions from a 6M HCl solution. According to Langmuir isotherms, maximum retention capacities of 44.44 and 60 mg Ga(III)/g dry resin for the S₁ and S₂ resins, respectively, were obtained. Freundlich isotherms provide additional proof for a higher affinity of the S₂ resin for Ga(III) from HCl solutions. It is clear that the substituent length increase on N⁺ atoms led to an increasing affinity of the pyridine strong base anion exchangers toward Ga(III). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3440–3444, 2002