Analysis of phosphorus removal and anaerobic selector performance in a full-scale activated sludge process in Singapore.

This paper analyses the performance of the anaerobic selector (A/O process) in a full-scale activated sludge process receiving mostly industrial sewage discharge (> 60%) in Singapore. In addition to the sludge settleability, enhanced biological phosphorus removal (EBPR) was studied. The sludge volume index (SVI) reduced from 200 to 80 ml g(-1) and foaming was suppressed significantly, indicating the effectiveness of the anaerobic selector in improving sludge settleability. The phosphorus removal efficiency was 66%, and 7.5 mg HAc-COD was consumed per mg PO4(3-) -P removed. In the anaerobic compartment, 31% of the SCOD and 73% of the acetic acid in the settled sewage were removed with PO4(3-) -P release of 14.1 mg PO4(3-)-P l(-1). The linear correlation between PO4(3-) -P release in the anaerobic compartment and PO4(3-) -P uptake in the aerobic compartment indicates that there is about 0.8 mg PO4(3-) -P release in the anaerobic compartment per mg PO34(3-) -P uptake in the aerobic compartment. The fates of volatile fatty acids (VFAs) and its short chain acids (SCAs) in the process were studied and discussed.     

The effect of OPWF filler on impact strength of glass-fiber reinforced epoxy composite

In the present study, oil palm wood flour (OPWF) particles with less than 250 μm sizes have been used as filler materials in the woven-glass-fiber reinforced epoxy composite. The hybrid composites were fabricated using a hand lay-up method and cured at room temperature under a compressive load of 196 N (20 kg). The OPWF of 2.5 to 10 parts per hundred (pph) by weight was used to evaluate its effect on impact strength of the hybrid composites at a range of temperature from −50 to 50 °C. The impact strength, evaluated using V-notch Charpy method, showed reduction with increasing filler content up to 5 pph and then the strength increment in those composites containing more than 5 pph OPWF. More severe damages were found in specimens with higher filler contents resulting higher energy absorption during impact. The composites with a large amount of OPWF particles deflected crack propagation paths or created obstacles at the crack tips and increased toughness of the composites. The impact strength was found to decrease when the samples fractured at subzero temperatures and this happened because of the reduction of the matrix ductility at lower temperatures.     

煤粉粒度对高炉风口前燃烧性能的影响

安钢炼铁厂在喷吹瘦煤后，将小于0．074mm的比例由70％放宽到30％，使磨煤能力提高了21％。采用自行设计的风口取样器，研究了风口前气体成分和煤粉燃烧率的变化。当煤粉粒度变粗后，风口前循环区变长，放宽煤粉粒度与高富氧、高风温配合，能使高炉得到较好的经济效益。     

Design aspects of planar and conventional SMPS transformer: a cost benefit analysis

The intent of this paper is to design a high-frequency transformer that is to be incorporated into the DC/DC pulsewidth-modulated switch-mode power supplies by two different technical approaches: a conventional wound-coil magnetic using copper wires, and a planar magnetic with layered copper tracks on laminated printed circuit board. Comparisons will be made between the two approaches in terms of profile: mounting height and surface area, and performance: power losses and efficiency. Other indicators like temperature rise and leakage inductance that causes electromagnetic interference, and cost, materials, and process fluency are also to be looked into. A sandwiched configuration for primary and secondary windings is proposed for the planar type. Issues arising and typical phenomena encountered will be discussed in detail. Primarily, the dominating factor in performance, cost effectiveness, or circuit compactness that restrains the choice of a particular type is to be evaluated.     

Computers for symbolic processing

A detailed survey on the motivations, design, applications, current status, and limitations of computers designed for symbolic processing is provided. Symbolic processing computations are performed at the word, relation, or meaning levels, and the knowledge used in symbolic applications may be fuzzy, uncertain, indeterminate, and ill represented. Various techniques for knowledge representation and processing are discussed from both the designers' and users' points of view. The design and choice of a suitable language for symbolic processing and the mapping of applications into a software architecture are then considered. The process of refining the application requirements into hardware and software architectures is treated, and state-of-art sequential and parallel computers designed for symbolic processing are discussed     

Purification and renaturation of recombinant human lymphotoxin (tumour necrosis factor beta) expressed in Escherichia coli as inclusion bodies

High level expression of recombinant human tumour necrosis factor β (rh TNF-β) in Escherichia coli results in the formation of two portions of protein, namely soluble active protein and insoluble protein which is inactive and aggregates in the form of inclusion bodies (IBs). In this study, a procedure for purification and renaturation of rh TNF-β from inclusion bodies has been designed and verified experimentally with a product purity of more than 90% and a recovery of about 30%. The procedure includes washing of IBs with specific wash buffer (Triton X-100/EDTA/lysozyme/PMSF), their solubilization with 8 mol dm^?3 alkaline urea, purification with ion-exchange columns, refolding with renaturation buffer and finally concentration and desalination with an ultrafiltration membrane. The characteristics of the renatured protein were identical with those of purified protein from the soluble fraction as demonstrated by (1) SDS-PAGE, (2) cytotoxic activity on mouse L929 cells, (3) N-terminal amino acid sequence, and (4) gel filtration chromatography.     

Forecasting Canadian nuclear power station construction costs

Because of the huge volume of capital required to construct a modern electric power generating station, investment decisions have to be made with as complete an understanding of the consequences of the decision as possible. This understanding must be provided by the evaluation of future situations. A key consideration in an evaluation is the financial component. This paper attempts to use an econometric method to forecast the construction costs escalation of a standard Canadian nuclear generating station (NGS). A brief review of the history of Canadian nuclear electric power is provided. The major components of the construction costs of a Canadian NGS are studied and summarized. A database is built and indexes are prepared. Based on these indexes, an econometric forecasting model is constructed using an apparently new econometric methodology of forecasting modelling. Forecasts for a period of 40 years are generated and applications (such as alternative scenario forecasts and range forecasts) to uncertainty assessment and/or decision-making are demonstrated. The indexes, the model, and the forecasts and their applications, to the best of the author's knowledge, are the first for Canadian NGS constructions.     

Preparation and properties of water‐soluble polyester surfactants. II. Preparation and surface activity of silicone‐modified polyester surfactants

We prepared a novel series of water‐soluble silicone‐modified polyesters [poly(ethylene glycol) (PEG)–silicone polyesters] by reacting organopolysiloxane with a hydroxy‐terminated polyester. The polyesters were obtained by the polymerization of maleic anhydride and PEGs (molecular weights = 2000, 4000, 6000, 8000, and 10000). These water‐soluble PEG–silicone polyesters can be used as auxiliaries in dyeing process because they exhibit good surface activities such as surface tension, low foaming, and wetting power. The presence of these surfactants also retarded the rate of nylon dyeing with acid dyes. The retarding effect and low‐foaming property of these novel PEG–silicone polyesters make it possible for these surfactants to be used as leveling agents for modern nylon dyeing with acid dyes. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3005–3012, 2002