Spouted and spout-fluid bed combustors 1: Devolatilization and combustion of coal volatiles

The devolatilization and volatile combustion of a single coal particle in spouted and spout-fluid beds have been studied. The results showed that the flame extinction time increases with the particle diameter, and decreases with the bed temperature. When the bed temperature and the air flow rate were fixed, the operation modes (spouted or spout-fluid bed) showed less effect on the mean flame extinction time. A mathematical model of the spouted bed mode for preignition and postignition periods has also been developed assuming the devolatilization rate to be controlled by heat transfer and multireaction pyrolysis kinetics based on volatile products. Ignition, heat transfer back from the volatile flame to the particle surface, variation in flame temperature, and the hydrodynamics of SB are taken into account. The model predictions, with some adjusting parameters, were in good agreement with experimental results.     

Characterization of Thai limestone for desulphurization in a fluidized bed combustor

The objective of this study is to determine the chemical kinetics of desulphurization of Thai limestone in an atmospheric fluidized bed combustor (AFBC). The experiments, which employed the batch technique using the limestone samples from six major sources in Thailand, were performed in a laboratory‐scale AFBC. The results obtained were analysed and correlated in the form of apparent reaction rate and deactivation rate constants as a function of operating conditions of the furnace and their properties, respectively. The formulae derived from these correlations were kept as general as possible in order that they could be used as input parameters for the selected mathematical model of desulphurization in an AFBC that is suitable for practical use. The predicted results were in good agreement with the experimental data reported in the literature. Copyright © 2003 John Wiley & Sons, Ltd.     

Characterization of Apo-Form Selective Inhibition of Indoleamine 2,3-Dioxygenase**

Indoleamine-2,3-dioxygenase 1 (IDO1) is a heme-containing enzyme that catalyzes the rate-limiting step in the kynurenine pathway of tryptophan (TRP) metabolism. As it is an inflammation-induced immunoregulatory enzyme, pharmacological inhibition of IDO1 activity is currently being pursued as a potential therapeutic tool for the treatment of cancer and other disease states. As such, a detailed understanding of the mechanism of action of IDO1 inhibitors with various mechanisms of inhibition is of great interest. Comparison of an apo-form-binding IDO1 inhibitor (GSK5628) to the heme-coordinating compound, epacadostat (Incyte), allows us to explore the details of the apo-binding inhibition of IDO1. Herein, we demonstrate that GSK5628 inhibits IDO1 by competing with heme for binding to a heme-free conformation of the enzyme (apo-IDO1), whereas epacadostat coordinates its binding with the iron atom of the IDO1 heme cofactor. Comparison of these two compounds in cellular systems reveals a long-lasting inhibitory effect of GSK5628, previously undescribed for other known IDO1 inhibitors. Detailed characterization of this apo-binding mechanism for IDO1 inhibition might help design superior inhibitors or could confer a unique competitive advantage over other IDO1 inhibitors vis-à-vis specificity and pharmacokinetic parameters.     

Fabrication and Optical Properties of Periodic Ag Nano‐Pore and Nano‐Particle Arrays with Controlled Shape and Size over Macroscopic Length Scales

A facile and economical route to preparation of highly ordered sliver pore or particle arrays with controlled pore‐shape and size extended over cm² areas is described. The substrates are prepared at planar and curved surfaces via sphere‐imprinted polymer (PDMS) templating using polystyrene spheres with diameters of 820, 600, or 430 nm. Nano‐pore arrays are created by sputtering 80 nm of Ag directly onto the templates and nano‐particle arrays are prepared by electrode‐less deposition of Ag from Tollen's reagent. The shape of the nano‐pore or particles in the array conformed to that of the imprint of the sphere on the template. Stretching the flexible template enable creation of cuboid shaped nano‐voids and nano‐particles following Ag deposition. Diffuse reflectance from the spherical Ag nano‐cavity arrays showed absorbance maxima at wavelengths comparable similar to the diameter of the templating sphere, whereas reflectance from the cuboid arrays, showed little correlation with the sphere diameter. The cuboid nano‐particle arrays showed the most intense visible absorption which is red‐shifted compared to the spherical arrays. White light diffraction from the arrays, observed by rotating 1 cm² substrates relative to a fixed light source, reflected exactly the symmetry axes of the periodic nano‐features in the arrays demonstrating the remarkable macroscopic order of the periodic structures. Raman spectra of 1‐benzenethiol adsorbed at the arrays indicated SERS enhancements from the substrates are attributed mainly to surface nano‐roughness with only moderate contributions from the periodically corrugated structures. Despite excitation at the major resonance dip in the reflectance spectrum, a weak, localized rim dipole mode is found to elicit a small increase in the SERS enhancement factor for the 430 nm diameter spherical arrays. FDTD studies of nano‐void arrays provided insights into v arious factors affecting the SERS experiment and confirmed the array's plasmonic spectra are dominated by propagating plasmon modes under microscope excitation/collection angles.     

Effect of Storage Conditions on 2–Acetyl-1–pyrroline Content in Aromatic Rice Variety, Khao Dawk Mali 105

ABSTRACT: The effect of package and temperature on 2–acetyl-1–pyrroline content in milled aromatic rice during storage was investigated. 2 -Acetyl-1 -pyrroline content was decreased faster at higher storage temperature. However, fat acidity of rice was increased during storage and inversely correlated with 2–acetyl-1–pyrroline content at an early stage of storage. The difference in 2–acetyl-1 -pyrroline recovery from the samples, which were extracted with ethanol at 40 °C and 75 °C, revealed that the starch bound and free forms of 2–acetyl-1–pyrroline may occur in aromatic rice. These results suggested that the biosynthesis of 2–acetyl-1 -pyrroline before starch structure formation in rice kernel could play a key role in the aroma quality of aromatic rice.     

Quantitative analysis for reaction between epoxidized natural rubber and poly (L‐lactide) through 1H‐NMR spectroscopy

Reaction between epoxidized natural rubber and poly(L ‐lactide) (PLLA) was investigated quantitatively in terms of conversion of the epoxidized natural rubber. The epoxidized natural rubber was prepared by epoxidation of high ammonia natural rubber (HA‐NR) or deproteinized natural rubber (DPNR) with peracetic acid followed by depolymerization with ammonium persulfate. The resulting liquid HA‐NR having epoxy group (LENR) or liquid DPNR having epoxy group (LEDPNR) were subjected to heating at 473 K for 20 min, after blending with PLLA. The products were characterized through morphology observation, DSC measurement, and ¹H‐NMR spectroscopy. The conversions of the rubbers were estimated from intensity ratio of signals in ¹H‐NMR spectrum for the products after removing unreacted rubber with toluene. Difference in the estimated conversion between the LENR/PLLA and LEDPNR/PLLA blends was interpreted in relation to proteins present in the rubber. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

高吸水性树脂的性能研究

高吸水性树脂作为一种功能高分子,其应用越来越广,是一种很有发展前途的新材料。本 文介绍了高吸水性树脂的特点、性能、结构、吸水机理及性能测试方法。     

Antifungal activity of edible coating made from chitosan and lactoperoxidase system against Phomopsis sp. RP257 and Pestalotiopsis sp. isolated from mango

Lactoperoxidase system (LPOS) was incorporated into chitosan solutions (0.5, 1, and 1.5%) to protect mangoes against two strains of fungi. Coating solutions effectiveness in vitro (in Petri dish) and in vivo (on mango) were studied on fungal (Phomopsis sp. RP257 and Pestalotiopsis sp.) growth isolated from mango cv Amelie. In vitro, chitosan concentration at least 1% containing or not LPOS effectively inhibited Pestalotiopsis sp. growth at 100%. Presence of LPOS or Lactoperoxydase system with iodine (LPOSI) in chitosan at 0.5% increased the percentage of inhibition from 26 to 93%. Edible films with LPOS inhibited Phomopsis sp. RP257 particularly when LPOS was incorporated in chitosan concentrations of 1 and 1.5%. Iodine did not influenced antifungal activity of LPOS against Pestalotiopsis sp. but decreased activity antifungal toward Phomopsis sp. RP257. The properties (water vapor permeability and mechanical properties) of chitosan films were not significantly changed by the incorporation of the enzyme system. in vivo condition, chitosan coating at 1 and 1.5% with or without enzyme system was sufficient to inhibit totally (100%) Pestalotiopsis sp. and was 60% efficient against Phomopsis sp. with chitosan only at 1 and 1.5%. However, when coating solution mainly at 1 and 1.5% was enhanced by LPOS with or without iodine, it inhibited totally (100%) Phomopsis sp. RP257. The presence of iodine slightly reduced antifungal activity against Phomopsis sp. RP257.     

Removal of proteins from natural rubber with urea and its application to continuous processes

The removal of proteins from natural rubber through a batch process was studied by the incubation of the rubber latex with urea in the presence of sodium dodecyl sulfate. Under suitable conditions, the total nitrogen content of deproteinized natural rubber (DPNR) decreased from 0.38 to 0.02 wt % after incubation for 10 min; this was similar to that of the rubber deproteinized with a proteolytic enzyme for 12 h. For applications, continuous incubation and centrifugation were individually investigated by the use of a semicircular channel and a continuous centrifuge, respectively, to scale up DPNR preparation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Compatibilization of recycled poly(ethylene terephthalate) and polypropylene blends: Effect of polypropylene molecular weight on homogeneity and compatibility

The effectiveness of compatibilizers in enhancing the dispersion of polypropylene (PP) at various molecular weights in recycled polyethylene terephthalate (RPET) was elucidated. The idea of incorporating PP of different molecular weights evolved from the intention of simultaneously recycling the PET bottles together with the PP‐based bottle caps, which are often of low molecular weight (M_w). Three grades of PP with known molecular weights were blended with RPET at various loadings of compatibilizers. Morphological analyses suggest that the dispersion of the PP particles was more homogeneous, and the average particle size was smaller when low M_w PP was incorporated. This indicates that the interaction between the compatibilizer and PP particles was more intense with the presence of a large number but shorter PP molecular chains. Moreover, specimens containing low M_w PP were found to remain homogeneous regardless of compatibilizer and PP content in the RPET/PP blends. The homogeneity of the blends significantly affected their mechanical performance as well. Higher stiffness, yield strength, deformability, and toughness were observed when low M_w PP was incorporated, regardless of PP and compatibilizer loadings. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012