Precise Extraction of Charge Carrier Mobility for Organic Transistors

Unreliable mobility values, and particularly greatly overestimated values and severely distorted temperature dependences, have recently hampered the development of the organic transistor field. Given that organic field‐effect transistors (OFETs) have been routinely used to evaluate mobility, precise parameter extraction using the electrical properties of OFETs is thus of primary importance. This review examines the origins of the various mobilities that must be determined for OFET applications, the relevant extraction methods, and the data selection limitations, which help in avoiding conceptual errors during mobility extraction. For increased precision, the review also discusses device fabrication considerations, calibration of both the specific gate‐dielectric capacitance and the threshold voltage, the contact effects, and the bias and temperature dependences, which must actually be handled with great care but have mostly been overlooked to date. This review serves as a systematic overview of the OFET mobility extraction process to ensure high precision and will also aid in improving future research.     

Numerical Investigation of the Capture of Polydisperse Particles by Charged Droplets

The capture of particles by charged droplets was simulated by considering the electrostatic interactions of droplet-droplet and droplet-particle. The results indicate that the electrostatic repulsion between droplets leads to a dynamic accumulation mode of particles. However, the droplet spacing has an insignificant effect on the capture efficiency when the electrostatic deposition predominates. The increase of droplet charge remarkably improves the capture efficiency, in which the capture of fine particles accounts for the largest proportion. Compared to the droplet charge, the droplet size shows a limited improvement in the capture efficiency. Reducing the droplet velocity prolongs the capture time instead of enhancing the capture capacity per unit time, thereby improving capture efficiency.     

低渗低温低压水敏性储气层压裂改造技术研究与应用

低渗低温低压水敏性储气层因压裂液快速破胶困难、黏土膨胀水敏伤害严重和压后压裂液返排动力不足等因素，使得压裂增产面临诸多难题。针对上述难题进行了技术攻关，形成了弱交联、低温活化剂与超量破胶剂的低温储层快速破胶技术、有机盐与无机盐双元体系复合防膨技术以及高比例液氮全程助排的排液技术。该压裂增产改造技术使牛101井头屯河组首次获得工业油气流，扩展了三塘湖盆地勘探空间。     

玻璃碳电极的激光改性处理

玻璃碳电极（ＧＣＥ）用激光脉冲照射处理后，电化学反应行为发生很大变化。背景电流减小，Ｆｅ３＋／Ｆｅ２＋氧化还原电对的电极反应速率显著提高，抗坏血酸（ＡＡ）在电极上呈现明显的吸附作用。     

NK-EH500调质钢爆炸硬化的冲击动力学研究

通过试验并运用爆炸冲击动力学理论NK－EH500调质钢爆炸硬化进行了深入的研究，结果表明，金属材料存在硬化极限，调整炸药组成改变爆炸硬化可以满足不同金属材料的硬化要求，隔离式爆炸硬化有利于保护硬化工件外观的完整性，本研究对拓展爆炸硬化在实践中的应用领域具有重要的理论指导意义。     

捞油车自动排绳控制装置

针对部分油田采用捞油的采油方式，介绍的自动排绳装置，是双通道化例闭环控制系统，特点是按照输入的给定、误差信号方向、大小变化，输出信号的方向、大小随之变化，自动跟踪，自动补偿，输出速度连续无级变速，可以手动和自动工作。     

两缸天然气发动机工作均匀性分析

对一台火花点火式两缸天然气发动机进行了缸内示功图、进气压力波、空燃比、缸盖及活塞温度场和排放等项目的测试。试验和分析表明，两缸进气道中存在着明显的压力波动，波动程度取决于发动机工况。两缸混合气的质和量都不均匀，一缸空燃比偏浓，燃烧不完全，后燃倾向大；二缸空燃比较合适，燃烧过程较完善。两缸的尾气排放量相差不大。据此，可应用稀燃、快燃技术，以提高燃烧速度，改善燃烧过程；同时调整进气系统特性，将两缸混合气的质和量的不均匀性降到最低限度。     

Memory-related changes of nitric oxide synthase activity and nitrite level in rat brain

The changes of nitric oxide synthase (NOS) activity and nitrite level in rat brain regions after spatial learning were investigated. NOS activity was assayed by conversion of [3H]L-arginine to [3H]L-citrulline, and a sensitive fluorometric assay for quantification of nitrite was used. Compared with sham-trained rats, NOS activity and nitrite level in hippocampus and cortex, and also the nitrite level in cerebellum, was elevated significantly one day after rats had learnt a water-rewarded spatial alteration task. These results suggest a spatial memory-related changes of endogenous NO in rat brain, and support the idea that NO participates in learning and memory processes.     

替代进口梳棉机测厚传感器集成电路芯片分立元件的电路设计

介绍了替代进口梳棉机测厚传感器集成电路分立元件的电路图，工作原理及特点。一年多的实际运行证明，电路参数达到了设计要求。