PID Control of Planar Nonlinear Uncertain Systems in the Presence of Actuator Saturation

This paper investigates PID control design for a class of planar nonlinear uncertain systems in the presence of actuator saturation. Based on the bounds on the growth rates of the nonlinear uncertain function in the system model, the system is placed in a linear differential inclusion. Each vertex system of the linear differential inclusion is a linear system subject to actuator saturation. By placing the saturated PID control into a convex hull formed by the PID controller and an auxiliary linear feedback law, we establish conditions under which an ellipsoid is contractively invariant and hence is an estimate of the domain of attraction of the equilibrium point of the closed-loop system. The equilibrium point corresponds to the desired set point for the system output. Thus, the location of the equilibrium point and the size of the domain of attraction determine, respectively, the set point that the output can achieve and the range of initial conditions from which this set point can be reached. Based on these conditions, the feasible set points can be determined and the design of the PID control law that stabilizes the nonlinear uncertain system at a feasible set point with a large domain of attraction can then be formulated and solved as a constrained optimization problem with constraints in the form of linear matrix inequalities (LMIs). Application of the proposed design to a magnetic suspension system illustrates the design process and the performance of the resulting PID control law.      

Enhanced strains of Nb-doped BNKT-4ST piezoelectric ceramics via phase boundary and domain design

A strategy that constructs the morphotropic phase boundary and manipulates the domain structure has been used to design the component of 0.96[Bi_0.5(Na_0.84K_0.16)_0.5Ti_(1-x)Nb_xO₃]-0.04SrTiO₃ (BNKT-4ST-100xNb) to enhance the strain properties for actuator application. Non-equivalent Nb⁵⁺ donor doping modulates the phase transition from the mixture of rhombohedral and tetragonal phases to the pseudocubic phase and results in the coexistence of multiple phases. Moreover, the high-resolution TEM confirms the existence of polar nano regions that contribute to the macroscopic relaxor behaviour. The size of the domains is reduced with increasing Nb⁵⁺, resulting in an enhanced relaxor behaviour. The ferroelectric-relaxor transition temperature decreases from 85 to below 30 °C, implying a non-ergodic to ergodic relaxor transition. An improved strain of 0.56% and a giant normalized strain of 1120 pm/V were achieved for BNKT-4ST-1.5Nb, which were attributed to the unique domain structure in which nanodomains are embedded in an undistorted cubic matrix. Ferroelectric, antiferroelectric, and relaxor phases coexist. As the electric field is large enough, a reversible phase transition occurs. Furthermore, good temperature stability was obtained due to the stability of the nanodomains, and no degradation in strains was observed even after 10⁴ cycles, which may originate from the reversible phase transition and dynamic domain wall. The results show that this design strategy offers a reference way to improve the strain behaviour and that BNKT-4ST-100xNb ceramics could be a potential material for high-displacement actuator applications.     

Real-time molecular characterization of air pollutants in a Hong Kong residence: Implication of indoor source emissions and heterogeneous chemistry

Due to the high health risks associated with indoor air pollutants and long-term exposure, indoor air quality has received increasing attention. In this study, we put emphasis on the molecular composition, source emissions, and chemical aging of air pollutants in a residence with designed activities mimicking ordinary Hong Kong homes. More than 150 air pollutants were detected at molecular level, 87 of which were quantified at a time resolution of not less than 1 hour. The indoor-to-outdoor ratios were higher than 1 for most of the primary air pollutants, due to emissions of indoor activities and indoor backgrounds (especially for aldehydes). In contrast, many secondary air pollutants exhibited higher concentrations in outdoor air. Painting ranked first in aldehyde emissions, which also caused great enhancement of aromatics. Incense burning had the highest emissions of particle-phase organics, with vanillic acid and syringic acid as markers. The other noteworthy fingerprints enabled by online measurements included linoleic acid, cholesterol, and oleic acid for cooking, 2,5-dimethylfuran, stigmasterol, iso-/anteiso-alkanes, and fructose isomers for smoking, C₂₈-C₃₄ even n-alkanes for candle burning, and monoterpenes for the use of air freshener, cleaning agents, and camphor oil. We showed clear evidence of chemical aging of cooking emissions, giving a hint of indoor heterogeneous chemistry. This study highlights the value of organic molecules measured at high time resolutions in enhancing our knowledge on indoor air quality.     

以用户为中心的可见光通信协作传输中训练资源分配算法

以用户为中心的可见光通信协作传输是近年来出现的新架构,这导致虚拟小区之间出现重叠。为避免导频污染问题,每个虚拟小区中的光接入点(AP)或者虚拟小区中选择相同AP的用户发送的训练序列应该是正交的。针对可见光通信中以用户为中心的协作网络,研究训练资源的正交分配问题,提出了一种新的导频分配算法,联合导频分配和用户选择问题,以期最大限度地增加虚拟小区内可被接入的用户数。分析和仿真结果表明,该导频分配方案可以有效改善导频污染问题,提高训练资源利用率,并且相比已有的导频分配方案,性能有所改进。     

Effects of Rare Earths on Toughness of 31Mn2SiRE Wear-Resistance Cast Steel

The toughness of 31Mn2SiRE wear-resistance cast steel were increased by means of RE compound modification and high temperature austenitizing. The results show that the microstructures can be refined, needle and network ferrite are eliminated, the dislocation density and the quantity of dislocated martensite are increased remarkably, and the shape and distribution of inclusions are improved by the addition of RE. Therefore, the mechanical properties of the modified steel can be greatly increased, especially the toughness (αK) by 44%, yield strength (σs) by 10%, and elongation (δ5) by 42%.     

A Novel Body-tied Silicon-On-Insulator(SOI) n-channel Metal-Oxide-Semiconductor Field-Effect Transistor with Grounded Body Electrode

A novel body-tied silicon-on-insulator(SOI) n-channel metal-oxide-semiconductor field-effect transistor with grounded body electrode named GBSOI nMOSFET has been developed by wafer bonding and etch-back technology. It has no floating body effect such as kink phenomena on the drain current curves, single-transistor latch and drain current overshoot inherent in a normal SOI device with floating body. We have characterized the interface trap density, kink phenomena on the drain current (I_DS-V_DS) curves, substrate resistance effect on the I_DS-V_DS curves, subthreshold current characteristics and single transistor latch of these transistors. We have confirmed that the GBSOI structure is suitable for high-speed and low-voltage VLSI circuits.     

钙矾石膨胀机理的SEM研究

本文利用扫描电镜观察了在具有不同矿物组成的系统中生成的钙矾石的形成与膨胀机理。发现能够产生膨胀的钙矾石是由局部化学反应所生成；它们在未水化的铝酸盐矿物表面原地结晶，呈放射状生长。通过溶解，沉淀生成的钙矾石不能凝结，没有膨胀性。     

基于BA-WPHM的滚动轴承两阶段剩余寿命预测方法

为了提高滚动轴承剩余寿命预测的准确性,根据滚动轴承运行过程的两阶段性特点,提出了一种基于蝙蝠算法(BA)和威布尔比例风险模型(WPHM)的滚动轴承两阶段剩余寿命预测方法。首先,构建基于WPHM的剩余寿命预测模型;其次,提出了两阶段极大似然估计法,建立新的似然函数,并利用BA算法进行求解,以提高参数估计的准确性;最后,建立BA-WPHM模型对滚动轴承进行剩余寿命预测。案例分析表明,相比于Newton-Raphson算法、自组织分层猴群算法(SHMA)和独特的自适应粒子群算法(UAPSO),提出的方法参数估计的准确性更高,剩余寿命的预测精度优于支持向量回归(SVR)方法,验证了所提方法的有效性,为滚动轴承维修决策的可行性提供了依据。     

P+RE变质对过共晶Al-Si合金组织性能的影响

以过共晶Al-Si合金为研究对象，分析了P＋RE变质对合金组织及力学性能的影响，并分析探讨了其强化机制。结果表明，变质后合金组织中粗大块状、条状的初晶Si尺寸明显细化，粗大针状的共晶Si变为纤维状或短杆状，合金的力学性能提高。当P含量为0．08％和RE含量为0．6％时，其室温和高温力学性能最好，室温抗拉强度从未变质的236．2MPa提高到287．6MPa，高温抗拉强度从142．5MPa提高到210MPa，分别提高了22％和47％；伸长率分别提高了57％和42％。初晶Si的变质以AIP异质形核作用机理为主，共晶Si以RE吸附产生孪晶为变质机制。     

Calcium binding mode of {gamma}-carboxyglutamic acids in conantokins

Conantokin-T (con-T) and conantokin-G (con-G) are two highlyhomologous peptide toxins found in Conus venom. The former isa 21-residue peptide with four -carboxyglutamic acid (Gla) residues(at positions 3, 4, 10 and 14), while the latter is a 17-residuepeptide with five -carboxyglutamic acid residues (at positions3, 4, 7, 10 and 14). Despite the apparent similarity in numberand relative positions of the -carboxyglutamic acid residues,¹¹³Cd-NMR studies indicated a distinct metal binding behaviorfor con-G and con-T. There appears to be four binding sitesin con-G in contrast to one metal binding site in con-T. Toelucidate the mode of calcium binding by the -carboxyglutamicacid residues in these conantokins, we designed various analogouspeptides with their -carboxyglutamic acid replaced by otheramino acid residues. ¹¹³Cd-NMR experiments on conantokin analoguesreveal that the major difference in the number of metal bindingsites between con-G and con-T is due to the residue at position7. We also performed molecular simulations to calculate therelative binding free energies of several potential bindingsites. Based on our theoretical and experimental results, wepropose a `four-site' binding model for conantokin-G and a `single-site'binding model for conantokin-T.